What is electroplated fiberglass cloth and do you know fiberglass cloth?

Electroplated glass fiber gingham cloth is a non-twisted roving plain weave fabric, which is an important substrate for hand lay-up FRP. The strength of the checkered cloth is mainly in the warp and weft direction of the fabric, for the occasion that requires high warp or weft strength, it can also be woven into a one-way cloth, it can be arranged in the warp or weft direction more untwisted roving, single warp cloth, single weft cloth. Untwisted roving is made by bunching parallel precursors or parallel monofilaments.

According to the glass composition, the untwisted roving can be divided into: e-glass alkali-free glass untwisted roving and c-glass medium-alkali glass untwisted roving.

Fiberglass mesh cloth during use:

The lap width between the alkali-resistant mesh cloth is not less than 50mm, and the alkali-resistant mesh cloth at the yin corner should be pressed and lapped, with a width of 50mm and a sunny corner of 200mm. During construction, the alkali-resistant mesh cloth should be paved smoothly without wrinkles, and the fullness of the mortar should reach 100%, and at the same time, it should be smoothed, straightened, and the squareness and verticality of the yin and yang corners should be maintained.

3. How to identify the quality of alkali-resistant glass fiber mesh cloth

1.The worst glass fiber mesh cloth market ** is usually around Yuanyuan, his glass fiber is usually made of some beer bottles of waste glass, the production process is clay crucible drawing, which is a production process prohibited by the state, and the surface coating is not alkali-resistant emulsion. Intuitively:

The workmanship is relatively rough, generally sold more in the market, often insufficient length, insufficient gram weight, broken twice, the contact is not firm and easy to shift, and it is easy to stab. This kind of mesh cloth is used in the insulation layer generally loses its strength after two months, if the mortar is knocked off and the mesh cloth is taken out, as long as it is gently crushed, the glass fiber yarn will become powdery.

2.In addition, there is a kind of imitation platinum glass fiber mesh cloth, also called mixed yarn. This is a kind of imitation of better glass fiber, but it is usually some flat broken glass with good transparency in the selection of waste glass, and the fiber diameter is relatively fine.

It is sometimes difficult to judge its authenticity on the surface, but its quality does not meet the requirements of the real alkali-resistant mesh cloth in the external insulation of the exterior wall in any case.

3.The standard type of mesh cloth with good quality is made of platinum glass fiber as the base material, which is more particular in the selection of materials and the process of weaving. The emulsions used are all good alkali resistance.

Excellent alkali resistance and high warp and weft tensile strength make the product have a good feel and good construction compliance, and greatly reduce the amount of plastering mortar.

4.Scope of use of alkali-resistant glass fiber mesh cloth in external thermal insulation system:

a.Exterior wall insulation is usually used: 3 3 45 grams, 5 5 80 grams.

b.The insulation system of exterior wall panels is adopted: 5 5 130 grams, 5 5 145 grams.

c.Exterior wall adhesive powder particle system used: 5 5 160 grams.

d.Exterior tile finishes or insulation up to two meters: 3 7 10 300 grams.

Shenzhen Sailong Glass Fiber **** is one of the few manufacturers in Guangdong Province that produces glass fiber on a large scale, mainly producing glass fiber cloth, chopped yarn, glass fiber unidirectional cloth, twill cloth, glass fiber prepreg cloth, colored glass fiber cloth, electroplated glass fiber cloth, multi-axial glass fiber cloth, glass fiber fireproof cloth, silicone cloth, carbon fiber board, fiber powder, fireproof cotton, heat insulation materials, high temperature insulation cotton.

Colored fiberglass cloth, electroplated fiberglass cloth, carbon fiber plate.

Product Introduction

1. The color fiberglass cloth and electroplated fiberglass cloth produced by our factory are widely used in:

1. Surface decoration of leather goods, pen holders, notebooks, mobile phones, jewelry, and furniture.

2. Surface decoration of high-end sports equipment.

Fiberglass can be plated into a variety of different colors:

White, Yellow, Blue, Black, Green, Orange, Red, Purple, Silver, Gold, Blue, Black, Green, Orange, Red, Purple.

