How to change the IP address of the network, the other party s software prohibits my IP login, how d

The following describes how to modify a network IP address:

Purchase login. <>

Select the IP node you need.

The connection is successful.

This can be modified by installing an IP converter, which is simple and easy to use.

2.Install the tool on your phone computer.

3.Select the IP address after opening the tool.

Support one-click connection to multiple windows with different IPs, single window single IP4Click Start Connect to complete the steps to modify the IP address.

This is achievable.

It just needs one that can be replacedRabbit IPThe software is fine.

Find the right one yourself.

Kyushu, dynamic, IP software, which can be automatically switched and manually switched, is very convenient, and can also adjust dynamic lines and static lines, which feels that this software is very practical.

It's very affordable, you can also try it for free, the number of IPs is large, and the network speed is also good. Personally, it feels good.

This is achievable.

You just need a software that can change the IP.

You can go down... Kyushu IP。。。 Domestic dynamic IP change, 5000 lines, convenient.

1. Click the [Network Icon] in the lower right corner of the computer desktop.

2. Next, click [Open Network and Sharing Center] in the pop-up box.

3. Then click [Change Adapter Settings].

4. Then select the network connection you want to change the IP address, here take the wireless network connection as an example.

5. After entering the Wi-Fi connection page, select [Properties] on the pop-up page.

6. After entering the properties page, select the Internet Protocol version.

7. Finally, click [Automatically get IP address] and [Automatically get DNS server address] on the page, and then click [OK] to modify your IP address and surf the Internet normally.

Use the Aurora IP bar, choose the static line inside, and it will always be the same. Your IP will change to a dynamic line, with multiple IPs for one line, which are automatically assigned by the operator.

1.The easiest way to change your IP address is to change your IP address.

2.You can quickly modify your IP with the software

3.The software can use DeepIP

You can use the IP conversion software, and install the software on the computer after my side of the software.

Select the IP point you want to connect and you're ready to go.

618** is currently the best tool for changing IP in many cities, **low, and service. **IP of more than 300 cities in more than 31 provinces in China, supporting various platforms. Support PC, Android, Apple and other systems.

It provides various usage methods and supports various protocols such as PPTP, L2TP, and SSTP.

Self-built computer room, http**, crawler**, ultra-low. A variety of duration options to meet the needs of different users, ultra-high availability rate, support http, https, socks5 and other protocols.

Software name: Rabbit! Sub-dynamic IP

Software language: Chinese simplified.

Software category: Network Acceleration.

Operating environment: WinXP Vista Win7 Win8 Win10 mobile phone.

It is relatively simple to operate, connecting IP to most cities in the country, and millions of IP can be switched at will.

It supports one-click IP switching and timing IP switching, which should meet your needs.

It can be set in the Control Panel, Network and Sharing Settings.

1. Enter the control panel - Network and Internet - Network and Sharing Settings 2, click "Change Adapter Settings" in the upper right corner, and the following interface will appear3. Right-click and select "Local Connection" - Properties.

4. Scroll down to find "Internet Protocol Version 4", double-click 5, and select "Use the IP address below", so that you can enter the IP address you need to set below.

Now it's not so troublesome, just use the tools.

Software name: 618ip dynamic**.

Software Version: General Availability.

Software size: Software type: Chinese Simplified domestic software Free version.

Software category: domestic software - network software - network auxiliary operating environment: winxp win7 win8 mac ipad android iphone

Just do it with this.

The main software used to change the IP is convenient, and the software Hong Kong IP is convenient and simple.

Generally, it is easier to use this software.

Deep IP Converter.

You can only unbind it, otherwise there is no other way.

Because ADSL is now using a virtual IP for surfing the Internet, it will change according to each time you connect, you can try to unbind it, or you can bind it with a mobile phone.

Removing IP Address Modification:

2.On the Group Policy page that opens, go Computer Configuration, User Configuration, Management Module, Network, and Network Connection.

3.On the right, find and select Properties that prohibit access to LAN connection components, and click the Policy Settings button.

4.In the window that opens, check the "Not set" item and click "OK" to complete the setting. After the above settings, the local IP address cannot be modified.

You are doing this because your administrator has modified the system's Group Policy, and if it is modified with software, it is also the Group Policy modified with software.

If you want to change this, you must first be able to log in as an administrator on this computer, i.e. with an administrator account.

If you can, go to "Group Policy" after "Run" and "Write" in "Start".

The Group Policy is described in the Local Computer Policy User Configuration Administrative Templates Network Network and Dial-up Connections field. In the window to the right of the project, find the option "Disable access to the properties of the LAN connection". After double-clicking, the dialog box will come out, select "Not configured", and after confirmation, you can modify the IP.

However, it's highly likely that your administrators will know that you're doing this through their listening management software. Since the company won't let you go online, don't do it to them. Don't let this cause anything bad to happen.

It shouldn't be installed on your computer.

1. Prohibit through local policies.

1. Click "Start" - >Run" - >Input" and click "OK".

2. "User Configuration" - > Management Template" - >Network" - "Network Connection".

