How to take over the neighboring network when the mobile phone is not connected outside

In the field is no network or no network, you can. There is wifi next to it, you can rub the wifi, if it really doesn't work, you can use your own traffic.

1. Turn on the traffic or connect to wifi

2. Ask a friend to open a hot spot and use it first.

3. If the mobile phone still has phone bills, the traffic cannot be used, and the mobile can call 10086 manual service background adjustment.

If you don't have an internet, this problem is more serious! Then, there is only one option left, choose the kind of open wireless network, and do not use the verification code, so that you can access the Internet. Other ways to connect to the Internet, either need a verification code, or a little traffic, the mobile phone has no network, you can't do these can't get on the Internet!

There is no traffic, now there is a wireless wifi network, the speed is fast and not expensive, you can try!!

。As long as the neighbor's wireless network is turned on the SSID broadcast, you may be able to search for the neighbor's wireless network ID number within a certain distance, and then you have to ask the neighbor to give you the wireless network password, enter the correct password, and then you can access the Internet normally. Good luck!

1. Make sure your phone is fine.

2. If there was a signal before and there is no signal now, it may be caused by the failure of the mobile base station or the optimization personnel of the communication base station to optimize and adjust some parameters of the nearby base station.

First of all, you ask yours first.

There is no signal on the mobile phones of nearby friends who are using the same network as you.

For example, if you are mobile, ask your mobile friends.

If there is no signal, it means that your mobile company has a cell tower repair.

In that case, the no signal is temporary, and it will not last for more than 1 day If your friend has a signal, then you look at your phone's network settings!

The reason for the problem:

The network of the surrounding environment is relatively poor, which will lead to the signal being in a non-service state;

Some reasons of the system itself, resulting in the mobile phone cannot be connected to the network;

Problems with the SIM card of the mobile phone;

Solution: Turn on airplane mode and then turn off airplane mode, and the system will search for network signals again. Open [Settings] in your phone, then turn on the button to the right of the [Airplane Mode] option, wait a few seconds and then turn it off;

Fix the no-service issue by resetting the network settings, reverting to the default factory settings, or by restarting the phone;

You can update the system from your phone's [Settings] - [General] - [Software Update], or connect your computer to iTunes.

Here's why.

1. If the phone has airplane mode or Do Not Disturb mode turned on, it will cause the network to be interrupted.

2. The nearby signal or wifi is interrupted, but the mobile phone still shows that there is a signal and wifi, which will also cause the network to be interrupted.

Solution: 1. See if other people around you can access the Internet. Sometimes you are at school or a nearby school, and this school is conducting a big exam, you may not be able to access the Internet due to the school's shielding system, or it may be that the cell base station is malfunctioning. So please check if it's a case first.

Here's an easy way to ask your colleagues and classmates from different mobile operators to find out whether it's a base station problem or a personal problem or a shielding problem.

2. Check whether the network connection of the mobile phone is turned on. Sometimes we may turn off the mobile data switch because the data is about to run out, so you can't access the Internet, or you may have installed optimization software, such as a guard, a master, and turned off your data switch, so please check whether the mobile data switch is turned on. Check the method setting WiFi if the mobile network is ticked.

3. Step 3: Check whether the phone is in arrears and then does not restart. Some mobile phones are in arrears before, and you can play ** but can't access the Internet after opening the payment, so please restart your phone and try it.

5. Check whether the DNS connection mode is enabled on the mobile phone, and enter * * under the dialing interface. Scroll to the bottom to see if it's allowed.

Sixth, call manual customer service to inquire whether there is no GPRS.

1. Confirm whether there is a network, it is recommended to use it in a place with a strong signal; 2. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it; 3. Confirm whether the parameters of the mobile phone have been set; 4. Check whether the Unicom card is plugged in, if it has been plugged in but still cannot be used, it is recommended to go to the business hall to check whether the card is faulty, or change the card for testing; 5. Check whether there is a problem with the mobile phone, and it is recommended to change the phone for testing. If the above situation has not been resolved, it is recommended to contact the manual customer service of the place where you belong for processing.

Generally, there are three situations: first, the terminal; 2. Network; 3. Flow capping; Solution: First, put the card on another mobile phone to test whether it can access the Internet; Second, see if the friends around you who use Unicom mobile phone cards are the same as you, if not, then the local network is fine; 3. The traffic cap can be checked by calling customer service, and the other party will tell you;

Call 10010 and ask the customer service to call the Internet parameters and send them to your mobile phone, install and save them.

The first is to turn off the mobile phone, the second is to take out the Unicom card inside, and the third is to take out the card and find the nearest toilet and throw it in.

You can try a different phone to see if it's a card or a phone problem.

1. The mobile phone has the airplane mode or Do Not Disturb mode turned on, which will cause the network to be interrupted 2. The nearby signal or wifi is interrupted, but the mobile phone still shows that there is a signal and wifi, which will also cause the network to be interrupted.

5. Check whether the DNS connection mode is enabled on the mobile phone, and enter * * under the dialing interface. Scroll to the bottom to see if it's allowed.

Sixth, call manual customer service to inquire whether there is no GPRS.

If there is a problem with the network, do you mean a wireless network or a mobile phone mobile network, if it is wireless, you can try to change a network, if it is mobile, there are many reasons, some are signal reasons, some are the instability of the mobile phone system or the mobile phone itself, such as disconnection, etc., you can first try to change the signal in a good place, or try to update the system, and if it doesn't work, you have to send it to the after-sales service for inspection.

Maybe the location is far away from the network bank, maybe the mobile phone settings are set up, and there is a problem with the quality of the mobile phone.

There is always a network problem when you turn on the phone, it may be that the mobile phone signal is not good, or it may be other reasons, and I can't tell you the specifics, so it's good to restart it generally.

