The components of the horizontal band sawing machine, the composition of the main drive system of th

According to the structure, it is divided into horizontal band sawing machine, vertical band sawing machine, and horizontal band sawing machine is divided into scissor type, double column and single column band sawing machine; According to the use situation, it is divided into manual type (economical type, manual feeding, manual cutting materials), automatic type; According to the automation program using the controller, it can be divided into manual type (semi-automatic manual feeding) and fully automatic type (automatic feeding and automatic cutting); According to the requirements of the cutting angle, it is divided into angle sawing machine (can saw, 90 degrees and 45 degrees), no angle, that is, 90 degrees, vertical cutting. If you want to know more about it, you can consult Wuxi Zhengchuan CNC sawing machine, which is produced by the company"Masagawa"Brand horizontal, vertical, column, gantry series of automatic, semi-automatic metal band sawing machine, with high technology content, high efficiency and energy saving, reasonable structure, stable quality and other characteristics. Widely used in ferrous, non-ferrous metals, plastics and...

The main components of the horizontal metal band sawing machine are: bottom sitting; bed, column; saw beams and transmission mechanisms; guides; workpiece clamping; tensioning device; feeding racks; hydraulic transmission system; electrical control system; Lubrication and cooling systems.

The hydraulic transmission system is composed of a hydraulic circuit composed of pumps, valves, cylinders, oil tanks, pipelines and other components, which completes the lifting of the saw beam and the clamping of the workpiece under electrical control. Through the speed control valve, the stepless speed regulation of the feed speed can be implemented to meet the sawing needs of different material workpieces.

The electrical control system is composed of a control loop composed of an electrical box, a control box, a junction box, a travel switch, an electromagnet, etc., which is used to control the rotation of the saw blade, the lifting of the saw beam, the clamping of the workpiece, etc., so that it can realize the normal cutting cycle according to a certain working procedure.

Before starting the lubrication system, it must be lubricated according to the lubrication parts of the machine tool (wire brush shaft, worm gear box, active bearing seat, worm bearing, lifting cylinder upper and lower shafts, and movable vise sliding surface clamping screw). The worm gear and worm in the worm gear box are lubricated by No. 30 oil bath, injected by the oil plug hole on the upper part of the worm gear box, and the fairy surface of the box is equipped with an oil standard, when the saw beam is located in the lowest position, the oil level should be located between the upper and lower limits of the oil standard. The oil should be changed after one month of trial, and the oil should be changed once every 3 6 months, and the lower part of the worm gear box is provided with an oil drain plug.

Summary. Dear and hello, the composition of the main drive system of the horizontal band sawing machine is as follows:1

Motor: The main mechanical component of the drive system, generally using an asynchronous motor or a DC motor. 2.

Transmission reducer: adjust the output speed of the motor to meet the working requirements of the main drive system. 3.

Transmission shaft: transmits the power of the motor after deceleration to the main drive system. 4.

Gearbox: used to adjust the transmission ratio to meet the working requirements under different working conditions. 5.

Saw blade shaft: transmits the power of the saw blade pusher to the saw blade to achieve sawing operations. 6.

Hydraulics: Control the driving force of the saw blade for precise control of the sawing operation.

Dear and hello, the composition of the main drive system of the horizontal band sawing machine is as follows:1Motor:

The main selling front of the main drive system is a mechanical component, which generally uses an asynchronous motor or a DC medium potato motor. 2.Transmission reducer:

Adjust the motor output speed to meet the working requirements of the main drive system. 3.Propeller shaft:

The power decelerated by the motor is transmitted to the main drive system. 4.Tooth hand reputation wheel box:

It is used to adjust the transmission ratio to meet the working requirements under different working conditions. 5.Saw blade shaft:

The power of the saw blade pusher is transferred to the saw blade for sawing operations. 6.Hydraulics:

Control the driving force of the saw blade for precise control of the sawing operation.

The main drivetrain of this.

Dear <> happy to answer some of the questions include:1Main Motor:

An electric motor used to drive the main drive system of the sawing machine. 2.Propeller shaft:

A component used to transfer the power of the main motor to the sawing machine member. 3.Transmission wheels:

A component used to transmit power from a drive shaft to a sawing machine member. 4.Transmission bearings:

It is used for the components of the transmission shaft and the transmission wheel. 5.Gears:

A component used to transmit power on the drive shaft to the sawing machine member. 6.Brakes:

Components used to control the movement of the sawing machine. Pro-<>

I am glad to answer for you 1. Motor: the main power source used to drive the entire sawing machine, generally using three-phase AC motor; 2. Clutch: used to control the start and stop of the motor, generally using clutch or circuit breaker; 3. Reducer:

It is used to reduce the speed of the motor, and the gear reducer is generally used; 4. Bearing: used to support and support the main shaft of the entire sawing machine, generally using rolling bearing or sliding bearing; 5. Spindle: the main component used to drag and drive the movement of the saw blade, generally using high-strength shaft material; 6. Bearing seat:

The basic components used to install the bearings are generally made of cast iron or cast steel; 7. Transmission wheel: used to transmit power, generally made of cast iron or cast steel; 8. Transmission saw blade: the main component used for the movement of the transmission saw blade, generally made of high-strength steel materials; 9. Safety valve:

It is used to control the running state of the motor, and generally uses a digging safety valve or circuit breaker.

