Why is the middle point of the sleeve two points in the middle when the clothing is played?

Clothing pattern making alone is better than reading some practical books, **on the surface is the most direct, but many details of the painting will be misleading if not given timely guidance, but if you want to meet the employment requirements of the enterprise, it is not possible to see ** or read books.

As for what you said about partial two points is not what sleeve type is two points, it depends on the specific style requirements, which is related to the human arm, the human arm is not completely straight, there is a certain curvature, when learning clothing patterning, we must pay attention to not rote memorization, and it is combined with the actual situation, clothing patterning is based on the characteristics of people's body type.

In the actual study, as an auxiliary study, if you read a book, you will learn as a basic accumulation and the core of fashion design (clothing structure design, also commonly known as clothing pattern making or clothing patterning). Mr. Gao Hong's "Clothing Structure Design and Its Application" basic introductory reference book, practical-based, 139 yuan. If this book can be digested, then the "Garment Factory Pattern Encyclopedia" can be a better consolidation.

It's also 139 yuan. It's important to be practical, not those theory books that are cobbled together for dozens of dollars. It will be of practical help to your future formal studies and future work.

You can learn more about these two books in the encyclopedia.

This has something to do with the front and back sleeves.

in the printer's.

To the properties of the BAI page in the Printing Preferences section of the DU selection box will be printed by the type.

Normal size DAO printing is changed to page layout printing You can print the contents of two pages to a piece of paper, you can also set the content of the page to print on a piece of paper, and other formats can also be printed in addition to PDF format, such as doc, xls, jpg, txt, etc. The above is an example of Canon's IP series inkjet printers used on WinXP systems, and Epson HP printers have similar settings.

It is generally caused by the drying out of the lubricating oil on the shaft where the print head is located.

The maintenance method is as follows:

1. Check whether the car and guide rail are dirty (whether the surface of the car is very dirty, whether the axle sleeves on both sides of the car are silted with sludge, etc.), if so, clean the car and the guide rail. Shijiazhuang computer repair.

2. If there is no dirt, please check whether the position of the word car belt is correct, if not, adjust the word car belt.

3. If the position of the word car belt is correct, please print**, check whether the vertical line is aligned, if the vertical line is regularly misaligned, you can press and hold the pause button on the printer panel to turn on, the printer will print out the operation instructions and a set of vertical lines (wide printers choose wide row printing paper), and then select a group of the straightest vertical lines**, enter the vertical line of another font until the vertical line of the three fonts is adjusted, and exit after shutting down.

4. If the vertical wire is neat, please check whether the left boundary sensor is normal, if not, repair or replace the sensor.

This should be set in the printer to set the paper specifications, and then the printer settings in the hand-selected, in the software also to select, the following is a specific introduction:

1. In the page settings of your excel file, which kind of paper is selected for the paper specification, and the letter paper should be selected for the page paper.

Then, in the properties of the printer, also set the paper specification to letter paper, and then try to print continuously;

2. Set the printing preference paper, click Advanced in the printer properties, select the customized paper in the paper specification column in the options, and click OK, the default paper of the general software is A4 paper, you need to select the corresponding paper specification in the software or document currently in use.

First of all, look at the paper settings correctly, and set the paper of the printed page to the actual paper size and size. The paper specification should be selected as letter paper, and in the properties of the printer, the paper specification should also be set to letter paper, and then try to print continuously. Hope it helps.

It is recommended to try to type it with A4 or other paper before printing the formal paper, so that you may know the problem in advance and it will not cause trouble.

You take a look at the page setup of your excel file, which paper type of paper is selected for the paper specification.

For multi-paged paper, letter paper should be selected.

Then, in the properties of the printer, also set the paper specification to letter paper, and then try to print continuously;

The paper settings are incorrect, so you need to set the paper of the printed page to the actual paper size so that there will be no deviation.

Hold down the shift key and hit another yarn direction. This is called the secondary yarn direction.

129 can play level 4 up life and death.

Stone Attributes: Root Bone +13, React +6, Light Resistance +6, 35% chance to cause targets within range to take 60 fire damage per second when dying, and 35% chance to cause 1925 wind damage to targets when they die when they are in fire for 8 seconds.

Stone Spirit Attribute: Physical Defense +550

Magic Defense +550

Max HP +3400

Max Mana +1200

Poison Resist +15

The 129 ghost clothes need 5 holes to Guan Ning points, the first three holes need 57600 points, the fourth hole needs 86400 points, and the fifth hole needs 129600 points. A total of 388,800 points are required.

