What should I do if my Hamilton watch is wet, and how long should I take care of my Hamilton watch?

What should I do if my mechanical watch gets wet? Mechanical watches include manual mechanical watches and automatic mechanical watches. The power of these two machines is powered by the mainspring in the movement, and the watch hand is driven forward by the gears, but the power is different.

The movement and exterior components are the key to the composition of a mechanical watch. The movement includes a transmission system, a prime mover system, a pin system for the upper strip, an escapement speed control system, and a pointer system, and the movement parts are put together by bridges and screws; The exterior parts are composed of parts such as the case, dial, hands, and band. Mechanical watches are damp, or water, these situations are more common, below, we will teach you a few ways to deal with the dampness of the watch.

What should I do if my mechanical watch gets wet?

Method. 1. Put the mechanical watch facing inwards and the bottom shell facing outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

Method. 2. If the mechanical watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near the 40-watt light bulb, bake for about 30 minutes, and the water vapor in the table can be eliminated. Do not bake the watch close to the fire, so as not to deform the watch by heat.

If there is water in the watch, you still have to go to the repair shop to wipe the oil and maintain it to prevent the parts inside from rusting.

After the warranty period, it will be sent to a professional repair center for comprehensive maintenance and repair as soon as possible. Don't listen to online home remedies, your watch must be fully serviced if it is wet. Hopeful!

Summary. Hello, maintenance once every 2 to 3 years is enough to prevent the aging of the movement. Because Hamilton watches are a watch brand born in the United States, they need to be maintained in use.

Sometimes we forget to take care of our watch when we use it in our work and life after buying it, which is actually a wrong practice. Generally speaking, the service life of a watch is directly related to the number of times the watch is maintained, although there are some watches that are not maintained for 4-5 years without any problems. However, if the watch is not maintained for a long time, the internal parts of the movement will be seriously worn, and it will be more difficult to repair the watch when it fails.

So for some expensive watches that are often used, we need to maintain the watch every 2-3 years, which can slightly extend the service life of the watch.

Right away. Why not.

Aren't you a**?

Right away. Hello, maintenance once every 2 to 3 years is enough to prevent the aging of the movement. Because Hamilton watches are a watch brand born in the United States, they need to be maintained in use.

Sometimes we forget to take care of our watch when we use it in our work and life after buying it, which is actually a wrong practice. Generally speaking, the service life of a watch is directly related to the number of times the watch is maintained, although there are some watches that are not maintained for 4-5 years without any problems. However, if the watch is not maintained for a long time, the internal parts of the movement will be seriously worn, and it will be more difficult to repair the watch when it fails.

So for some expensive watches that are often used, we need to maintain the watch every 2-3 years, which can slightly extend the service life of the watch.

Hope it can help you, thank you, dear.

Thank you! Uh-huh, thank you, dear.

Most watch lovers would normally advocate that their watch be returned to the service center for service every three years. But it depends on the situation, in addition to waterproof, it is also necessary to prevent collisions.

On a scale that can only be afforded, it is not harmful to have two or three watches swapped in daily life: wearing a mechanical watch during dynamic movement, such as improvising over time, can help extend the service life of the watch.

1. The watch that is worn every day, it can also be said that the watch does not leave the hand for 365 days, if you find that the error of the watch is very large, or the watch is water, it is best to send it for repair and maintenance; If everything is fine with your watch, it's best to have it serviced every three to five years; Some people's watches do not leave their hands, a wear is more than 10 years, this is not the way to wait for the watch, because of long-term use, the lubricating oil of the watch will still be lost or dried up, in the case of oil loss, it will accelerate the wear of the shaft; There are quartz particles in the air that we can't see with the naked eye, which will adhere to the oil, and if you don't maintain it for a long time, and let the watch keep going, it will only accelerate the wear and tear of the shaft; Some people wear it for 10 or 20 years, and the watch will go when they never want to maintain it, and when it fails, many parts have been seriously worn, and after maintenance, its accuracy will be greatly reduced, which is not as good as a new watch.