Hello Kiss Yo Vertical band sawing machine is a commonly used metal cutting equipment, and the following are the steps to use it:1Preparation:

First of all, you need to fix the metal material to be processed on the workbench, adjust the height and angle of the workbench, and then check whether the saw blade is installed correctly, whether there are loose or worn and other problems. 2.Start the device:

Turn on the power, start the motor, make the saw blade start to rotate, and adjust the cutting speed and feed speed. 3.Start cutting:

Move the metal material to be processed in front of the saw blade and slowly advance until the saw blade begins to cut, taking care to maintain a stable feed rate and pressure to avoid the saw blade breaking or overheating. 4.Complete the Cutting Spring Lifting Circumcision:

When the cutting is completed, turn off the power, stop the rotation of the saw blade, and wait for the saw blade to stop, then you can open the machine cover and take out the cut metal material. 5.Clean up your device:

Use a vacuum cleaner or brush to clean metal shavings and oil stains from the surface and inside of the device to keep it clean and functioning properly. For your health and personal safety, please pay attention to the following during use:1

Be sure to wear protective glasses and gloves when using the device to avoid accidental injury. 2.During the cutting process, it is necessary to pay attention to the wear and looseness of the saw blade, and replace or adjust it in time.

3.Do not leave the equipment when it is running, so as to avoid accidents. 4.

When using the equipment, it should be operated in accordance with the operating instructions and safety regulations to avoid illegal operation.

Hello, it is a pleasure to answer your questions, we have found the answer for you, vertical band sawing machine is a common metal cutting equipment, mainly used to process various types and shapes of metal materials. The following is how to use the vertical band sawing machine:1

Preparation: First of all, you need to check whether the various parts of the vertical band sawing machine are intact, such as the drive train field, guide rails, fixtures, etc. Then it is necessary to select the appropriate saw blade according to the metal material to be processed, adjust and install it.

2.Adjust cutting parameters: According to the type and size of the metal material to be processed, you need to adjust the cutting speed, feed rate, saw blade tension and other parameters of the vertical band sawing machine.

These parameters affect the cutting effect and the life of the equipment, and need to be adjusted according to the actual situation. 3.Mounting Fixture:

The metal material to be machined is placed on the fixture and clamped by means of screws or handles. Make sure the clamp is firm and reliable to avoid displacement or deformation during the cutting process. 4.

Start cutting: Start the vertical band saw machine and let the saw blade rotate. The workpiece is then slowly pushed in the direction of the saw blade, taking care to maintain stability and avoid overfeeding.

During the cutting process, it is necessary to pay attention to observe whether the cutting line is normal, and if any abnormal situation is found, it needs to be stopped in time for adjustment. 5.End of cutting:

When the workpiece is completely cut, the vertical band sawing machine is closed and cleaned. At the same time, the saw blade needs to be inspected for wear or damage, and replaced or repaired. It should be noted that when using a vertical band sawing machine, it is necessary to strictly abide by the safety operation procedures, wear safety helmets, goggles and other protective equipment, and avoid accidents.

1. The operation and maintenance personnel of the band sawing machine must undergo professional training and master the operation and maintenance skills of the band sawing machine. Workers should ensure adequate sleep and stay focused.

2. When changing speeds, you must stop first and then open the protective cover, turn the handle to relax the belt, place the V-belt in the groove of the required speed, and then tighten the belt and cover the protective cover.

3. The adjustment of the chip removal wire brush should make the wire contact the teeth of the band saw blade, but do not exceed the root of the teeth, and pay attention to whether the wire brush can remove the iron filings.

4. Adjust the guide arm along the dovetail guide rail according to the size of the processed workpiece, and the guide device must be locked after the adjustment.

5. The maximum diameter of the sawn material shall not exceed the regulations, and the workpiece must be clamped firmly.

6. The band saw blade should be properly tightened, and the speed and feed must be appropriate.

7. Cast iron, copper and aluminum parts do not add cutting fluid, and others need to add cutting fluid.

8. The saw blade is broken during the cutting process, and after the new saw blade is replaced, the workpiece must be turned over and sawed again, and the saw bow should be put down slowly and not impacted.

9. During the cutting process, the operator is strictly forbidden to leave the post and operate with gloves.

10. At the end of each shift, the power supply must be cut off, the protective cover must be opened, the chips that are brought into the saw wheel must be removed, and the daily maintenance and surrounding cleaning work must be done.

Before using the band sawing machine, we should carefully check whether the sawing wheel of the sawing machine is running in the correct direction, whether the tension of the band saw blade used is appropriate, and whether the pressure of the band sawing machine is sufficient.

To adjust the position of the guide arm and the position of the saw frame, first of all, test the empty car to check whether the band sawing machine runs smoothly and whether the clamping device has noise.