What should I do if the engine suddenly stops and the steering wheel locks up at high speed?

When the vehicle is driving at high speed, if the engine suddenly stops and the steering wheel is locked, you must turn on the alarm flashing lights of the vehicle at the first time, and then observe the oncoming cars left and right to ensure safety, and evacuate to a safe area in time, and do not stay in the car. After evacuating to a safe area, call High-Speed Rescue** to request rescue, and with the help of rescuers, tow the vehicle to the repair area for inspection and repair.

When encountering a situation where the engine stalls and the steering wheel locks up at high speed, the alarm flashing lights must be turned on first. On the highway, if there is a sudden failure when the car comes, you must turn on the alarm flashing lights at the first time, so as to remind the vehicles behind to avoid traffic accidents in time; Secondly, a tripod is placed 150 meters behind the vehicle. When the vehicle encounters a malfunction, in addition to turning on the alarm flashing lights, a tripod should be placed at least 150 meters directly behind the vehicle, so as to remind the rear of the car to avoid rear-end collision; Finally, leave the breakdown vehicle.

If we say that our vehicle cannot be moved, we must leave the vehicle in time, evacuate to the highway guardrail in time to ensure safety, call rescue**, and patiently wait for the arrival of rescue. <>

When the vehicle is driving on the highway, once a breakdown occurs, the alarm flashing lights should be turned on immediately to remind the rear vehicle to avoid and prevent traffic accidents. <>

If the vehicle breaks down on the highway, be sure to place a tripod at least 150 meters behind the vehicle to alert the rear vehicle to an emergency in front of the vehicle, which is also to avoid accidents. <>

If the vehicle cannot move on the highway, the people in the car should evacuate to the safe area outside the guardrail in time, and then call the rescue**, patiently wait for the arrival of rescue, and must not stay in the car, nor can they stand around the vehicle.

We all know that in fact, driving has brought great convenience to our lives, but sometimes we will encounter all kinds of problems that we are difficult to solve in the process of driving, so some people will have such doubts, that is, the engine suddenly stalls at high speed and the steering wheel is locked, what should we do? For this problem, in my personal understanding, in fact, I think we can start the car and turn the steering wheel at the same time, and at the same time we can also use more effort to brake, let's take a closer look.

1 Turn the steering wheel while starting the car

I believe that everyone has a certain understanding of driving, we all know that in fact, many times when we drive outside, then there will often be some abnormal situations, in this case, in fact, we should also learn to take some effective methods to solve, especially on the highway. We all know that the highway itself is unhearable, but if there is an accident with the car, we can park the car in the emergency lane. When I don't have a sudden engine shutdown and the steering wheel locks up, we can turn the steering wheel while starting the car, so this is a good solution.

2 Applying the brakes is more laborious

We all know that in fact, for most people now, many times we brake is very simple, but if there is a failure on the side, we need to brake more force, for example, in the case of sudden engine shutdown and steering wheel lock, we need to spend more effort to plug in the brakes, because at this time the car may be risky.

So we should pay more attention to this aspect of the problem in our daily life, for everyone, understanding this aspect of the problem is of certain benefit to us, and now we live in such an era, the emergence of the car has brought great convenience to our life but also brought great disadvantages.

Keep calm, try to re-ignite to see if you can start the engine, if you can't start it, press the brake pedal hard, slowly lean to the side of the road, park in the emergency lane, and then put a danger warning sign on the back of the car to avoid a rear-end collision with the vehicle behind, and then wait for the rescue trailer.

Don't be too nervous after this situation, be sure to understand the specific reason, you can pull out the key of the steering wheel, you can also turn the lock slot of the steering wheel, after this situation, you can directly call the towing company's **, and then go to the 4S shop for maintenance or maintenance.

To press the ignition button immediately. You must also choose the P gear, at this time you must slowly turn on the engine, if there is really no way to solve this problem, you must immediately turn on the double flash, to observe the surrounding situation.

