Mine is Redmi 2 and I keep getting stuck on the mi boot interface 5 after factory reset

What are you doing with Sanqing? The next ROM on the official website, swipe the card.

This is to help the questioner! It's also a time to do Lei Feng, so that their friends have a reference for this kind of problem Originally, my mobile phone was like this, but I got it Okay, I could have stopped playing games, but I want to be Lei Feng back, run to tell me!

I'll revisit this issue first, and you'll see if that's the case.

After resetting the phone to factory settings, it will always be stuck on the MI page after restarting the phone, and it can only be turned on by pressing and holding the power off button for a few seconds or depressing the battery.

The mobile phone comes with an upgrade system updater, and after the update, it is also stuck on the MI page.

I've used the official card brush and line brush are unsuccessful (the reason for the unsuccess is basically stuck on the mi page after restarting).

In the above situation, please don't think about it yourself! Take the mobile phone directly to Xiaomi's designated after-sales outlets to queue up and call the number (you can also call the number) to find the staff to explain the situation, they will first give you a flash, but under normal circumstances, they will not give you a good brush, after about half an hour will tell you that the motherboard is broken, if your mobile phone is free to replace the motherboard within the warranty time, their after-sales outlets have [remember] as long as it is free to replace within the warranty time (one year from the factory), don't give money.

Summary] This situation is a defect in the motherboard of a certain batch of Redmi's products, and you can replace the motherboard directly. No invoice, because the mobile phone presses the code of * after it comes out, they can find out the factory time, and if it is an online sale, they can even check the time of receipt. After replacing the motherboard, they will brush the system for you by the way!

When the time comes, you can use the update system on your phone, you can restore factory settings, and you won't be stuck in the mi state anymore [but] when updating the system, you must wait for the phone to automatically update and restart, don't press any key of the phone during the period, you just need to keep the phone screen lit!

If you don't have an insurance, hurry up and find after-sales **] [Landlord, I will help you, thank you! 】

1.It is recommended that you connect the original charger, pay attention to the status of the mobile phone, if the mobile phone is seriously heated or cannot enter the system for a long time, please unplug the adapter in time and go to the after-sales service for testing.

2.If your phone keeps getting stuck in the interface, you can try to press and hold the power button for 10s to force restart.

3.If it still can't turn on normally, you can try to press and hold the power button + volume up button to enter REC mode, select Clear Data and try to turn on again. Or go to after-sales disposal.

1. If the phone has been stuck in the "logo" interface after booting up, you can try to shut down again before restarting to see if it can enter the system interface normally after rebooting.

2. There is also a mobile phone when the phone is turned on can not enter the mobile phone system interface, at this time check whether the mobile phone shows the progress bar, if there is a progress bar, it is caused by the mobile phone system update, regardless of it waited a few minutes, when the system update progress is completed, it will automatically enter the mobile phone system.

3. If it is not for the above reasons, the boot interface is displayed all the time, then the phone may be dead, and you only need to force restart the phone to solve it.

4. If it still doesn't work, and there is no response on the boot interface for several minutes, then please try to charge it with a mobile phone cable or connect the mobile phone to the computer to see if it is normal.

5. After operating through the above methods, it is still displayed on the boot interface, then you can only wait for the phone to run out of power, and then recharge and restart to see if the problem is solved.

6. In addition, if the above operations are not effective, then you can only contact the after-sales maintenance inspection to see if the problem is the problem of internal hardware.

Extended Information: Common troubleshooting of mobile phones:

Symptom: The phone automatically restarts and crashes indefinitely.

First, the cause of the failure:

1. The installed phone case does not match the mobile phone or is not installed properly, resulting in the power button being stuck or squeezed, triggering the automatic restart mechanism of the mobile phone by pressing and holding the power button.

2. If the temperature is too low or too high, the low temperature or high temperature protection function of the mobile phone will be triggered, resulting in automatic restart.

3. It may be caused by too many files stored on the mobile phone, resulting in the automatic restart of the mobile phone due to excessive load.

4. It may be that the file system in the SD card is abnormal, and the phone automatically restarts for no reason.

Second, the solution:

1) If the phone is normal after removing the protective case, it is recommended to replace it with the official standard protective case.

2) It is recommended to keep the phone in the ideal temperature (0 to 35) as much as possible, which can avoid this problem and effectively improve the battery life.

3) The cache file will be automatically cleared after the phone is restarted, please use it normally after the phone is restarted. We recommend that you clean up background apps in a timely manner.

4) If the mobile phone uses an SD card, it is recommended to take out the inner SD card after powering it off and try again.