3. Double-click "Disallow adding or removing components for LAN connection or remote access connection" and select "Enabled".

4. After the above operations, changing the IP address in "Local Connection" - >Properties" again will not have any effect.

2. Set the IP address to be bound to the MAC address through the router.

1. Log in to the router. Enter in the browser or see the back of the router for details), press Enter, enter the account password as prompted, and click "OK".

2. Click "IP Bind to Mac", select "Enable" in "ARP Binding", and click "Save". Then click on "Add Single Entry".

3. Enter "IP Address" and "MAC Address" as prompted, then select "Bind" and click "OK".

4. Click "Security Settings", select "Firewall Settings", tick before "Enable Firewall" and "Enable MAC Address Filtering", and select "Only allow MAC addresses that have been enabled in the MAC address list to access the Internet". Finally click "Save".

5. Click "MAC address filtering" - "Add new entry", enter the MAC address of the host that is allowed to access the Internet, fill in the name of the host user in the description, select "Effective", and finally click "Save".

6. After this setting, if the client in the LAN changes its IP address, it will not be able to access the network, and will take the initiative to change it back or seek help from the network management.

3. The use of network management software is prohibited.

4. Click "Start" - "All Programs" - "Jusheng Network Management" - "Jusheng Network Management".

5. Click "New Monitoring Network Segment", enter the name of the network segment (enter it casually), click "Next", select "Working Network Card", click the drop-down triangle, and select it.

6. Select the newly created network segment and click "Start Monitoring"—>Enable Monitoring".

7. Click "Network Security Management" - >IP-MAC Binding", check "Enable IP-MAC Binding" and "Send a Forbidden Message when Illegal IP-MAC Binding is Found", and finally click "Save Configuration".

Lock the IP address of the computer Nowadays, many units and companies have established their own local area networks, which allows everyone to contribute limited resources and improve the efficiency of work. But at the same time, there are some minor problems that arise in the LAN from time to time, and IP conflicts are the most common of them. If two or more machines use the same IP, there will be an IP conflict, and the conflicting machine will not be able to connect to the network normally.

Solution: There are many ways to resolve IP conflicts, the easiest way is to reset an unused IP address, but this is too cumbersome. Is there any easy way to lock an IP address to a machine, which is a one-and-done solution, then you need to use the network command arp.

Each NIC has a MAC address, which is unique and will not be duplicated. The arp command is to bind the IP address to the MAC address, even if someone sets this IP address, it cannot be used on the Internet, so as to achieve the purpose of IP address locking. How:

Before you can lock it, you need to get the MAC address of the network card. Enter "ipconfig all" in the DOS window to display the detailed network information of the machine, where the physical address corresponds to the MAC address of the NIC. After obtaining the MAC address of the NIC, you can enter the arp command in the DOS window, and the specific command behavior is "arp -s IP address MAC address", so as to complete the binding of the IP address.

In this case, you can use "arp -a" to view the detailed binding information (as shown in Figure 2), if the type item after the IP address corresponds to static (static), it means that the binding is successful. If you need to delete this binding, it's very simple, just type in "arp -d ip address".

Note: Due to the complexity of the MAC address, you should be careful when entering the command line, the wrong input may cause the local IP address to be incorrect, so that you cannot access the network. At the same time, it should also be noted that running the arp command on the machine can play the role of IP address locking during the period when the machine is turned on and running, and if the machine is turned off, then other machines can still use the IP address of this machine.

Therefore, it is best to execute the lock command on the server side, which can absolutely guarantee the security of the IP address. Using ARP is a great way to protect your IP address, and even if someone uses your IP address, you won't be able to connect to the Internet even if you run this command. However, at this time, your machine will still report IP address conflicting messages, but it doesn't matter, it won't affect your normal network usage.

Simply disabling the modification of the IP address will not work very well.

It is recommended that you set up a LAN with several network segments, set an equal number of terminals for each network segment, and configure a fixed amount of bandwidth for each network segment. In this way, it is impossible to modify the IP address across network segments. In his IP segment, the impact of the change is not great.

Methods and steps 1 for prohibiting modification:

Click [Start] - Run] Enter [to enter [Group Policy] and find [Management Template] in the user configuration on the left side of the [Group Policy] that opens, double-click [Management Template] to find the [Network] item, then the [Settings] category will appear on the right side of the interface, and enter [Network Connection] in the settings category on the right

In the settings we find the properties of the LAN connection component that prohibits access and the Windows 2000 network connection setting for administrators

Double-click on both of these items and set them to the [Enable] state, you can now open the IP settings interface in the network connection, whether the attribute has changed [gray], and no one can modify the IP address now.

Method and step 2 of prohibiting modification:

Obviously, method one is suitable for individuals and not for batch operations in enterprises, and it is not suitable for management. If you are an enterprise user, we recommend that you use the following methods.

Tool: Rabbit. Sub Converter***

Language: Chinese Simplified.

Environment: WinXP Vista Win7-10 Mobile 1Break through the corporate campus.

2.Dynamic converter to do web crawlers!

3.Brush the traffic, brush the click traffic!

Rank up!

5.Modify the converter.