Lee Locke walks accurately when he wears it, and walks fast without it

In order to help netizens solve the problem of "the watch is not accurate, and the error of wearing it is too large." 24 hours when not worn", China Learning Network through the Internet on the "watch is not accurate, wearing the error is too large." 24 hours when not worn" related solutions have been collated, and the detailed problems of users include:

rt, I want to know: the watch is not accurate, and the error is too big when worn. When you don't wear it, it's about 10 seconds for 24 hours, and when you wear it, it's about 8 minutes faster for 10 hours!

To be sure no, the specific solution is as follows:

Solution 1:

00 yuan of the table, 500 on the top. If you want to have a good movement on time, more than 2000, there is no maintenance value. If you want to be right, buy a good quartz watch.

Solution 2:

I've been planning to buy a decent one, but I don't know much about the watch and I'm afraid of regretting it, so I'll get a bargain and study it first. If you have a budget of 3,000 yuan, can you buy Tissot? If not, what about Rossini's quality? I don't like the island country very much

Solution 3:

You can buy Tissot for 3000, forget about Rossini, if you really want to make it domestic, buy a seagull, it's okay. It is recommended to buy Tissot, Le Locle series or gallery.

Solution 4:

Awesome, you solved my problem perfectly, thank you very much!

Solution 5:

How can there be a 300 yuan Longines watch, there is no repair value. Now the labor cost of repairing mechanical watches is at least 100 yuan.

Solution 6:

Maybe it's a fake, or don't fix it, and throw it away when it's broken.

Mechanical watches have a power reserve and generally go when worn.

Hurry up, put your head down and go a little slower. There is no need to worry, unless it is becoming more and more inaccurate over time, which may be due to magnetism affecting the stability of the movement. But it's usually fine.

Mechanical watches are not completely accurate, and it is normal for the daily error to be between 5 and 15 seconds. Especially for the watch you just bought, the error will be unstable, and you need to wear it for a period of time and then observe.

Tissot watches were ok. As long as the error is not too large, it is normal within 15 seconds. After wearing it for a long time, you will gradually get used to this error.

There are three main reasons why mechanical watches are inaccurate.

1.Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as watch balance spring failures, escapement failures, and component slips can cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, which is more related to the failure of the circuit board, or the poor contact of a certain part.

For the handling of mechanical watches, demagnetization is the first priority, and it must be neat and thorough demagnetization; Then check the position error of the watch, continue to check the hairspring, clean the hairspring with alcohol, it will be more fuel and tidy, volatile is good, and the low-quality fuel and magnetic field will make the hairspring show up to circle or attract each other. It is best to do a timekeeping quiz on the repaired watch, and it is best to do a long-term dynamic check to see which all-round rotating experimental rack is to be put on, or to wear it directly to check carefully. If it is a deeply hidden problem, we can only detect it with the help of relevant instruments.

Hello, glad to answer for you!

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.

My quick....It's normal...

Mechanical watches just have errors....

And your normal, as long as the error is not too large, it is within the normal range, and a little error is inevitable.

Reasons for the slowness of mechanical watches:

1. The watch is magnetized, and the watch needs to be demagnetized.

2. Insufficient power: mechanical watches are divided into two types: manual winding and automatic winding. Lack of power is often an important reason for the watch to slow down or even stop.

3. Mechanical failure caused by insufficient maintenance: loose internal parts lead to inaccurate timing of the watch. Dust, foreign matter, so that the gear teeth are stuck with each other, and some watches are oiled too much or too little, which will make the watch go wrong.

The after-sales center of Tissot watches is in: Room 808, Block E1, Office Building, Oriental Plaza, No. 1 East Chang'an Street, Dongcheng District, Beijing, when your watch fails, you should go to the regular after-sales center, and the professional technician will conduct a comprehensive maintenance and inspection of the watch, and all the accessories in the after-sales center are original to ensure that the service life of your watch is extended!

The reason why the mechanical watch stops is that if it stops under the premise that it has not been bumped, it is usually due to a lack of power, you can fill the mainspring every morning to see if there is still such a stoppage. If this is still the case, it is recommended that you go to a professional repair shop and let the master check it. In addition, the mechanical watch should be fully maintained in 3-5 years, and the oil should be washed and lubricated to ensure that the internal parts of the movement can operate normally.