5) Check whether the "Timed Power On" and "Timed Power Off" switches are turned off.

If none of the above methods can solve the problem, please back up your data in advance and bring the purchase voucher to the nearby customer service center for maintenance.

It may be that the system crashes due to the root of the phone, the third-party software is incompatible, or the hardware of the phone is damaged, etc. The specific solutions are as follows: First:

You can double clear by entering recovery mode. 1.In the power-off state, press and hold the power button and volume + buttons of the phone at the same time.

2.Release the keys when the screen lights up and wait for the recovery mode to enter. 3.

Use the Volume+ and Volume—keys to adjust the bright bar to "Wipe Data Factory Reset", i.e. "Clear Data Restore Factory Settings", and press the Power button to confirm. 4.Use the Volume+ and Volume—keys to adjust the light bar to "yes, delete all user data" and press the power button to confirm.

5.Wait for a while until the screen appears, select "Reboot System Now" to restart your phone, and press the power button to confirm. 6.

Wait for your phone to reboot into the system. Second: access to fastboot.

How to enter fastboot: In the shutdown state, first press and hold the "home button", then press and hold the "volume down button" and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter fastboot. Connect your phone to the computer and flash a complete system package.

Please find a professional to flash the phone) Third: If this is still the case, you can enter the after-sales process to detect the failure of the mobile phone.

Redmi has been stuck on the Redmi interface since booting, in this case there is an error in the system files of the phone, and the solution is to flash the phone.

This situation is common caused by the destruction of the mobile phone system, and the following is a general solution:

Deduct your phone's battery and press the volume up and on buttons at the same time. If you have the idea of changing the phone, you can put the old mobile phone on a certain turn**, there are professional quality inspectors to provide door-to-door service, and the replacement is easy and stress-free!

Lasts 6s to enter recovery, and then select Chinese Simplified.

Next, select Clear Data, then you will know all the data, and try to turn on the phone again.

This interface has been displayed after the Redmi phone is turned on, indicating that there is a problem with the phone, there is a bug in the system, it is recommended to turn off the phone and restart, if the problem cannot be solved, then it is necessary to flash the phone to solve it.

This is all due to the loss of important files in the mobile phone system, and it must be when you clean up your phone, some important files of your mobile phone are deleted, which will lead to this result.

Redmi has been stuck in the Xiaomi Redmi interface since it was turned on, what's going on?

Answer: If there is a problem with the mobile phone system, you need to contact the after-sales service, and do not deal with it yourself.

Redmi phone, if this happens, you can try to double clear the phone, and choose to restore factory settings when double clearing, see if it can be solved.

It should be that after flashing, there was a problem with the system. It is recommended to go back to the original version of the system.

Redmi has been stuck in the Xiaomi Redmi interface since it was turned on, what's going on?

Redmi has been stuck in the Xiaomi Redmi interface since it was turned on, what's going on? Hello dear, I'm glad to answer 1, there is a problem with the boot button. 2. The phone freezes and freezes.

3. The system crashes. 4. Hardware failure. Workaround:

1. If the Xiaomi phone can't be turned on, you can press and hold the power button and the volume + button at the same time to force restart the phone, and it can return to normal after restarting. 2. If it still stays on the boot screen after restarting, you can try to restore the phone to factory settings. Pull out the phone battery to power off and turn it off, then install the battery, press and hold the volume + and power keys at the same time to enter recovery mode, and then select Chinese Simplified - Clear Data - Clear all data, and then restart the phone to return to normal. 3. If you still can't enter the system after restarting after clearing all data, you can connect to the computer to flash the phone, and flash the new system for the mobile phone to solve the problem; The specific flashing tutorial and flashing package can be obtained by visiting the official Xiaomi forum.

4. In addition, problems with the hardware of the mobile phone will also lead to staying in the boot interface and not being able to enter the system, such as motherboard chip failure, processor, memory failure, etc., this situation needs to contact Xiaomi's after-sales service for maintenance to solve.

Redmi has been stuck in the Xiaomi Redmi interface since it was turned on, what's going on?

1.It may be that the phone is dead, you can pull out the battery, turn it off, and then reinstall the battery to turn it on. 2.

It may also be that the system has crashed, you can turn off the phone, then press and hold the power key and the volume + key to enter the recovery mode of the phone, and then select Chinese Simplified - Clear Data - Clear all data, and then turn on the phone to return to normal. 3.If it still can't turn on, you can connect your phone to the computer and use the flashing tool Miflash software to flash the complete system package for your phone.

4.If none of the above methods can solve the problem, it may be that the hardware is damaged.