Is it normal for Hamilton to wash your hands and get into the water?

How to deal with water ingress into the watch:

If you accidentally get water inside your case, you can use a granular substance called silicone to put it in a meter-closed container with the watch that has accumulated water, and after a few hours, you can remove your watch and the water will disappear. This method is simple, convenient, and economical, and does not compromise the accuracy or longevity of the watch. In addition, the silica gel that has absorbed water more than 100 times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used repeatedly and repeatedly.

Method 2: If the mechanical watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near a 40-watt light bulb, and bake for about 30 minutes, and the water vapor in the table can eliminate the problem. Do not bake the watch close to the fire, so as not to deform the watch by heat.

If there is water in the watch, you still have to go to the repair shop to wipe the oil and repair it to prevent the parts inside from rusting.

Chengdu Famous Watch Repair and After-sales Maintenance Center: Room 05, 24th Floor, SAC Sichuan Aviation Plaza, No. 6 Renmin East Road, Jinjiang District, Chengdu.

With the concept of quality assurance and integrity management, all employees have undergone professional training, excellent technology and rich experience, to better serve merchants and customers, we adhere to the tenet of "customer first, attentive service, integrity management", 24-hour service**: 028-62780618

The customer service center is equipped with professional letters, answering **, understanding customer needs and answering questions, and your satisfaction with our service will be our honor.

Hello, glad to answer for you.

Daily repair methods for water ingress in the watch:

1. Dry the granules with silica gel. If water enters the case, you can use a granular substance called silicone to put the watch in an airtight container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

2. Bake with a light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

3. Wear the watch backwards. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe. (It is not recommended to use the above methods to deal with it, it is recommended to go to the after-sales center for maintenance).

If the watch is flooded and there is water mist on the inner screen, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under a light bulb for about 30 minutes to eliminate the water mist inside; If there is only a slight ingress of water, wear the surface inwards and the bottom case outwards and put it on your wrist to eliminate the mist on the surface after a few hours.

Find after-sales service, Han's waterproof is indeed not good for quality control.

I saw that there was a problem 8 in the waterproof.

Hello, dear. The answer to your question (what is the quality of Hamilton watches) is as follows: Hello, the lowest Swiss watch in the watch class classification is also a class 3 watch, the four types of watch brands have been acquired Swiss watch brands, there are also low-priced Swiss brands launched for the Asian market, and Meki watches belong to the five categories of watches, Hamilton is an American-made watch belongs to the third class of watches, not bad, at least for now, there are very few fakes.

This watch is very high-end, you can buy it, because this watch is very good-looking, and it also has a high-end feeling when you wear it.

This kind of watch is still good, and it is also very worth buying, and the style is also very generous, especially suitable for adults to wear.

This brand of watches is actually still available, and there are many models that are particularly good-looking.

1. When wearing the watch to take a bath, the waterproof rubber ring used for waterproof in the watch will accelerate the aging due to the erosion of chemicals such as detergents, so the waterproof effect will be invalid.

2. In the rainy season, the humidity in the air is relatively high, and the temperature difference changes greatly, which can easily cause water vapor into the watch, and the same is true for saunas, air-conditioned rooms, and heating rooms.

3. The rubber ring in the watch gradually ages with the passage of time, and the waterproof performance gradually decreases, and the reduction of waterproof performance can easily promote the invasion of water vapor.

The solution to the water in the watch and the fog on the mirror:

Wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under the light bulb for about 30 minutes to eliminate the water mist inside, but do not put it close to the light bulb or bake it directly, so as not to cause the surface to be deformed by heating.

Wear the surface inwards and the bottom case outwards on your wrist to remove the mist from the surface after a few hours.

If you have silicone, you can put the silicone and the watch in water into a closed container, and after a few hours, take the watch out again, and the water mist in the watch will disappear.

If the water ingress of the watch is serious, it is best to send it to a watch shop to wipe the oil and eliminate the water in the watch to avoid rust on the parts of the watch.

Note: In order to prolong the service life of the watch, you should try to avoid fog and water droplets in the waterproof watch, do not wear the watch when washing your face, bathing, swimming and other "hydrophilic" activities, do not be affected by water vapor and hot vapor, and pay more attention not to be exposed to rain on rainy days.

