How to clean a fishing rod, how to clean a fishing rod A few tips for cleaning a fishing rod

It is estimated that you do not have an SSL certificate, it is recommended to install an SSL certificate, so that when you open**, the browser address bar will have a security lock logo, and the company name will also be displayed, and you can also install Norton Security Signature for free, the security signature can show the real identity, easy for customers to identify the authenticity, and prevent phishing. Notify the customer to look for the signature to avoid phishing. Moreover, to install Tianwei Integrity's enterprise SSL, it is necessary to verify the enterprise organization information and domain name ownership information, which is impossible to achieve with counterfeit **.

Maintenance of fishing rods:

In addition to paying attention to handling with care when using it at ordinary times, and not putting it on rocks and sand at will, the key is to go home after fishing and carefully maintain the fishing rod.

One is that the weather is sunny fishing, the fishing rod is exposed to the sun for a day, the natural water in the rod is consumed a lot, and then the rod is bored, over time, it will form a "withered rod", lose its elasticity, and one day it will suddenly appear due to elasticity and break.

How to take care of it:

After fishing, go home, first use hot wipes (about 50 degrees) to gently wipe the fishing rod back and forth, (called hydration), wait for 20 minutes, and then use a piece of flannel to wipe the wax (there is no wax to light the candle and drip on the flannel) wrap the rod and gently wipe it (called waxing), and finally dry the rod overnight;

The second is fishing in rainy days, the fishing rod is wet with rain, although the fishing rod has been wiped with a cloth when the rod is harvested on the day, but the humidity is still very heavy, the next day to open the fishing rod will still feel a little wet, for a long time, not only the surface of the fishing rod will peel off, but also will gradually weathered (especially the second rod and even the first three sections of the fishing rod), encounter hooked weeds.

Or at a certain moment when a fish is caught, there will be a breakage.

The maintenance method of this situation is relatively simple, that is, after fishing in the rain, you must wipe each section of the fishing rod with a dry cloth when you go home, and then arrange it in a ventilated place to dry overnight.

In addition, the fishing rod should be waxed regularly and maintained frequently, not only the fishing rod is good to hold up when in use, but also the service life will be great.

Fishing is one of people's favorite sports, so after fully enjoying the fun of fishing, are you also facing all kinds of troubles caused by poor maintenance of fishing rods? Let's take a look at how veteran anglers maintain their fishing rods. Some anglers do not pay much attention to the maintenance of fishing rods, especially some beginners think that maintaining fishing rods is a "superfluous" thing.

Over time, no matter how good your fishing rod is, or how expensive the fishing rod is, the light one will blister the outer layer of patent leather, and the heavy one will fall off, like a "bitter melon", and even become soft and lose its original toughness. This is all due to the fact that the rod is not dried in time after wetting. After fishing, whether it rains or not, use a clean, absorbent dry cloth (e.g. . . ) when reeling the rod

towels, cotton cloths, etc.) Wipe the rod section by section. When you get home, you should disassemble it all and dry it, and if you find that there is still some water or other debris on the fishing rod, you can wipe it again until it is dry. At the same time, a thin layer of "wax" or "rod oil" can be applied to the rod to increase the waterproofness of the rod.

Place the rod in a ventilated and cool place to dry the moisture in it, but it should not be exposed to the sun, nor should it be placed next to the stove and heater, and should not be placed in the trunk of the car for a long time. This is because the rod is made of carbon fiber.

cloth or fiberglass cloth, bathed with epoxy resin.

Aldehyde resin, hollow tube or solid rod body formed after curing at high temperature and then cooling. If the resin is softened after high temperature baking, and the water in the rod is used after use, it will turn into water vapor after high temperature baking.

The paint on the surface of the rod will blister and peel off, which will affect the service life.

1. Absolutely do not use cleaning brushes, grinding powder, gasoline, etc., these will hurt the coating and even materials, when cleaning the attached seawater, use alkaline water to clean and then clean with water, and the rest can be cleaned with pure water and wiped clean.

2. If there are stains that are not treated during cleaning, it will cause the natural fading of the electroplating surface and other surface treatments, and the corrosion of the metal surface of Shibi and cause the defect of the tail cover. In order to prevent this phenomenon, it is necessary to wipe the rod and fishing gear with sufficient damage.

3. The stained fishing rod and fishing gear are placed in a sealed state, and the protrusion of the coating surface is caused by the moisture inside, that is, blistering. To prevent foaming, wipe the water droplets dry after use and place them in a ventilated place to dry in the shade to allow the water to evaporate.

When we clean the inner wall of the fishing rod, it is difficult to clean it. After many experiments, I found a better way to clean it, and now I will share it with you.

Tools Raw materials.

There are 5-6 cow tendon threads used by the cobbler to mend shoes, each one is one meter long, and the cloth strip is a strip of pure cotton underwear, and the size of the cloth strip is different to cope with the inner diameter of each pole.

Method steps.

1 We can choose the corresponding cow tendon rope with cloth strips according to the inner diameter of the rod section to penetrate it, one end of the rope is stepped on with the foot, the other end is held tightly with one hand and held upward, and the other hand grasps the rod section to be cleaned to do up and down movement, so that the cloth strip is wiped on the inner wall of the fishing rod, as long as 2-3 times the inner wall can be cleaned. This method is also very convenient.

Precautions. It is necessary to choose cotton cloth strips, because cotton underwear cloth strips are strong and elastic, can be in close contact with the inner wall of the rod, and the cleaning effect is good.