What are the factors that are included in the selection of slide modules?

The selection of slide module can be considered according to the following important parameters.

1) Load, that is, how much weight the module needs to load the object.

2) Running speed requirements.

3) Motion accuracy requirements. Motion accuracy refers to the repetition accuracy, that is, the interval between the module and the origin when it returns to the end after reciprocating 30 times.

4) Valid travel requirements. That is, how long the interval from one end to the other end needs to be in mm.

Correspondingly, in the selection, the detailed parameter requirements of the slide table module should be determined with reference to the above requirements

1) In practical use, objects with multiple demand loads are required to be measured in practice. When the load component is greater than 15kg, it is recommended to use a linear module driven by a ball screw.

2) The effective stroke requirement is about 50mm more than that of the practice, so as to reserve the space for expansion.

3) Slide table modules with different uses have different requirements for motion accuracy, and the above are provided by professional slide table module manufacturers.

The accuracy of position repetition (according to the choice of screw drive or belt drive, the screw has high precision, the first is more expensive, the belt drive speed is fast, and the running accuracy is lower).

2.Stroke (choose to use the screw rod to drive or the belt, the stroke is too long, the length of the screw rod can not meet the requirements) 3Speed (see the speed of the motor).

4.Internal configuration (brand and processing technology of key components).

5.Motor brand (motor speed, power, brand).

6.The load weight is small (note that the linear module is the installation method, the load, the force distance of the allowable load) 7Use the environment (choose closed or open).

The effective stroke of the slide module.

The repeatability of the slide.

The lead of the screw rod is related to the speed Speed calculation formula: motor speed * lead 60s load size (to be clear about the installation method of the module, the horizontal and vertical loads are different, and the vertical load usually has higher requirements for the load).

The use environment (whether it is a harsh environment such as high temperature, humidity, dust, etc., and take corresponding protection and maintenance measures) <>

Straightness, positioning accuracy, assembly clearance.

The linear module is divided into two kinds of screw and synchronous belt, and then according to your requirements, accuracy, stroke, load. If you don't know much about the running speed, find someone who understands, if you don't know someone around you, ask a few more customer service, and they will provide a model that suits you according to your requirements.

1. Repeat positioning accuracy of Kenic slide table module: the repeated positioning accuracy of the screw rod, the imported grinding accuracy is relatively high, and secondly, the domestic manufacturers who use imported accessories should pay attention to the fact that some manufacturers who use imitations of imported accessories are difficult to control the accuracy, and the noise and other properties are also poor; Belt Module05 Repeatability range;

2.Stroke: The stroke of the screw rod is limited, the limit stroke = lead * 60mm, and the stroke of the belt can be several times that of the screw rod, but the longer the stroke, the greater the error;

3.Speed: The running speed is related to the lead and the selection of the motor, and the speed relationship v = lead * rated motor speed 60

4.Motor brand (motor speed, power, brand).

5.The load of the slide module is small (note that the linear module is the installation method, the force distance of the load and the allowable load).

6.The environment in which the slide module is used (choose closed or open).

There are many factors that determine the slide**, and there are three main determining factors.

1. The configuration of the linear module: different configurations are different, and a good configuration determines the quality and life of the product;

2. Linear module assembly process: including the manufacturer's processing equipment, which determines the stability and accuracy of the product;

3. The brand of linear module and the service of the manufacturer.

The above factors control the linear module of automation equipment parts, especially the demand for precision linear module.

The accuracy of position repetition (according to the choice of screw drive or belt drive, the screw rod has a high degree of precision and verticality, which is more expensive, the belt transmission speed is fast, and the running accuracy is lower).

2.Stroke (choose to use the screw rod to drive or the belt, the stroke is too long, the length of the screw rod can not meet the requirements) 3Speed (see the speed of the motor).

4.Internal configuration (brand and processing technology of key components).

Residual state shelter 5Motor brand (motor speed, power, brand) 6The load weight is small (note that the linear module is installed and installed, and the force distance of the load and the allowable negative closed and missing load) 7Use the environment (choose closed or open).

According to kinetic energy: electric slide, pneumatic slide according to the transmission mode: ball screw slide, synchronous belt slide, rack slide.

The selection of slide table can be based on the following points: Kenic slide table manufacturer

1.The stroke of the slide table (choose the screw or the belt, the stroke is too long, and the length of the screw rod does not meet the requirements).

2.The position of the slide table is required for repeated positioning accuracy (according to the choice of screw drive or belt drive, the screw rod accuracy is high, the first is more expensive, the belt transmission speed is fast, and the running accuracy is lower).

3.The operating speed of the slide table (the speed calculation of the motor) Acceleration requires engineering coordination.

4.The internal configuration of the slide table (the brand and processing technology of the key cavity guarding components).

5.The configuration of the slide table is the motor reducer brand (motor speed, power, brand).

6.The load of the slide table is small (pay attention to the installation method, load, and force distance of the allowable load of the linear filial piety module).

7.Environmental requirements for slide tables (choose fully enclosed Wuhu module or semi-enclosed module).

8.The load of the slide table, i.e. how much weight the module needs to load.

Correspondingly, in the selection, the detailed parameter requirements of the slide table module should be determined with reference to the above requirements

1) When the Kenic slide table is used in practice, the object with multiple load needs to be measured in practice. When the load component is greater than 15kg, it is recommended to use a linear module driven by ball screw.

2) The practical selection of the Kenic slide table requires about 50mm more effective stroke than the practical one, and the space for expansion is reserved.

3) The accuracy of the Kenic screw slide table is higher than that of the belt slide table, and the screw is more durable.