(1) There is fogging in the watch glass, and there may be some times and sometimes not, especially when the temperature difference is large;

2) There are water droplets condensed in the watch glass;

3) A large number of water droplets can be seen on the glass and dial of the watch;

If you find that the watch is flooded, it is imperative to send the watch to the watch repair shop for drying as soon as possible, and if the water is serious, it is necessary to do oil washing. If you don't do it in time, then the water will make the steel parts in the watch movement embroidery, and the tiny clock parts usually need to be replaced once they rust, and the repair cost in the future will be very large, you must know that the damage to the watch by water is "catastrophic". In addition to the movement parts, long-term contact with water vapor will also cause discoloration, blistering and rust of the watch dial and watch hands.

Here, I would like to remind you that if it is a watch with repeated water ingress, you need to pay extra attention when wearing it.

Water in the watch is a more serious thing, especially some high-end mechanical watches, if not repaired in time, then the water will make the steel parts in the watch movement appear embroidery, tiny clock parts usually need to be replaced once rusty, the future repair cost will be very large, to know that the damage to the watch is "catastrophic". In addition to movement parts, long-term exposure to moisture can also cause discoloration, blistering and rust on the dial and hands of the watch.

Watch water ingress:

The first method: bake with an incandescent lamp Wrap the watch with water and wrap it in several layers of paper towels, then place it at 15 cm of a 40-watt incandescent lamp, bake for 5 minutes, and the water vapor in the watch can be evaporated. Remember not to bake for too long, and for watches with leather straps, the strap should be removed first.

The second method: put it together with the desiccant.

The water absorption effect of desiccant is much better than that of rice, put the watch and desiccant together, wrap it in plastic wrap, wait for 24 hours, and it will not cause dust pollution.

The third method: put it in rice.

Rice has a good water absorption effect, and every family has rice, and it is easy to use. After 24 hours of placing the watch in the rice, most of the water is absorbed. Finally, take out the watch and gently wipe off the rice dust.

The fourth method: reverse the watch.

In order not to disassemble the watch, you can wear the watch upside down, wear the watch glass on your arm, and discharge the water vapor in the watch little by little.

It is advisable to take it to the watchmaker quickly to wash the oil, so that the dial does not corrode and the movement rusts after a long time, so that it will be too late.

If it's just a small amount of mist, it will go away on its own over time, or you can bake it under a light bulb, but don't bake it over the fire. Or you can put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the water vapor can be eliminated after two hours. If there is a lot of water and water droplets can be seen, you should find a professional repair office for maintenance as soon as possible.

Although the waterproof watch has been treated with a certain amount of waterproofing, it is generally not strictly inspected, so it is recommended to avoid water contact when wearing it to prevent accidents. Watches are high-precision items, so please take care of them.

The maintenance center is located at: [Room 05, 24th Floor, SAC Sichuan Aviation Plaza, No. 6 Renmin East Road, Jinjiang District, Chengdu, Tel: 028-62780618].

Hello, glad to answer for you.

Generally speaking, there are only three places where water can enter the watch movement: the handle (handle), the watch mask and the back cover. The waterproof device is also installed in these three places: add a rubber ring to the shank, add a rubber ring on the threaded edge of the back cover of the sealing ring, shank and other parts, and make the surface tight.

Water and fog into the watch has the greatest impact on the watch movement, and it should be dealt with in time to prolong the service life of the watch. If not treated in time, the residual moisture will easily cause the internal movement to oxidize and rust, resulting in inaccurate watch timekeeping and watch failure.

If the watch is seriously flooded, please send it to the repair center immediately for treatment, otherwise it will cause many metal parts inside the movement to oxidize and rust due to water vapor, causing greater damage.

1. If the watch is soaked in water, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes, and the water vapor in the watch can be eliminated.

2. Put it in a rice jar and bury it deep in the dried rice for a period of time, if it is fast, you can see obvious results in one night.

3. You can use a granular substance called silica gel to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear.

4. Take a hair dryer to dry, and then apply a layer of transparent nail polish on it to avoid impurities and prevent rust.

5. If there is water vapor in the watch, you can wear the watch face inward and the bottom shell outward, and wear it on the wrist to eliminate the water vapor in two hours. If there is too much water in the watch, the case must be opened and scrubbed. If you are not sure to deal with it yourself, you should send it for repair in time.

The reason why the watch is waterproof is mainly to rely on the waterproof rubber ring in the watch to form a sealed and waterproof one. However, if the back cover of the watch is removed frequently, the waterproof of the watch will be affected to a certain extent. According to personal experience, it is recommended that the wearer will do a waterproof performance test of the watch once in 1 to 2 years, in case the watch waterproof rubber ring is found to be aging and delay the watch maintenance.

After the warranty period, it will be sent to a professional repair center for comprehensive maintenance and repair as soon as possible. Don't listen to online home remedies, your watch must be fully serviced if it is wet. Hopeful!