Where is the Dongfeng Tianjin air conditioner dryer?

The adsorption dryer is mainly used in industrial production, which is a solid dehumidification method, and the main adsorbents are silica gel, aluminum glue and molecular sieve. Judging from the characteristics of these adsorbents, there are relatively large voids, and the adsorbed water molecule pressure is less than the surface partial pressure of water vapor in the air, so the adsorption effect is still relatively obvious. After absorbing sufficient water and reaching saturation, it is necessary to carry out desorption and regeneration, so that adsorption can be carried out again, so that the dryer can maintain continuous operation.

The adsorption dryer generally has two towers, one tower is under working pressure to adsorb and dry the air, and the other tower is desorption and regeneration under atmospheric pressure. By alternating between the two of them, the work efficiency has been improved.

Dongfeng Tianjin air conditioner dryer, its location is the most right-hand position in the tire seam is the dryer installed there.

The dryer of the air conditioner is in the dryer of the air conditioner, and there is a small groove in the upper right corner of it.

Hello, Dongfeng Tianjin air conditioner dryer is next to the condenser, and there are monitoring holes on it.

Like the dryer of Dongfeng Tianjin air conditioner, this position is found, and you can get his position out of the upper part directly, and he is basically at the back of the middle position.

1. Liquid storage function: liquid storage is used to store and optimize the liquid refrigerant in the refrigeration system, so that the profit and loss of the liquid refrigerant can be compensated and adjusted when the working conditions change. Generally speaking, when the air conditioning system starts to work, the load is large, and the refrigerant circulation is also large, and when the work is for a period of time, the load will be reduced, and the required refrigerant dose will be reduced accordingly.

2. Filtration: All parts in the refrigeration system should be strictly cleaned and dried before leaving the factory, but when installing the pipeline, it is possible not to pay attention to bringing dirt in, and the pipeline may also produce dirt, such as oxide scale, the refrigerant itself is not so clean, and the powder grinding debris when the compressor is running, etc.

After dawn in the east, I saw that the black position should also be in an ordinary and useful position, and it should be commonly used to catch up to what position it is.

Where is the desiccant of Dongfeng Tianjin air conditioner? Where is the desiccant of Dongfeng Tianjin air conditioner? I think it's better to ask the master who installed the air conditioner.

Dongfeng patio air conditioner where is their dryer located, and their dryer should not be powder inside their air conditioner.

Gout can't forget how the dryer is in what position, this should check the news in this regard, learn more about the situation of users in this area, let's take a look.

Help them both with his air conditioner every day, and his platform is in a very good position to see the season, and we can still hang it to find.

What is the position of Dongfeng Tianjin air conditioner dryer? He should be in the most suitable installation position.

Dongfeng Tianjin air conditioner dryer it should be in, in the middle of the position.

For details, you can check the manual to see where it is placed.

Summary. For the question of changing the desiccant, the first thing to make clear is what the desiccant of the Dongfeng Tianjin dryer is, and the steps to change the desiccant. First of all, the desiccant of Dongfeng Tianjin dryer is generally silica gel desiccant, which is an efficient and environmentally friendly desiccant, which can effectively remove water and keep the air humidity within a certain range.

Secondly, the steps to change the desiccant are as follows:1Turn off the power of the Dongfeng Tianjin dryer, remove the upper cover of the dryer, and clean out the old desiccant; 2.

Put the new desiccant into the dryer, taking care not to pile up the desiccant too high; 3.Install the upper cover of the dryer, turn on the power, and let the dryer start working; 4.Put the old desiccant in the trash and dispose of it in time to avoid environmental pollution.

Finally, when changing the desiccant, it is necessary to pay attention to safety and do not let the desiccant come into contact with ** to avoid injury.

For the question of changing the desiccant, the first thing to make clear is what the desiccant of the Dongfeng Tianjin dryer is, and the steps to change the desiccant. First of all, the desiccant of Dongfeng Tianjin dryer is generally silica gel desiccant, which is an efficient and environmentally friendly desiccant that can remove water and keep the air humidity within a certain range. Secondly, the steps of changing the desiccant are as follows:

1.Turn off the power of the Dongfeng Tianjin dryer, remove the upper cover of the dryer, and clean out the old desiccant; 2.Put the new desiccant into the dryer, taking care not to pile up the desiccant too high; 3.

Install the upper cover of the dryer, turn on the power, and let the dryer start working; 4.Put the old desiccant in the trash and dispose of it in time to avoid environmental pollution. Finally, when changing the desiccant, it is necessary to pay attention to safety and do not let the desiccant come into contact with ** to avoid injury.

Can you elaborate on that a little bit more?

In view of the problem of changing the desiccant in the Dongfeng Tianjin dryer, the first thing to make clear is that the steps to change the desiccant are: first, turn off the power of the dryer, then clean out the old desiccant, put the new desiccant into the dryer, and finally turn the power back on. In the process of changing the desiccant, it should be noted that it is necessary to choose a drying and missing agent suitable for the Dongfeng Tianjin dryer, so as not to affect the normal use of the dryer.

In addition, in the process of changing the desiccant, it is necessary to pay attention to safety to avoid accidents. In addition, when using the Dongfeng Tianjin dryer, it is necessary to pay attention to regularly check the temperature and humidity of the dryer to ensure the normal use of the dryer. At the same time, the filter element of the dryer should be checked regularly to ensure the normal use of the filter element.

Finally, check the power supply of the dryer regularly to ensure the normal use of the dryer.

1. Due to the different working conditions of each vehicle, coupled with the different quality and service life of different brands of drying tanks, there is no unified standard for the replacement cycle. In most cases, it is changed once a year, and Dongfeng Tianjin KR series drying tanks are no exception. Generally, it is changed before winter, and some *** drying tanks can be used for a few years, so the specific lack of caution depends on the situation.

2. There are many reasons why Dongfeng Tianjin KR affects the braking performance, and the drying tank is an important factor that cannot be ignored. The drying tank is used to filter water vapor in the compressed air in the gas system to prevent corrosion of the air reservoir and various pump valves. Therefore, whether the drying tank can work properly directly affects the performance of the brakes.

If inferior products are used, or if the dehumidification function is lost due to long-term non-replacement, the braking safety of the whole vehicle will be seriously affected.

The air dryer heating is to prevent the dryer exhaust port from freezing when it is too cold in winter, which will affect the work of the whole vehicle. When the set temperature is reached, it will automatically start heating, generally about four to seven degrees, and then automatically exit the heating at the set temperature, generally about 29 degrees. This will automatically start to detect when the whole vehicle is powered on.