What are the precautions for picking up the new Baojun E200?

During the test drive, some special road sections should be selected for test driving, and after these road surfaces, it is enough to check the sound insulation of the original car, the condition of the engine and gearbox, as well as the shock absorption and braking performance.

When operating, the acceleration should be gradual, the gear shift should be about 2000 rpm, and the speed should not be higher than 120km h. During driving, observe whether sitting in the car is stable when idling; Pay attention to the sound of the engine, feel the basic situation of sound insulation, whether the sound of engine operation is regular, and whether the acceleration response is fast. Pay special attention to the sound of the engine when refueling at low speeds, that is, what is the state when the engine is more strained, if the noise seems messy, then it is recommended to make another choice.

You can find a speed bump and drive it up and down slowly, feel how the shock absorption and sound insulation are, and pay attention to whether the interior of the car is vibrating. If so, there may be a problem with the installation of doors, windows, chairs, instrument panels, or A, B, and C pillar trims. Check the steering wheel to drive at a constant speed, try to let go of the steering wheel to see if the car is running off.

This is normal due to the slightly sluggish throttle of the new car, but it will behave smoothly after that.

There are three main aspects of the Baojun E200 maintenance project: first, the three-electric system, which tests the performance and appearance (including the circuit) of the battery, motor and electronic control unique to the new energy vehicle, and detects whether there are potential system failures, and whether there are potential risks such as wear, scratches, and ablation on the surface;

The second is chassis and brake system detection, checking chassis fastener torque, braking system.

the status of the relevant pipes and connectors; Check the reducer.

whether the oil is to be replaced; Brake fluid.

whether it is to be replaced, etc.;

Finally, there is the professional inspection of the easily consumable parts, such as: tires, lights, wipers, air conditioning filters, door locks, etc.

1.Prepare all the information.

When picking up the car, the following information is essential: 1. My ID card; 2. If it is a non-local household registration, a residence permit or temporary residence permit is also required; 3. Printout of the notification of the winning index; Fourth, the most important bank card or cash is essential.

2.Pick-up inspection.

Check whether the exterior is intact and free of scratches, the interior is clean and undamaged, the seat stitches are firm, and the seals are free of warping cracks; Whether the various electrical equipment in the car, such as audio, air conditioning, lighting and lighting system, are normal; whether the tire is dented and whether the tire pressure is normal; Finally, get in the car and drive two laps to try the car on the power unlock start, accelerate braking and comfort experience.

Electric vehicles also need to look at the number of kilometers, which is generally regarded as normal within a few tens of kilometers. Also pay attention to the accessories that come with the car, such as the charging cable with three plugs, spare tires, tools, and whether the vehicle instructions and warranty manual are complete. In particular, if you don't pick up the car at that time, you should take a picture of the identification code at the bottom left of the front windshield of the vehicle to prevent the vehicle from being replaced and causing unnecessary trouble.