Second, if you don't wear it often, you can't wear it twice a month on average, and it is recommended that it should be repaired in 5 or 10 years.

1. The lack of kinetic energy of the watch causes the watch to slow down. The Blade needs to be wound regularly to ensure that the watch has enough kinetic energy to keep time.

2. The watch has been used for too long and has not been maintained, resulting in the accumulation of oil sludge and the watch slowing down. The watch should be serviced regularly according to the time of wear.

3. Although the automatic watch is shockproof, it is easy to break the pendulum shaft tip or wheel train when the external impact is strong, and it can also make the fast and slow needle vibration affect the time; The watch is greatly affected by the magnetic field, such as the TV, radio speaker, backpack or leather bag on the magnetic buckle, which may cause the hand silver to stare at the potato watch inaccurately.

1) The accuracy of the watch varies depending on the type of movement of the watch. Quartz watches are used to replace the balance wheel in mechanical watches with quartz oscillators, using its correct high-speed oscillations to time, generally speaking, the accuracy of quartz watches is higher, the Swiss standard is a monthly error of less than 15 seconds, and some accurate movements can reach an annual error of a few seconds.

2) Mechanical watches rely on internal mechanical devices to control the uniform and accurate timing of the watch, these mechanical devices will be affected by gravity, ambient temperature, etc. Some movements with higher precision, such as the Chronometer series, can reach around 10 seconds.

Insufficient power reserve: You need to check whether the power is sufficient, if the self-winding watch is small in motion, it may also cause insufficient power reserve, you can manually wind the power to replenish the power, and then observe whether it continues to be fast or slow.

There are three reasons for the formation of fog in the glass of the watch.

1) The air humidity inside the watch is high.

If there is fogging in the glass of the watch, only a small piece in the center, and then gradually disappearing after a while, it doesn't matter, because the air has relative humidity, and the same is true for the inside of the watch, fogging is the most common.

2) The temperature difference between the watch and the outside world is large.

When there is a large temperature difference between the inside and outside of the glass of the watch glass, and the water molecules in the air in the case move to the surface of the glass, fog will form in the watch glass, just like a layer of fog on the glasses.

3) The watch is flooded.

If the fog condenses into visible water droplets or the area is relatively large and has covered the entire watch glass, the watch will be flooded.

In particular, the watch has been exposed to water before, such as washing hands with the watch or being exposed to rain, and then the watch glass has fogged up, which means that the watch must have entered the water.

If water enters the case, you can use a granular substance called silicone to put the watch in an airtight container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and does not compromise the accuracy or longevity of the watch. The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

What should I do if my watch gets water? Send it to the watch shop to wipe the oil.

If the watch is flooded and there is water mist on the inner screen, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under a light bulb for about 30 minutes to eliminate the water mist inside; If there is only a slight ingress of water, wear the surface inwards and the bottom case outwards and put it on your wrist to eliminate the mist on the surface after a few hours.

If you find that the watch is flooded, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it about 15 cm near a 40-watt light bulb, and bake for about 40 minutes, and the water vapor in the watch can be eliminated. Do not bake the watch directly near the heat, so as not to deform the glass by heating. Because although there is no moisture on the dial, there may still be water in the movement, and the movement will rust and cause damage to the movement after a long time.

After the watch is flooded, it is recommended to find a professional repair outlet as soon as possible for the master to check and deal with it, which can reduce your unnecessary losses.

There is fog in the watch, which means that there is moisture in the watch. In general, although the watch is hermetically sealed, there are very small pores in the joints of the case, especially in used watches.

When washing hands or washing clothes or on rainy days, water can enter through these pores, especially the hot steam in the kitchen, which is more likely to soak into the case. In addition, the temperature is high and the humidity is high in summer, so if the watch is suddenly cold, the air containing more moisture in the watch will condense into mist or water droplets, which will stick to the watch glass.

