My Dopod 838 suddenly can t find the card MINISD!!

Solution: 1. Hard start the machine - eliminate the problem of software compatibility conflict.

Method 1: Press and hold the upper left corner (wireless start), upper right corner (recording) and power supply with your left hand at the same time, then use the right stylus to reset, wait for about 5 seconds and press the ** button;

Method 2: Factory reset --- system --- settings Enter 12342, format the SD card, change the brand SD card - eliminate the SD card compatibility problem (all the personal information on the card will be lost, use with caution!) ）

3. Change to a WM6 version and re-flash the machine.

What do you mean by contradicting each other??

The computer doesn't recognize it, and how do you know it when you put it in the reader?

But you can find a card that you're sure it's good and put it in the machine.

Brush back to WM5 and take a look. That's a matter of minutes.

But I looked at what you said the card reader didn't recognize.

It is said that the computer does not recognize it.

I'm confused.

Mine is the same, the phone shows that the card slot is used, but the memory card is shown not installed.

The card reader can recognize the card, but the computer can't read the card in the card reader, right?

Brother, our symptoms are exactly the same.

First find a card that the computer can recognize and put it in the machine, if it doesn't work, it's a problem with the machine. You can flash a good ROM and put a good card in, if it doesn't work, it's a hardware problem.

Reboot it to see if it's broken.

It's very likely that there is a problem with the phone's settings.

For example, the server settings have been changed by activesync.

You go to Settings-Connection-Manage Connection to see, http's ** server should be mobile, I don't know Unicom), port 80.

In the future, it is okay to set the unit settings of the activesync connection instead of the default settings.

Hello! Sorry for the unpleasant experience, what is your UC version? Is there any software that restricts UC Browser from connecting to the Internet?

It is recommended that you can click on the menu-tool-check the network to see if it is normal If it is normal, please restart the phone to try If the problem has not been solved, please continue to consult me or Weibo @uc Browser - Customer Service Elf, I wish you a good mood today.

One of the easiest ways to do this is to restore the GPRS default settings and then select the correct access point on the software you want to run, which is one of the two access points in GPRS.

Re-set the network, if it doesn't work, you can log the machine, and if it doesn't work, you can flash the phone, right? This problem occurs a lot of times with Dopoda machines, and I use Caesar the same, and there will still be some minor problems, but I can solve it with my hands.

Restore the factory settings! It could be a gateway issue! If your mobile phone is in arrears, you can't connect to the Internet.

Upstairs, are you embarrassed to paste it?

byl！！！

It's best not to flash the machine, there is a risk in flashing, you have to brush, and it's best to brush it!

Don't flash the machine first, hard up!

The following thing I found for you from the Internet: the photo key and the record key, and then poke reset, and after the prompt appears, press the ** button.

Dopod 838 hard boot method.

Press and hold the upper left corner (wireless start), upper right corner (recording) and power at the same time with your left hand, and then use the right stylus to reset, wait for about 5 seconds and press the ** button;

838: Left record key + right voice command voice command key + middle confirmation key + reset reset key (press once to release), this action lasts for more than 30 seconds, after the confirmation window appears on the screen, press and then press the send dial key.

Try it or not! It's risk-free!

It could just be a software conflict, try the simple, elimination method first.

Back up the data of the mobile phone first, press and hold the upper left corner (wireless start), upper right corner (recording) and power at the same time with your left hand, and then use the right stylus to reset, wait for about 5 seconds and press the ** button;

This is a fake signal.,It's full of it, but it's not.,You try to change a different card and try it's not like this.,No, go to brush the machine.,So it's not okay to fix the signal and attack it.。

This situation of the landlord I have encountered before It may be a problem with the signal amplifier, that is, a problem with the hardware, not necessarily bad, it may also be a bad contact, if it is really broken, change it for about 100 yuan, you can take the machine to the store to test it.

Going to customer service may be due to hardware.

It may be a problem with the signal amplifier, that is, a problem with the hardware It is not necessarily bad It may also be a bad contact If it is really broken, change it to about 100 yuan You can take the machine to the store to detect, or it may be a false signal, it is full of it, in fact, there is no, you try to change a different card to try or not, it is not possible to brush the machine, so it is not possible to repair the signal to attack and release. You don't want to brush it yourself, it will.

Your kind of problem should not be a ROM, it is due to the drop of the phone, the hardware inside may be misplaced, it is recommended that you consult a person specializing in dopod mobile phones.

It's a waste to use Dopod and haven't learned to flash the machine.

Hurry up and go to the mobile phone home of the Dopoda 838 forum to learn,Flashing is very simple, after you press the power button on the top,Which one do you press again?,Is it the green key of the navigation below?

It is recommended that you flash the machine first, and then see the situation.

Is this still a master? Your PPC needs to be flashed. Just brush it, maybe the power supply caused your system to go wrong when you fell. Brush it down first to see if it can be, if it still doesn't work, you have to find a hardware maintenance master.

Hardware problems: It may not be properly connected when changing the card slot.

Well, it doesn't look like it's been fixed.

Let's fix it again.

This is a problem with the card slot connection, and I have to go to the repair station again.

Go to him and ask him what he eats.

The quality of the card is not good, I want not to have this problem in the future, change the card I have bought an inferior memory card and tried it a few times I have bought a Toshiba for two years and have never tried it.

Copy what you want to keep first, just click on that and don't copy it all. Formatting it once in the phone should be OK.。。。

Yours is the system, right? Before you can't find it, it's not forced to close the program that hasn't been filed.,It's very simple to deal with.,You click to set it; It's OK to clear the memory in the system.,It's just that the things in your machine are gone.,Back to factory settings.,It's recommended to back up only the code.,But the things in the memory card are still there.。

There may be a problem with the card, there is a memory card tool in 838 that you can try, maybe it can be done.

It's a problem with the machine software.,It's recommended to re-flash the machine.,Brushed.,Mine is.,It's very stable.。

Generally, if the cab format file is installed, you will choose to install it on the fuselage or storagecard, the latter is the memory card, and some systems will not prompt, it is recommended to swipe the machine to see, or hard up, the specific steps of hard up can be searched or system-settings-clear memory and then see.

It's really not good, you can only update the operating system, it's just flashing, there are tutorials in major forums, you can refer to it, pocket digital, etc., flashing is risky, take a closer look at the flashing tutorial, I hope it can help you.

CAB generally has a choice! Unless you install system files (such as changing SMS background, MMS packets, office, patches, etc.), it will be automatically installed in the memory.

Some software will prompt and some software will not prompt the folder is automatic.

There are different software and there are different systems.