The specific reason is most likely that there is a problem with the battery life, so for the sake of safety incidents, the steering wheel will lock up.

The car's powertrain is malfunctioning, the throttle is damaged, the fuel efficiency is insufficient, and the engine is malfunctioning.

It may be that there is some problem with the anti-theft system of the car, and you can restart it at this time, so that the car will be driven out well.

This situation is relatively common, when the direction of the car is killed, the driving resistance is large, and the power required is correspondingly greater. The car is designed and produced with an idle speed setting, that is, the car can still move forward or backward in the idle state without stepping on the accelerator, but when the direction is killed, the car needs to rotate at the maximum, if the idle speed setting is low, you need to give some oil at this time, of course, it is not entirely a problem with the idle speed setting, if the car is not powered enough for other reasons, it will also stall.

Most of them are a sign of insufficient engine power, and it is best to clean the throttle injector.

The steering wheel power must be used for oil pressure, when the steering wheel is killed, the reverse disk oil pressure increases a lot of load on the engine, if it is a small engine, or the old car air intake system has air leakage, in the case of not stepping on the accelerator, the engine can not load a heavier load, it is easy to stall.

In order to prove whether it is because of engine problems, you can add a little throttle to neutral and then kill the steering wheel, and the engine will not turn off.

The bad thing about the steering wheel killing.

1. For hydraulic power models, this will have a certain impact on the oil pressure of the power pump and steering machine. For electronic power steering, this power assist is mainly driven by the torque sensor signal to drive the motor to assist, if the direction is often killed, it will also have an impact on the torque sensor;

2. When the owner kills the steering wheel, the engine needs to output a lot of power to successfully drive the car, because the engine transmits power to the front wheels, and at this time the car clutch is mostly in a state of incomplete closure, and if it is operated like this for a long time, the damage to the clutch can be imagined;

3. Starting in the dead direction, the performance of the car is not good. Because at this time, the angle between the power direction of the vehicle and the forward direction of the vehicle is large, and part of the force is lost.

Reason for flameout:

1. Automatic transmission models: automatic transmission models will not easily stall, while manual transmission models may often stall due to low driving level. However, it is not excluded that automatic transmission cars will not stall, and the main reason is that the engine stalls due to carbon accumulation due to the use of low-quality fuel (many gas stations sell impure oil for profiteering).

2. In addition, the reason for the stalling of the new car (automatic transmission) is mainly caused by the lack of skillful driving skills, and another possibility is the problem of the car engine or the oil circuit, but for the new car, the problem of the engine itself is less likely, and most of the reason is the problem of the oil circuit.

3. Finally, for old models, the reason for the stalling is not enough driving skills, that is, the use of substandard oil to make the engine collect carbon and other causes of stalling.

Your steering wheel power must be used oil pressure, when the steering wheel is killed, the reverse disc oil pressure increases the load of the engine a lot, if you are a small engine, or the old car intake system has a leak, in the case of not stepping on the accelerator, the engine can not load a heavier load, it is easy to stall. I don't believe you can put a little throttle on neutral and kill the steering wheel, the engine won't stall.

Reason: When the steering angle of the vehicle is relatively large, the angle between the rear wheel and the front wheel is large, the turning radius is small, the speed of the rear axle is inconsistent, and the adhesion is inconsistent, resulting in the power of the engine needs to be increased, so your throttle should also be increased accordingly, if you do not increase the throttle, the engine is still working at idle speed, and the engine will definitely stall.

Solution: Control the size of the throttle to make it constant when steering.

Under normal circumstances, if it is just a simple steering wheel to kill, it is easy to stall, which is likely to be due to the oil circuit or the throttle where it does not cooperate well. If it is a manual transmission, it needs to be operated with the clutch, and the automatic transmission needs to check the relevant oil circuit, such as pressing the accelerator to see if it can drive and accelerate normally. If it still doesn't work, it may be that there are some windings in the steering wheel, and it is recommended to go to the 4S shop as soon as possible to check it.