If water enters the watch, please send it to the repair center immediately for treatment, otherwise it will cause many metal parts inside the movement to oxidize and rust due to water vapor, causing greater damage.

(1) When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is nickel-chromium alloy, the corrosion resistance is better, the semi-steel case is copper, long-term contact with sweat, easy to corrode, should often be wiped off with a soft cloth or pad plastic watch holder to prevent it from being eroded by sweat.

2) Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3) Do not put the watch in a closet with mothballs to avoid the deterioration of the watch oil.

4) Do not put the watch on the power amplifier, stereo, and TV to avoid magnetization.

5) Watches that are not worn for a long time should be wound regularly once a month, and watches with automatic movements should be gently swung back and forth for a few minutes or worn on the wrist for a period of time to make them automatically wind. The parts will not be in a stationary state for a long time to ensure the running performance of the watch machine.

1. The sweat of the watch strap is corrosive, and the sweat is corrosive if it is in long-term contact with the case strap, and the leather strap will smell if it is not cleaned in time.

2. The back cover of the watch cannot be opened at will to avoid the entry of dust and affect the normal operation of the watch movement; Road.

3. Do not put the watch into the appliance with the smell of oil camphor, the smell of camphor will cause the deterioration of the surface oil;

4. Do not place the watch near magnetic objects to avoid being magnetized;

5. The watch that has been placed for a long time should be wound regularly within the specified return time to ensure the normal operation of the watch;

6. When the watch is damp, the cotton should be pressed on the watch, and then baked with a 40-watt light bulb for 5 minutes to evaporate all the moisture in the watch;

7. The packaging box of the watch should not be discarded, it should be put away, and put it in the box when the watch is not worn to reduce the probability of damage to the watch;

8. Do not wear a luminous ceramic watch to sleep, as luminous materials are harmful to the human body.

If you have any questions, please call**, please feel free to answer.

Generally speaking, mechanical watches should be maintained at least once in 2 to 3 years, and during maintenance, all the watch movement parts should be disassembled, the movement parts should be wiped with gasoline, and then other equipment in the watch should be cleaned by professional equipment, and finally oiled and assembled. Cosmetics containing chemicals such as seawater, salt water baths, perfumes, shampoos, nail polish polishes, nail polish removers, etc., will corrode the gold plating and metal surface of the watch, so avoid contact with it. When cleaning the watch, it is also necessary to polish and polish the case of the watch.

Because the watch has very high requirements for technical parameters, cleaning the watch is a very delicate job. And after such a complex professional cleaning, old watches can generally be turned into new.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

Do not place the watch on the stereo or TV to prevent magnetization.

Do not leave the watch in a closet with mothballs to prevent the oil from deteriorating.

Never touch the watch with corrosive substances, especially acids, which can corrode the case.

It is not difficult to take care of your watch on a daily basis, as long as you can do these things on a regular basis, you can trust that your watch can always be kept in the best working condition. When it is worn on your wrist, it will definitely highlight your charm and temperament!

The solution to the water in the watch and the fog on the mirror:

Wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under the light bulb for about 30 minutes to eliminate the water mist inside, but do not put it close to the light bulb or bake it directly, so as not to cause the surface to be deformed by heating.

Wear the surface inwards and the bottom case outwards on your wrist to remove the mist from the surface after a few hours.

If you have silicone, you can put the silicone and the watch in water into a closed container, and after a few hours, take the watch out again, and the water mist in the watch will disappear.

If the water ingress of the watch is serious, it is best to send it to a watch shop to wipe the oil and eliminate the water in the watch to avoid rust on the parts of the watch.

Note: In order to prolong the service life of the watch, you should try to avoid fog and water droplets in the waterproof watch, do not wear the watch when washing your face, bathing, swimming and other "hydrophilic" activities, do not be affected by water vapor and hot vapor, and pay more attention not to be exposed to rain on rainy days.