How to restore the magnetization of the watch after the maintenance of IWC watch, urgent! Urgent! Ur

Magnetic fields are everywhere, and it is impossible to prevent it, and Hublot watches, which have always been very accurate, suddenly have a time error, and the first thing to guess is whether the watch is magnetized. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so watches are very susceptible to magnetization. Once the mechanical watch is magnetized, the first situation that affects it is that the watch is not accurate, there is an error, and in the serious case, the watch stops.

Moreover, in the development of today's social life, more and more electronic products appear around us. Therefore, the magnetic field is present around us, and there is only a difference in the strength of the magnetic field. Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel.

There is also the magnetic buckle on the leather bag, and the watch and credit card are the most afraid of being stained with magnetism. Mechanical watches are generally magnetized to go fast (serious will stop), if the hairspring rings are stuck together, then the Hublot watch will go faster, about 2 hours or so faster. Steel parts are most susceptible to magnetization, including escape wheels and pallet forks.

The simple way to tell is to use a sensitive point compass and lay it flat. Then the watch is quickly and repeatedly skimmed over the top of the compass at close range, and this action also needs to change the watch in a few more directions, and then repeat. As long as the needle of the compass moves, it means that the watch has been magnetized.

The principle of the demagnetizer is that it can produce an alternating magnetic field, and if the watch is put into this magnetic field, it will be demagnetized, and if it is a constant magnetic field, it will be magnetized. Demagnetizers can be bought or made by themselves, and generally professional watch stores have demagnetization services. Moreover, in your daily life, you must be careful not to place your watch near or near electrical appliances that generate magnetic fields (such as stereos, refrigerators, computers, etc.), or magnetic objects (such as magnets, mobile phones).

You can buy a demagnetizer to degauss, and a small demagnetizer costs dozens of dollars.

After the watch is magnetized, it is not used to demagnetize the degaussing rod of the TV factory, but it is difficult to say what the effect is, and the quality of the watch may also be affected to a greater or lesser extent, in short, it is better than nothing.

Because there are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, watches are very easy to be magnetized.

The speed of a mechanical watch is controlled by a hairspring and a balance wheel. When the watch is magnetized, the magnetic force causes the frequency of the balance to swing, so the speed of the gear system also changes, and the watch may stop, slow, or fast. If the symptoms are mild, the daily error is tens of seconds. In severe cases, the daily error is several points.

In daily life, it is necessary to avoid placing the watch next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, magnetic objects (such as magnets, mobile phones), and women use handbags to open and close magnetic buckles, and men use mobile phone covers to turn magnetic buckles, which may cause the watch to be inaccurate or temporarily stopped. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to return to normal.

There is a special mechanical watch demagnetizer for mechanical watch magnetization, and there is no need to open the back cover of the watch, and the demagnetizer can be turned on the watch a few times to eliminate magnetization. You can go to an experienced and professional watch repairer** to deal with it.

What should I do if my watch is magnetized? A small method can be demagnetized at home, saving money and trouble.

Watches often appear next to these electrical appliances (mobile phones, televisions, computers), and after being magnetized, their magnetism will not recede by itself, affecting the timing of the watch at least, or stopping directly. Although you can degauss yourself at home according to the online method, it is easy to have unclean degaussing, which affects the operation of the movement. The need for degaussing is actually very simple, it is recommended that you go to a professional maintenance network to use the demagnetization machine, which can be perfectly solved in a minute or two.

Then go to a professional watch repair point, in a demagnetization, ** is not too expensive compared to this watch, but it is also hundreds of dollars, I feel that it is not cheap for me, you can buy milk powder for children, but it is recommended to go to a professional maintenance point, do not go to the ordinary maintenance point in the mall, although you can also do demagnetization, but you don't want to go to a small shop to repair valuables.

How to deal with the watch stopped by magnetization:

Holding the watch slowly close to the hair dryer, note that you should always keep it in one direction, and then move away slowly, generally to eliminate the lighter magnetism.

Using the degausser, press the red button to open it first, face the watch upwards, keep a certain distance from the demagnetizer, (the mobile phone watch cannot be directly attached to the demagnetizer) pass through the left and right (or from right and left) at a constant speed.