This watch is a fully automatic mechanical watch, usually when you don't wear it to put it away, it is best to put it in the shaker, if you don't wear it for a long time, you have to wind it once a month to let it go for a few hours.

There should be a problem with the watch, you can take it to the Tissot special repair center to let the master test what the problem is.

If it is just a single manual winding without going is normal, this is because after stopping, all the gears stop running, after the winding hairspring is tightened, you need to turn the swing rudder to drive the gear to run, which is a normal phenomenon. The same is true for the AP I wear myself, you mainly have to see if he stops secretly, whether he does not go in the full chord state, and whether it is accurate when walking, if the above is no problem, don't care, if there is a problem, it may be that the oil sludge is dry, or the gear is damaged, or even magnetized, at this time it needs to be repaired, and the normal mechanical watch needs to be maintained for three to five years.

Wash the oil and take care of it, and it will be stable. Nothing is a big deal.

When the watch is received, it is manually wound for about 20 turns, and then worn normally, the automatic mechanical watch needs to be worn for 8 hours a day and the wrist needs to have an activity to maintain the operation of the watch, the mechanical watch is allowed to have errors, as long as the correct wearing of the general force lock's time error is about 5 seconds, the international standard stipulates that the time error of ordinary mechanical watches for 24 hours is plus or minus 30 seconds, with 24 hours as a cycle, can not be accumulated, and the error of the watch can be observed every day is not in this range.

Our mechanical watches often appear to be inaccurate when stopping and waiting

Most DAO people wonder if the mechanical watch is broken. There are many reasons for the theft of mechanical watches, mainly the following main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

Tissot Le Locle has been with me for four years, and today I found that it was gone, and you may need to maintain the tea oil, so you can go to a professional repair watch shop for maintenance.

Once you receive your watch, you first need to wind it up (rotate the handlebar 25 times clockwise) and then the rotor will replenish the mainspring as long as you wear it for enough time each day, so that the watch can run properly. Generally, a fully automatic watch should be worn on the hand for more than 8 hours a day to replenish the energy of the clockwork, but it is not absolute. It is recommended to wear a watch on holidays, and only when you wear it on your hand to continuously replenish the energy of the clockwork, the watch will not stop.

Nowadays, there are people who work in the office, and the watch often stops and goes, in addition to the movement, because the wearer itself has insufficient exercise to replenish enough energy to the mainspring. You wind it first to observe, if it still stops after winding, it is a movement problem, so long you need to take it to a professional maintenance point for repair.

The reasons for the watch to stop are as follows:

Kinetic energy is insufficient, and automatic watches use the movement of the arm to complete the winding. If the watch is left for too long or the amount of arm movement is less every day, the mainspring energy of the watch will be due to insufficient winding, and it is easy to produce inaccurate timing or night stopping.

The hairspring is faulty, and the clockwork will be tighter if the amount of exercise is large. If there is a problem with the upper bar mechanism that causes insufficient power, it generally appears between 9 o'clock and 12 o'clock in the evening, "with a calendar function table" because at this time the hour wheel begins to drive the calendar wheel, and the load is large, if the power is insufficient, it is easy to stop during this time period. This time should not be reversed dial pin, now many mechanical watches use plastic parts of the calendar wheel, accidentally will break the gear, once the tooth is broken, every day at this time will be stuck, or to a fixed date will no longer jump.

As a result, the mechanical watch was stopped.

Bump failure, the watch is a precision instrument, once the bump receives a violent vibration, then the parts may fall off or damaged, you can make the watch steal stop.

In fact, there are many reasons why mechanical watches do not go, such as: bumps, movement gear misalignment, magnetization of the watch, shelving for a long time, sludge drying, etc., generally divided into two kinds, the first is because of insufficient kinetic energy. The second is due to a malfunction of the mechanical watch.

Therefore, don't panic too much when you find that the mechanical watch is not leaving, and first distinguish which kind of big one it belongs to.

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the store for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy.

3. Having been beaten or impacted. The watch is very tight, if it is hit or dropped, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to the store for testing.

4. Maintenance is required. A lack of oil or wear and tear of the internal parts of the movement can cause time-keeping problems and require maintenance.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the error of the time, which will be sent to the store.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.

Take the warranty card to the counter, the mechanical watch can not avoid going fast or slow, mine before is a month fast three minutes or so, yours is more serious.

You can take it to the counter, you must bring the insurance card! It's possible that it's magnetized.