The computer is turned on and the interface does not move

The computer boot has been stuck in the motherboard logo interface, indicating that the problem was found during the power-on self-test, and it needs to be checked one by one, and the problem can be entered normally after the problem is solved.

1. If you can't enter the system when you boot up the motherboard logo, you need to restart the TAB button to skip the logo screen or press the DEL key continuously (F2 or other designated hotkeys for the notebook) to enter the CMOS setting interface, and turn off the Full Screen Logo Show in the Advanced BIOS Features tab to see if the POST information can be displayed, and then determine the problem.

2. Under normal circumstances, according to the prompt information of the black screen and white characters on the screen, press the F1 key to skip the non-fatal error and start the computer directly, or press the del key to enter the CMOS, and then press F9 to load the predefined parameters or select Load Optimized Defaults (load the high-performance default) or Load Fail-Safe Defaults (load the fail-safe default), and then press F10 to save and exit the restart.

3. If the original CMOS parameters are not saved or the system time in CMOS is restored to the factory time after the shutdown and power off, it may be that the motherboard battery is invalid, and the battery needs to be replaced, and then load the predefined parameters and save them according to step 2.

4. If the above operations are invalid, it means that there is a problem with the hardware, generally due to poor contact of the memory due to oxidation, or the hard disk may be damaged due to poor connection or hard disk master boot record, you need to re-insert the memory or hard disk, or repair the hard disk master boot record, or reinstall the system or replace the hard disk.

Hello, happy to answer your questions. If you have such a problem, you can restart it to see, or press the F1 key to see if it can boot up normally. If it is a new machine, you can contact the merchant to solve the problem after after-sales.

The computer won't turn on, and the press f11 for bbs popup appears

1. First shut down or restart the computer, and quickly press the F10 button to enter the BIOS when starting the computer

2. Then the boot will enter the BIOS interface, the default is some basic information, select the system settings option on the right in the title bar.

3. Enter the interface of system settings, select the startup option, and press the enter key to enter.

4. Enter the interface of the startup options, select the traditional mode option, at this moment you can see that the back is disabled, press the enter key to select open.

5. A small window will pop up with the slag, select the enable option here, or press the enter key to confirm. Lu quietly.

6. Then a small window will pop up, prompting that you may not be able to enter the operating system if you change the settings, click Yes here.

7. After all the base years are set, press the F10 button on the keyboard, and then the window of save and exit will pop up, click here to save the settings, and the computer will automatically restart.

There is a relatively large possibility of a hard disk problem this Xiang,Look at the picture has been checked and tested memory,The next is the hard disk,The card can't go down here,It is estimated that it is a hard disk,Not Sen Xiangbo will be a graphics card,The graphics card will not light up or die with a screen if there is a problem。

Also, can your BIOS get in.