What solvent does 200 refer to in chemical raw materials?

According to the boiling range, solvent oil can be divided into three categories: low boiling point solvent oil, such as 6 extraction solvent oil, boiling range of 60-90; Medium boiling point solvent oil, such as rubber solvent oil, the boiling range is 80-120; High boiling point solvent oil, such as paint solvent oil, has a boiling range of 140-200, and the dry point of ink solvent oil, which has been widely used in recent years, can be as high as 300. In general, 60 90 is called extracted solvent oil, that is, people often say 6 solvent oil; 80 120 is called rubber solvent oil, that is, people often say 120 solvent oil; 140 200 is called paint solvent oil, i.e. 200 solvent oil.

In addition, there are ink solvent oils, dry cleaning solvent oils, etc. Sometimes, the cutting of the distillation process will also vary from business to enterprise. For example, 6 solvent oil, some manufacturers have a distillation range of 60 75, usually we call it narrow 6 solvent oil, to show the difference.

According to the actual production, the distillation range of 120 solvent oil is often controlled between 90 and 120.

According to the chemical structure, solvent oil can be divided into three types: paraffins, naphthenes and aromatic hydrocarbons. In fact, with the exception of a few pure hydrocarbon compounds such as ethane, toluene, and xylene, solvent oils are mixtures of various structural hydrocarbons. In terms of chemical composition, it can be divided into paraffins, naphthenes and aromatic hydrocarbons.

Commonly known as solvent oil, it is paraffin. Aromatic hydrocarbons refer to benzene, toluene, xylene, etc.

It is divided into national standard 200 and aromatic hydrocarbons 200, the distillation range is the same, the specific gravity is different, the national standard 200 is a solvent oil, does not contain aromatic hydrocarbons, is lower than 80, generally around 75.

No. 200 extracts solvent oil, to put it bluntly, No. 200 gasoline.

No. 200 solvent oil, solvent oil, is refined by deodorizing, cutting, and hydrogenation of the straight-run fraction of petroleum. 200 solvent oil is used as a solvent and thinner in the paint industry. Features::

The solvent is mainly used as a chemical solvent, it has good solubility performance, the product does not contain tetraethyl aluminum, low sulfur content, this product is volatile, flammable and explosive. Strong solubility to oil and fat, good stability, the product is colorless, transparent liquid, long-term storage unchanged.

Upstairs is the scientific name, as well as its industrial use, its civilian use is mainly used for laundry laundry, using its colorless, odorless and volatile characteristics, to wash clothes, also called 200 washing oil.

Physical properties: primary distillation point: 190-245

Density: Appearance: Colorless and transparent.

Uses: Used as solvent and thinner in the paint industry. The solvent is mainly used as a chemical solvent, it has good solubility, volatile, flammable and explosive. Strong solubility to oil and fat.

Pull out part of the fraction of naphtha and direct diesel in the atmospheric pressure device, and control the distillation range between 140 200, which can directly produce 200 solvent oil.

No. 200 solvent oil.

Also known as rosin perfume, it got its name because it was originally widely used in the paint industry instead of turpentine. It is a solvent oil used in coatings. Consists of 140 -200 petroleum fractions.

It can dissolve phenolic resin paint, ester glue paint, alkyd blending resin and long oil alkyd resin, etc.

Properties: Appearance: colorless or yellowish liquid, solubility:

Insoluble in water, soluble in most organic solvent uses: widely used as a solvent in oil-based paints, ester paints, phenolic paints and alkyd paints to reduce paint viscosity and facilitate construction. It is suitable as a solvent and diluent in the coating industry.

Market value: Can be used for ultra-fast drying oil slurries, pigment thinners, precision instrument cleaners and adhesives Solvent oil is one of the five major categories of petroleum products. Solvent oils are used in a wide range of applications. The largest amount of paint solvent oil (commonly known as paint solvent oil), followed by edible oil, printing ink, leather, pesticides, pesticides, rubber, cosmetics, spices, medicine, electronic components and other solvent oils.

This question is difficult to answer, the oil density of different oilfields is not the same, their refining process is also a small difference, the process of removing impurities is not necessarily the same, the less impurities, the smaller the density, the smallest in Jinzhou, followed by Daqing, Shandong, and further south of the contact is relatively less, it is best to release information in **, ask the oil of each plant, sometimes it is not the same batch**, even if the density of the same plant is not the same.

The main component of GB 200 is alkanes. There are trace amounts of olefins and small amounts of aromatic hydrocarbons.

The raw materials used to produce the national standard No. 200 are different, and the ingredients vary greatly.

The national standard No. 200 produced by the reformer pumping residual oil is mainly naphthenes, density.