For some watches, it comes with an anti-magnetic device, if there is magnetism, then you should go to a professional watch repair shop to ask the maintenance personnel to replace the anti-magnetic device and demagnetize.

If you touch an object such as a generator or motor with a strong magnetic field while wearing a watch, or if you accidentally place the watch near a radio or television, the watch will be magnetized by the magnetic field of the generator, motor, radio, or television. After the watch is magnetized, not only is it true that the time is not accurate, but some even go very fast. So, how do you demagnetize a watch?

It is best to send the watch repair department to degaussing, because there is special equipment for demagnetization. If it is not convenient to repair it far from the watch shop, you can find an iron block with a circle in the middle, do not be magnetized, stand it upright on the table, and slowly pass the watch through the iron block circle.

You can go to after-sales maintenance, degaussing is OK, and after-sales maintenance is guaranteed, and it is not expensive. Don't just find a small shop to fix it.

Just go to a professional rest shop and do some degaussing.

There is professional degaussing, go to the after-sales service, almost 200 once.

Don't do it yourself, go to the shop and fix it.

The post-processing of the watch is very simple, take it to the customer service center. You don't need to open the cover, you can directly use the degauss device to demagnetize, and the watch can return to normal in 2 seconds. If you want to degauss yourself, you can also try the following two methods.

1. Find an unmagnetized iron ring, put the watch in the ring, wear it slowly, and after a few minutes, the watch will be demagnetized and restored.

2. The effective part of the induction cooker plate is generally round, and the coil is below, if you do not put a large enough steel object, it will generally automatically protect from starting, we had better find a steel water cup (represented by a red circle) filled with water, or other steel containers, in short, do not cover the center of the induction cooker, and it is enough to make the induction cooker start. Then start the induction cooker, it is best to use the maximum power, the watch or tool to be demagnetized, from the far left side of the stove close to the surface of the induction cooker, through the center point of the induction cooker to the right far away, so repeat several times, pay attention to enter from one direction, can play a good degaussing effect.

Magnetization of watches is actually a relatively easy thing to solve. Take it to the customer service center or the watch repairer, do not need to open the cover, directly use the degauser to degauss, and the watch can return to normal in two seconds.

How to tell if your watch is magnetically copyed:

The watch that was originally worn by the end suddenly became larger, and the first thing to guess was whether it was magnetic. The way to judge whether the watch is magnetized is to use a more sensitive compass, put the compass flat on the table, and then quickly repeat the watch at close range over the top of the compass, such an action also needs to change the watch in a few more directions, and then repeat the hundred, as long as the needle of the compass moves, it means that the watch has been magnetized.

The watch is magnetized:

1.The post-magnetization process of the watch is very simple, the degree does not need to open the cover, directly use the demagnetizer to demagnetize, and the watch can return to normal in 2 seconds. (Please pay attention to the method when using the degausser, if you demagnetize too much, the watch will sometimes go faster or slower, and it is best to leave it to a professional).

2.Find an unmagnetized iron ring, place the watch in the ring, wear it slowly, and after a few minutes, the watch will be demagnetized and restored.

Magnetization of the watch: Many things with magnetic fields are often together with the watch, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate. After being magnetized, the watch may stop, slow, or fast.

After the watch is magnetized, its magnetism will not recede by itself, in which case it can only be demagnetized. Therefore, you can only go to a professional watch repair center for demagnetization so that it can return to normal.

Is there a crack, or what's wrong? If the crack is small, you can go to Longines after-sales to polish it, and you don't need to change it. If it is more serious, you can only change one, and you can change it after sale, and it is best to go to the after-sales service. There are original, and the quality is guaranteed.

1. Stop the watch: pull out the watch handle to stop the watch, so that the pointer does not drive the glass chips and scratch the dial and the date disc.

2. You can't dial the hands, you can't adjust the calendar, and you can't try to remove the broken glass of the dial by yourself.

3. Place the watch flat (preferably with the glass side down) and put it in the box to ensure that the watch is not vibrate.

4. Send it to a professional watch shop for repair immediately.

If you have a problem with your watch, you should go to a professional watch service center for maintenance in time, and the specific cost should be determined according to the problem of the watch and the man-hours and accessories spent on maintenance.