1. ReasonsIf you turn the steering wheel again after parking and pulling the key, the steering lock and steering column will automatically buckle together, thus locking the steering wheel, and then you will no longer be able to turn it, which plays a role in preventing theft.

Second, the solutionFor the car started by the key: the method is very simple, that is, first insert the key into the keyhole, and then turn the key while shaking the steering wheel, until the key can be turned, and the steering wheel will be unlocked!

For the car with button start: don't step on the brakes, gently press the power, shake the steering wheel left and right, step on the brakes, and then press the start button, and the ignition is successful.

There are the following problems with the car stalling when it is killed in the direction:

Pedal clutch problem.

Novices have a problem with clutch stepping on the clutch.

Novices do not control the clutch well, and it is easy to raise the clutch too quickly and the vehicle accidentally stalls when driving. Therefore, when starting with a manual transmission car, the clutch should be well controlled and the left foot should be steady. Although automatic transmission cars rarely stall, if the clutch is lifted too quickly, it will also stall.

Brake problems. Many novices drive manual transmission cars, and when braking, especially when braking suddenly, they often forget to step on the clutch at the same time, which will suffocate the car and turn off. So when braking, either take neutral or press the brakes and press the clutch at the same time. 3/4

The problem of lack of fuel in the car.

Lack of motivation problem.

If there is a serious lack of power while driving, it will also cause stalling.

It should be a misoperation that touched the engine's anti-theft system, and the steering wheel was locked, so there was no need to worry, and the ignition key was removed and the ignition key was restarted every ten minutes or so, and this phenomenon disappeared.

When the steering wheel is locked, the steering wheel does not rotate, the key cannot be screwed, and the car cannot be started, so as to realize the anti-theft function. A steering wheel is a wheel-like device used to control the direction of travel for automobiles, ships, airplanes, etc. The function of the steering wheel is to convert the force exerted by the driver on the edge of the steering wheel into torque and transmit it to the steering shaft, which is mainly composed of a skeleton, foam, and mounting buckles or screw holes corresponding to the main driving airbag DAB.

Engine Considerations.

Engine electronic anti-theft is for the engine installed a set of anti-theft system, the old car ignition key is equipped with an electronic chip, each chip is equipped with a fixed ID (equivalent to the identification number), only the ID of the key chip and the ID on the side of the engine is consistent, the car can start, on the contrary, Shi Pei wide, if inconsistent, the car will automatically cut off the circuit, so that the engine can not start.

The central lock in the car refers to the switch located next to the driver's seat, which is a control device that can control the closing and opening of the whole car door at the same time. This kind of "door lock" control device, as early as the 70s of the last century, has been assembled on the car, after more than ten years, has been more commonly used. The central lock switch in the car is usually installed on the door or center console.

Reason: When the steering angle of the vehicle is relatively large, the angle between the rear wheel and the front wheel is large, the turning radius is small, the speed of the rear axle is inconsistent, and the adhesion is inconsistent, resulting in the power of the engine needs to be increased, so your throttle should also be increased accordingly, if you do not increase the throttle, the engine is still working at idle speed, and the engine will definitely stall.

Solution: Control the size of the throttle to make it constant when steering.

Expert Wang 2010-03-10 15:23:58 Hello Red Wing:

As for your question, when the steering wheel is turned to the dead center position, the load on the engine becomes larger, and if the engine computer cannot control the idle speed well at this time, it will cause the engine to stall. When this kind of fault occurs in a new car, it is important to check the electronic control system, and the idle control system of the electronically controlled engine is mainly composed of various sensors, signal control switches, electronic controllers and idle control valves. According to the input signal of each sensor, the ECU controls the engine to maintain the best working condition, mainly to see whether the input signal from each sensor to the ECU is normal, and whether the actuator is normal.

When the engine is turned off, it is normal for the steering wheel to become heavy or locked.