Heart failure level 2 can not work in the high sea dial area, what should I do

From a medical point of view, you can only change to work at a low altitude, if you have a family bond, see if you can apply for a transfer with the unit, life is the most important, other jobs, family, friends, you can have anything when you go to the right area, want to open a little, this is also the beginning of a new life, maybe bring you a lot of good luck!

This one is going to work in the plains.

Pay attention to your body when you work, and don't do high-physical work.

If possible, rest at home.

1.In general, patients should sleep in a high pillow position; Heavier patients are placed in a semi-recumbent or sitting position.

2.Limit physical activity, patients with severe heart failure are mainly on bed rest; After cardiac function improves, patients should get out of bed appropriately to avoid thrombosis of the lower extremities and lung infection.

3.Be sure to quit smoking, stop drinking, maintain a balanced mindset, and get enough sleep.

4.Eat small meals frequently, eat a low-salt diet, and the daily salt should not exceed 5 grams.

5.Take your medication as prescribed; prevention of respiratory tract infections; Women of childbearing age should use contraception.

Resources.

No, the air is dilute by the high sea, which can easily cause the patient's condition to worsen.

No, for the sake of the body, it is better to eliminate this plan.

Stick to your medications, don't do strenuous exercise, keep your mood calm, and the most important thing: go to the doctor immediately if you feel unwell.

The working principle of the relay and the contactor is the same, but the power is different! They all work according to the way the energized suction and the power-off spring springs up, and at high altitudes, the earth's gravitational pull will become smaller, which will cause it to engage early and release it to be delayed!

Not just the ones you say, all electronic components and equipment should be aware of the altitude. There are several reasons to pay attention to the altitude.

1. The higher the altitude, the lower the temperature, and the temperature affects the conductivity, mechanical strength, and service life of electronic components.

2. The higher the altitude, the thinner the air, most of the switch components and arc extinguishing systems use air arc extinguishing, and the air concentration is related to the arc extinguishing effect.

This can't be helped, just go will definitely not adapt to the high-altitude climate and environment, eat some rhodiola, then drink plenty of water, avoid doing a lot of exercise and eating too much food before going to bed, and eat some light food at night.

The reason for the hard disk, because the inside of the hard disk is vacuum, in high altitude areas due to low air pressure will cause the hard disk to not work.

I guess it's the battery usage that will have an impact! Probably not!

No problem at all! Self.

I myself am a moderately anemic patient, hemoglobin is only about du, and I also passed by Qinzhiling when I was studying in Xi'an, and I didn't see any abnormalities. At the top of Huashan Mountain (2000 meters above sea level), I also did not feel breathless. The altitude of the train through the Qinling Tunnel is 1009 meters, even if you take another route, I think the altitude is not high, and the time through the Qinling Mountains is not long, it is impossible to have any damage to the human body.

As for the amount of altitude you said about causing damage to the human body, just look at this diagram, it's very intuitive, but I think the above is the reaction after being at that altitude for a long time.

The hard drive is characterized by a fully enclosed interior. It is filled with a certain amount of gas and has a very high degree of cleanliness. This prevents the aluminum disk from oxidizing and prevents dust from falling onto the disk (the head is suspended on the disk at a very small distance, and you can block the head with a handprint, so you can't repair the hard drive).

When the hard disk is working at high speed, the heat of the motor and the heat of the disk friction filling gas are very large (you can know this by touching the computer hard disk). Based on the principle of thermal expansion and cold contraction, the hard disk cannot be all-steel, but must be opened and a rubber pad must be added to buffer the expansion of the filling gas and achieve a balance between internal and external pressure. It won't break the hard drive.

For this reason, hard drives cannot be made into a vacuum. Otherwise, either the hard disk is made of high-strength steel, and the volume, weight, power, and noise are extremely high. Either it is flattened by atmospheric pressure.

However, the atmospheric pressure at extremely high altitudes decreases, and it is possible that the hard disk will burst when it is working, so it is not recommended to use ordinary hard disks at high altitudes. And the altitude we took on a business trip to Qinghai last time"The hard drive works perfectly!