2. The carbon fiber plate produced by our factory has a variety of thicknesses and sizes, and the maximum area can produce 1000mm 500mm carbon fiber plate (color carbon fiber plate).

Fiberglass panels are widely used in:

1. Surface decoration of leather goods, pen holders, notebooks, mobile phones, jewelry, and furniture.

2. Surface decoration of high-end sports equipment.

Fiberglass panels can be produced in a variety of different colors according to different requirements of customers

White, Yellow, Blue, Black, Green, Orange, Red, Purple, Silver, Gold, Blue, Black, Green, Orange, Red, Purple.

1. Glass fiber cloth is usually used as a reinforcing material in composite materials, electrical insulating materials and thermal insulation materials, circuit substrates and other fields of the national economy.

2. Fiberglass cloth is mostly used in the lay-up molding process, and fiberglass cloth is mainly used in hulls, storage tanks, cooling towers, ships, vehicles, tanks, etc.

3. Glass fiber cloth is widely used in wall reinforcement, exterior wall insulation, roof waterproofing, etc., and can also be applied to the reinforcement of cement, plastic, asphalt, marble, mosaic and other wall materials, which is an ideal engineering material in the construction industry.

4. Fiberglass cloth is mainly used in industry: heat insulation, fire prevention, and flame retardant. The material absorbs a lot of heat when burned by a flame and prevents the flame from passing through and separating the air.

1. What is fiberglass mesh?

Fiberglass mesh is a mesh fabric woven from fiberglass yarn. Its application field is different, the specific processing method and product mesh size are also different.

Second, the performance of glass fiber mesh.

Fiberglass mesh has the characteristics of good dimensional stability, mildew resistance, fire resistance, toughness, fabric stability, excellent fire performance, and stable color.

3. Various applications of glass fiber mesh.

Due to the performance advantages of glass fiber mesh, it has been widely used in the field of building materials and other fields, the most common is insect-proof mesh, resin grinding wheel mesh, external wall insulation mesh these three categories.

First, let's look at the insect repellent mesh. The product is coated with polyvinyl chloride with glass fiber yarn and woven into a net, and then heat-set. The insect repellent mesh is light in weight and bright in color, which can not only effectively isolate mosquitoes, but also play a certain decorative role.

Uses of fiberglass cloth.

Fiberglass cloth is used in a wide range of applications, and today I will focus on its industrial use.

1.In the construction industry, fiberglass cloth is mainly used in the design of kitchens, fences and decorative panels, which can help us better decorate our homes.

2.In the petrochemical industry, we often use glass fiber cloth to make pipes and storage tanks for the storage of strong acids and alkalis, which is also the application of its chemically stable characteristics.

3.In addition to this, fiberglass cloth is also used by some manufacturers to produce tennis rackets, swimming pools, etc.

Features of fiberglass cloth.

The characteristics of glass fiber cloth are mainly related to its own chemical properties, and the main characteristics have eight aspects, namely:

1.It has very good weather resistance, it can be used between -196 degrees Celsius and 300 degrees Celsius, and the properties of its fabric do not change.

2.Non-adhesive. In the process of using fiberglass cloth, we will not find that it adheres to some other substances, which is also a difference between it and other fabrics.

3.Corrosion-resistant. Because the chemical properties of glass fiber cloth are stable, under normal circumstances, it will not affect its material distribution, even strong acids, strong alkalis and even corrosive solvents such as aqua regia will not affect it.

4.Low coefficient of friction. Because of its low coefficient of friction, fiberglass cloth can achieve a very lubricating effect without using any lubricants.

5.High light transmittance. The light transmittance of glass fiber cloth can reach 6 to 10 percent.

6.Strong insulation. Fiberglass cloth has high insulation, and can also effectively prevent ultraviolet radiation, as well as a certain degree of anti-static electricity.

7.Tough. In industrial production, we use fiberglass cloth because it has strong toughness and is not easy to break.

8.Strong resistance to pesticides.

Fiberglass cloth can be insulated, and most of the exterior walls of buildings are insulated and fixed with fiber cloth.