The Mercedes Benz car can t start, how to hang neutral, push the cart, is there a mechanism for hang

For short distances, it is possible to put in neutral.

The specific way to do this is to screw the key to the AC and press the brakes to push the gear to N gear.

1.Spark plug.

Loss of ignition ability.

2.Throttle.

There was a malfunction. Both of these problems can cause engine shake and unstable speed.

3.Carbon deposits. It will cause insufficient gasoline combustion and cause the engine to shake. The impact of engine carbon deposition on the car is quite large, first of all, to reduce the engine power, that is, to make the power output uneven and gradually decay, in other words, more and more powerless.

The second is to increase fuel consumption and increase your financial burden.

The third is cold start.

Difficult, that is, difficult to ignore, not easy to get on the car, and finally the combustion chamber carbon deposition is strict, and a heavy one will also cause cylinder detonation, and there is a sound of low-speed acceleration, which will have a sound on the piston and crankshaft.

Causing damage, causing high engine temperatures and seriously affecting car safety. Then there is the excessive discharge, which not only fails the annual inspection and inspection, but also directly aggravates the harm of polluting the environment.

4.Gearbox.

Load operation will destroy the quality and friction characteristics of the transmission oil, increase friction and wear, and the transmission noise will follow, and at the same time, sludge (impurities or dirt) will also be generated inside the transmission (such as the valve body), resulting in the transmission stalling, outshifting, impact, slippage, stalling, abnormal noise, delay, high temperature, oil leakage.

Mine is the same as yours, how to solve the end of you.

I have the same problem as you! May I ask Master, how did you solve it after that?

Pull the wire gearbox, open the key, step on the brakes, press the gear knob button, there is no reason why you can't be in gear.

This situation could be a damaged gearbox computer, or a damaged gearbox. After this happens, we have to go to the 4S shop for inspection and repair. Mercedes Benz is a car manufacturer from Germany. Mercedes-Benz has a lot of sedans and SUVs, and many of Mercedes-Benz's models are domestically produced.

Mercedes-Benz's domestic models include A-class, C-class, E-class, GLA, GLB, GLC, etc.

The GLB is a compact SUV owned by Mercedes-Benz. The car is powered by two engines, a low-power version with a turbocharged engine and a high-powered version with a turbocharged engine.

The low-power version has a turbocharged engine with a maximum torque of 136 hp and 200 Nm. The engine has a maximum power speed of 5,500 rpm and a maximum torque speed of 1,460 to 4,000 rpm. The engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block.

This engine is mated to a 7-speed power shift.

The high-power version of the turbocharged engine has a maximum of 163 hp and 250 Nm of torque. The engine has a maximum power speed of 5,500 rpm and a maximum torque speed of 1,620 to 4,000 rpm. The engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block.

This engine is mated to the Huiyan 7-speed power shift.

The front suspension of the GLB adopts a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.

Millions of car purchase subsidies.

The reasons why the car cannot be put in gear after starting: 1. There is a fault on the inside of the gear lever assembly, the gear on the inside of the gear lever is worn, and the gear lever is stuck due to the hunger of the side, and it is very difficult to pull back and forth; 2. The P-gear locking nuclear return solenoid valve in the gear lever is faulty, and the brake switch is faulty; 3. The clutch is not completely separated, which may be caused by the failure of the clutch plate and the clutch plate pressure plate, which generally needs to replace the clutch three-piece set; 4. The battery leaks, and the power is insufficient and cannot be started.

Mercedes-Benz car can not start, first of all, to identify the cause of the fault, Qixiao for the engine can not start this kind of fault diagnosis, the first should be to detect the battery. It must be clear whether the engine does not start because the battery is insufficient. The boot system is then detected.

Detect the circuitry in the engine starting system first. From the perspective of the most basic composition, the circuit of the starting system generally includes the following basic parts, that is, the battery, the starting motor and the cable connecting these parts.

Of course, in addition to this, ignition switches, starter relays or solenoid coils, as well as in-vehicle anti-theft systems, are also important components of the starting system.

Photo by Car Picker) NIO EC6 Xpeng P7 Marvel R VOYAH Free Audi A4L Model Y @2019