The national standard No. 200 produced with naphtha or DC gasoline and condensate is mainly a straight-chain alkane with density. So, the density of number 200:

ABS plastic is a terpolymer composed of butadiene-acrylonitrile-styrene, commonly known as ABS plastic, its critical surface tension is 34-38mn cm, heat deflection temperature is 70-107, the solvents that can dissolve ABS plastics are ketones, benzene and ester solvents, and alcohol and hydrocarbon solvents have no dissolution effect on ABS plastics, so the selected ABS special coatings should generally contain an appropriate amount of the above solvents and non-solvents. ABS plastic has a wide range of coating options, mainly thermoplastic acrylic coatings, as well as epoxy alkyd nitro paints, etc., the following is an example of a special coating resin for ABS plastics. Acrylic resin composition:

Methyl methacrylate 40%-45% methacrylic acid 2% butyl methacrylate 35%-40% benzoyl peroxide 2%-5% hydroxyethyl acrylate 20% azodiisobutyronitrile 1%-2% Solvent composition: toluene, xylene 50 parts 200 solvent gasoline 20 parts butyl acetate 30 parts.

Good afternoon, 200 solvent oil can only be limited in solubility with acrylic resin, generally insoluble, which contains a large amount of alkanes resulting in some benzene-soluble acrylic resins can only be partially dissolved in the remaining small amount of xylene and trimethylbenzene, xylene, trimethylbenzene and alkanes are not good solvents for acrylic resin, please refer to. In general, neither 6 nor 200 is a good choice for diluting acrylic varnishes.

6. Solvent oil, also known as extraction oil, is mainly used for extraction or chemical leaching in edible oil processing.

and 150 are used as solvents or diluents in the ink and coating industry.

Solvent oil is a rubber processing oil, and it is also used in many refining companies to make gasoline.

6. Solvent oil can be used as vegetable oil extraction, adhesive solvent.

Solvent oil can be used as a solvent for paints, rubber industry, adhesive industry, cleaning industry.

Good afternoon, the main raw material of alcohol-based fuel is methanol, the hydrocarbon part is 6 or 200 solvent oil and gasoline, the two mutual solvents are EGBE (ethylene glycol butyl ether), and the octane booster is EHNA (isooctyl nitrate, which can also be omitted), which is the basic formula of general alcohol-based oil, and the main reason for improving its combustion calorific value is to replace it with a more effective octane booster, and you can add tetraethyl lead or tetraethyltin if possible, but in terms of performance, the alcohol base is not as good as gasoline no matter how it is modified. Please refer to it and be aware of it.

Crude methanol, the main raw material of alcohol-based fuel, alcohol-based fuel is a hot spot for the development of today's civil fuel, and the promotion of this technology has attracted great attention from relevant ministries and commissions of the state. At present, the alcohol-based fuel of the country is mainly used in the cooker, but there are many problems in the development of the alcohol-based fuel and the cooker at present, such as the complex fuel formulation, the implementation of a unified standard, a large amount of water and some harmful substances in the fuel.

There are currently three types of alcohol-based fuels:

Alcohol-water fuels. That is, the fuel contains more than 20% water. Methanol fuel already has a low calorific value, which, combined with water, makes the fuel even lower.

Many units engaged in alcohol water fuel claim that adding water to alcohol, and adding a certain catalyst can make water split, produce hydrogen and increase the calorific value. This is a wrong concept that violates scientific principles, so so far, we have seen that the use effect of alcohol-based fuels is very poor, and the calorific value cannot meet the technical requirements of the industry standard of "alcohol-based civil fuels", and the gasification effect of the stove using this alcohol-water fuel is not good, and the structure design of the stove is complex. We don't think this fuel can be promoted.

Alcohol-based fuels. This fuel mainly adds 10% hydrocarbons to crude methanol to increase the calorific value of the fuel. Due to the addition of hydrocarbons, it is easy to stratify alcohol-based fuels during storage and use, and appropriate addition of co-solvents makes alcohol-based fuels and hydrocarbons evenly mixed without stratification.

At present, this fuel is used more, but the promotion of this fuel must control the formula of the fuel, and it is best to not exceed 3 yuan (excluding water) of the combination of fuel formula, that is, methanol - co-solvent - hydrocarbons. It is strictly forbidden to add harmful organic chemical products as additives, which complicate the formulation. At the same time, it is best to control the water content not to exceed 10%, and the hydrocarbon content should be suitable for the cooker.

Alcohol ether fuels. Alcohol ether fuel technology is mainly developed by the Southwest Research Institute of Chemical Industry of the Ministry of Chemical Industry, the characteristics of this fuel is that most of the dimethyl ether is dissolved in methanol and water, and at the same time, the pressure required for the raw material is generated by the dimethyl ether in the cylinder, so as to avoid the existing alcohol water, alcohol hydrocarbon fuel in the ignition process need to be preheated and pressurized, is a promising fuel. However, due to the high cost of dimethyl ether, the difficulty of storage, and the fact that the fuel contains more water, it is difficult to produce supporting stove fuel, so it is difficult to promote it now.

We believe that alcohol-based fuels should now promote the second alcohol-based fuel, and with the improvement of people's living standards, the gradual promotion of alcohol-based ether-type fuels with lower water content.

When used in paints and coatings, it can be used as a substitute for aromatic solvent oil.