Simply use Guan Ning points to punch the hole to what year and month you want to play, it is recommended to cooperate with the dart.

Guan Ning + Dart Points: The first three holes need 23040 Guan Ning Points + 11060 Dart Prestige respectively. The 4th hole requires 34560 Guan Ning points + 16589 dart reputation. The fifth hole requires 51,840 Guan Ning points + 24,884 dart prestige.

That is, a total of 155,520 Guan Ning points + 74,653 dart reputation are required.

It's faster and easier to punch, but it takes money to bet on darts, and you can ask someone to teach you to take you. Hope.

That's a sinkhole.,I'm 89 ghost.,The first 3 holes are 24,000.,The fourth hole is 36,000.,I don't know the fifth hole.,But you can ask a Chinese elf.。

The fifth hole in the purple suit costs 16w points, and the sixth hole costs 24w points!

Shoot in 2 segments, put the 2 segments small after filming, and edit them together, this term is called editing, nothing special, as long as it is film software, it can be done.

There is software, "VideoStudio" will do.

Multi-screen transitions, PR can do it yourself.

I guess it's computer editing.

In this case, the size of the printer driver should not be set correctly, the control panel --- the device and the printer --- find the driver, right-click and select "Printer Preferences" to set the width and height of the express order, and try again.

(It's an old question, but there should still be a need for this answer.)

After checking that the settings are OK, please check the bead of the print head near the paper outlet as soon as possible to see if it is stained with glue. In the process of continuous printing, the self-adhesive part of the thermal printing paper is easy to contaminate the beading. If the bead is glued, the paper head will stick to each time the paper is discharged, and the print position will be moved downward.

Solution: Find a bottle of wind oil essence, dip it in wind oil essence with a paper towel, and wipe the pressure strip clean. And then all was fine

The electronic face sheet is printed out and the free point deviation is adjusted.

1. The printer printhead is burned and replaced with a new printhead;

2. If the printer printhead is seriously blocked, continue to clean or replace the printhead;

3. There is air inside the continuous supply, which makes it impossible to print and replace the continuous supply;

4. The main control board of the printer is burned and replaced.

Count 3 times. The dynamic score is the average value of the store's score in the past 6 months, if there is no dynamic score in the past 6 months, there is no dynamic score; After consumers give dynamic scores, it is recommended to pay attention to 1-2 working days, and system delays may occur.

For example, in each calendar month, for transactions between the same buyer and seller, the seller's store score will only be counted for the first three times (the calculation time is subject to the transaction success time). Once the store rating has been made, it cannot be modified.

Calculation example: a total of 20 buyers participate in the rating, each buyer only participates once, (19 people give 5 points, 1 person gives 1 point), the dynamic average score: (19 people * 5 points) + (1 person * 1 point) = 96 points divided by the total number of points (20 times) = average score.

It depends on the situation.

If a customer adds two different products to their cart and then checks out and pays for them together, they can only be graded once.

If the buyer took the auction separately and then paid separately, it will be graded twice.

In addition, the same customer can only give the same seller a maximum of 3 dynamic ratings per month. If you give too much, the system will not be scored.

And once it's scored, no one can modify it, and sellers can't see who rated it.

The dynamic score is generally displayed half an hour after the mutual evaluation of the two parties.

There are two scenarios for this! One is that you shoot the two separately, and if that's the case, you can score it twice. One is to buy it with the shopping cart at the same time, and you can only rate it once!! Dynamic scoring: Only the first three scores of the same buyer are valid!!

Buying something on **, a store buys a lot at one time, and the system will set up reviews and ratings for each item when it is evaluated, so the dynamic rating when evaluating is only the corresponding product of the evaluation, and does not represent other goods purchased.

Count twice, and count twice for different goods.

There are only 6 times a month.

The cart is divided into 2 times at a time.

In your purchased treasures, you see.

1. Divide the front piece according to the broken seam edge and retain the original drawing.

2. Left-click the paper shape to cut and copy the function.

3. Left-click to select all the elements that have been cut, turn them red, and right-click to end.

4. Left-click to cut the element, it will turn green, and right-click to end.

5. Left-click on the moving side and drag the mouse to the specified position.

6. At this time, hold down the CTRL key, release the left button first, and then release the CTR paper shape, and the paper shape is cut and copied.

It is copied to another paragraph with a double document copy, and it is copied to another place with a document transfer.