You may not care when the mobile phone signal is bad, but if you don't care, the mobile phone may have no signal for a while, or it may be a hardware problem with the mobile phone, and the mobile phone may not have a signal after a long time, so what should you do when the mobile phone signal is not good?

1. Choose a high ground to use your mobile phone.

In the past, in my hometown, the mobile phone on the first floor was often in a state of no signal, but after the mobile phone was brought to the second floor to use, the mobile phone signal was basically three or four bars, and it was relatively stable. Therefore, when the signal is not good in the place where you are, you may wish to go to a higher position and use it in a place where the window is biased, and many can solve the problem of poor mobile phone signal.

2. Switch between different mobile phone networks.

There are three major network operators in China, namely China Mobile, China Unicom and China Telecom. These three network signals exist at the same time, when you use the mobile network, the signal is not good, friends with conditions may wish to use Telecom or Unicom card, so that many times you can resolve the problem of poor mobile phone signal.

3. Mobile phone signal amplifier to enhance mobile phone signal.

At present, a device called mobile phone signal amplifier is popular among users in remote villages, basements, and families or communities with poor mobile phone signal. A cell phone signal amplifier can amplify the cell phone signal around us, which can improve the quality of the network. It is very practical for users in some of the lower residential areas, basements.

4. Charge the battery.

Sometimes when you take out your phone to look, you happen to receive a lot of messages, which may not be a coincidence, but your message is delayed and delayed. Take a glance at your battery level and see if it's low.

When you're using your phone all the time, it uses more power to fix it to a tower. However, when it comes to standby mode, the phone will save more battery, which may be the reason why the phone can't be updated in time. So, once you suspect that your message is being sent late, the solution is as simple as charging it.

By the way, it will be faster to put your phone into airplane mode to charge.

It could be that there is a problem with your phone itself. Ask someone next to you who is on the same network as you.

It may be that the network is not good, or it may be that the mobile phone is too stuck due to insufficient memory, or that the mobile phone has a virus...

The signal is not good, and it is better to change places. Then there is too much garbage on the phone, so it's better to clean it up.

The settings limit the networking capabilities of the software.

Try it back on. It is likely that the operator network is unstable in the location.

Problems with your phone or the unstable network in your place.

It may be that your signal is not good, or that mobile phone does not support that kind of card.

Should be. The network next to you is not fixed and unstable.

Just go to the repair shop and reinstall the phone, maybe it will take a long time.

Restart your phone, or go to Settings to factory reset your phone.

That's maybe the network really doesn't work, or there is a problem with the phone.

There are certainly problems with the network, and there are also mobile phone reasons.

It may be that the mobile phone signal is not good, you can connect it in another place.

Call the mobile company ** and ask, is it a mobile phone or ** thing.

Factory reset from a new phone.

Maybe the signal is not good, you can try again later.

First, turn on Wi-Fi in your phone's settings and tap to enter Waln.

Second, go to the connected WiFi network;

Again, go to the IP settings, there are "DHCP" and "Static" options in it, select "Static";

Finally, go to the IP address setting page, enter " in "DNS1", enter " in "DNS2", and click OK after the input is completed.

When you encounter this prompt, you need to find a way to reconnect to your phone's network.

2.If you see this prompt, see if you can log in to the other**, if you can log in, you try to change the access point, enter the phone settings - wireless and network - mobile network - access point name, if the phone is unable to access the Internet, first look at the status bar of the phone to see if there is an Internet logo, if not, click the menu key - add - motorola widget - mobile phone Internet control, the horizontal line under the left up and down arrow points green, Then go to Phone Settings - Data Management - Data Transfer - Data Enabled On.

3.If you still can't access the Internet, then go to the mobile phone settings - wireless and network - mobile network - access point name - menu key - reset to default, if you still can't access the Internet, enter the mobile phone settings - mobile network - access point name - menu key - new APN, you only need to enter the first four items, the first item name, custom, the following three items, you can ask the network operator.

Find Settings on your phone.

Tap Wi-Fi or Mobile Network.

You can try restarting your phone and then turning on the mobile data connection.

Change the access point and go to your phone settings - Wireless & Network - Mobile network - Access point name.

If the phone is unable to access the Internet, first look at the status bar of the mobile phone to see if there is an Internet logo, if not, click the menu key - Add - Motorola Widget - Mobile Internet Control, the horizontal line under the up and down arrow on the left is green, and then enter the mobile phone settings - Data Management - Data Transfer - Data has been enabled and turned on.

If you still can't access the Internet, go to the mobile phone settings - wireless and network - mobile network - access point name - menu key - reset to the default value, if you still can't access the Internet, go to the mobile phone settings - mobile network - access point name - menu key - new APN.

The solution to the phone can't connect to wifi

01If you use the router's "lazy mode one-click setting" to configure the router's Internet access parameters, and the encryption authentication method is selected "automatic" by default, then there may be a problem that the mobile phone can connect to WiFi but cannot access the Internet. If the Wi-Fi encryption authentication type is selected to "Automatic" by default, the mobile phone may be able to connect to Wi-Fi but not to access the Internet.

02 Since we know that the WiFi encryption type is selected as "automatic" by default, the solution is very simple, just manually select the wifi encryption type as the most secure and reliable "WPA2-PSK". After restarting the router, all devices will be able to surf the Internet normally. Manually select "WPA2-PSK" as the WiFi encryption authentication class.

If you are using mobile phone data to access the Internet, check whether data transmission is enabled and whether the mobile phone is in arrears.

If none of the above can solve the problem, you can try restarting your phone and then turning on the mobile data connection to try it. If not, you can check if other software can surf the Internet normally.