When your watch is accidentally dropped to the ground, or the glass of your watch is damaged due to various bumps, depending on the degree of damage, there may be scratches, cracks, broken corners, or complete breakage. If it is only scratches and cracks, it can be improvised, of course, the watch is not beautiful, and the glass of the watch must be replaced if the corners are broken and completely damaged.

Pull out the watch handle and let the watch stop.

You must not dial the hands or adjust the calendar quickly.

Lay your watch flat (preferably with the glass side down) until you reach a service center.

Do not shake or shake violently.

Tell the service center to be careful not to let glass chips damage the dial and watch hands during disassembly and repair.

There are many conditions in life that can cause the glass of a watch to break, depending on the extent of the damage, such as scratches, cracks, broken corners, and complete breakage. If only scratches and cracks can be used, as for the corners of the broken and completely broken, the glass of the watch must be replaced. Serious damage to the glass will lead to poor sealing of the watch, which will affect the waterproof function.

In the case of severe injuries such as explosions, broken corners and severe breakage, and debris covering the dial, it is necessary to take immediate action: pull out the watch and stop the watch. Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards.

You can't dial hands and quick-change dates, and you can't try to remove broken glass from the dial yourself. You should find a clean handkerchief, wrap the watch dial downward, and send it to a professional watch repair agency to hand over to the master for processing!

You can choose to get some large professional and regular watch repair shops to repair and replace, you can go to the center of the city, or look for some larger shopping malls, these places will basically have watch repair shops.

[Watch maintenance and repair can refer to the service center to go to 702, Xidan Joy City Office Building, Xicheng District, Beijing to provide IWC watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance and replacement of damaged parts, and strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

1. Pull out the watch handle and let the watch stop.

2. How to deal with the broken glass of the watch? It is absolutely impossible to dial the hands, nor to quickly adjust the calendar3, and the watch should be placed flat (preferably with the glass side down), until it is sent to the watch repair shop.

4. Do not do violent vibration and shaking during this period.

5. Instruct the watch repair shop to be careful not to let the glass chips hurt the dial and watch hands during disassembly and repair.

Depending on the degree of damage to the glass, there may be scratches, cracks, broken corners, and complete breakage. If the corners are broken and completely broken, the glass of the watch must be replaced.

Table Correct treatment method for glass breakage:

1. Never dial the needle, nor can you adjust the calendar quickly.

2. Remember to pull out the watch handle, let the watch stop, and immediately send it to the after-sales center 3. Avoid severe vibration and shaking during the repair process to cause the watch to be damaged twice.

The above treatment method is to prevent the hand from driving the glass shards to damage the dial twice when moving, so as to avoid greater losses.

Hello, it is possible that the watch is magnetized or the power is insufficient. Once the magnetism on the watch is all of a sudden, it goes very fast, even 1-2 hours a day.

When wearing mechanical watches, pay attention to keep away from magnetic fields, such as stereos, televisions, mobile phones and other electrical appliances.

Magnetization is a common phenomenon nowadays, and the solution is not difficult, just go to the watch for repair and demagnetization, or bring your own demagnetizer, it only takes 30 seconds to demagnetize the watch, and there is no impact on the performance of the watch.

1. Watch magnetization: Watch magnetization is one of the common reasons why watches slow down, even if it is an anti-magnetic watch, even an anti-magnetic watch can not be placed next to some electrical appliances, because some of his parts are not anti-magnetic, and they will still be magnetized over time. The watch is magnetized and needs to be demagnetized by a professional watch repair facility.

2. Insufficient power: mechanical watches are divided into two types: manual winding and automatic winding. Lack of power is often an important reason for the watch to slow down or even stop.

Mechanical watches that are wound by hand can solve the problem by winding, while watches that are self-winding are mostly due to insufficient wearing time (less than 8-10 hours a day) or people who exercise a little bit. Friends in the general office or the elderly often have a mechanical watch with insufficient power, causing the watch to slow down.

3. Mechanical failure caused by insufficient maintenance: daily wear is not paid much attention to, and there are problems such as collisions, which makes the internal parts of the watch loose and causes the watch to be inaccurate. Dust, foreign matter, so that the gear teeth are stuck with each other, and some watches are too much or very little oil, which will make the electronic watch go badly.

If you have any questions, please click on the avatar to consult**, welcome to call.