Solve the problem of Nokia 3100 to reset the time after every shutdown and reboot?

One way to do this is to enable GPRS at the same time as "Update time to be confirmed" in the time settings. After turning on the computer, you can set a random time, and then browse the home page of GPRS, it will prompt you whether to update the time, and "OK" will make the time update to the standard time.

Another method is: don't let the battery run out and make the machine automatically shut down, and at the same time, it is best to replace it within 3 seconds after shutting down when changing the battery.

This is because there is a spare battery on the motherboard, which is used to supply power to the motherboard when there is no power supply, and after a long time, the backup battery is out of power, and the above situation will occur, and you can go to the customer service to replace the backup power.

Enha! Replace the backup power! I didn't think that passing by could solve my own problems. Oops, I just don't know if it's okay?

3100 can't be solved, 7610 can be replaced with backup power.

Several Nokia phones are like this! There is no way! You only have patience! Or take it to customer service to fix it! But I don't think it's necessary! It's time to change the battery quickly!

His capacitance is a little small, tell you how I can change the battery without adjusting the time (provided you have two batteries).

Open the back cover, lift the bottom of the battery on the machine slightly (not too high), put the battery to be replaced under the dead battery, and put the new battery in it while removing him, during which the time must not exceed 5 seconds, when the machine is turned on, you can see China Mobile Unicom smoothly, without adjusting the time.

You can go and give it a try!

Several Nokia models are like this, and I guess there is no other way around this when I was on page 7610.

There's no other way to do this, this is a disadvantage of Nokia, you can do it without resetting it in five seconds, I make mobile phones, and I can't do anything about it.

Oh, yes. My phone is also that model. It's really troublesome.

The reason is. This early 3 series machine did not have enough capacitors.

After the power is turned off, it cannot be maintained for more than 10 seconds.

So, unless you're a master, change the capacitor.

Otherwise. Let's change my phone.

Just replace the battery in 5 seconds!

My phone is also this model, and I don't need to reset the time to put the battery back in five seconds.

In fact, this problem is a common problem of Nokia machines, you can use the time of the mobile phone to automatically update to restore the time that was reset without setting the time yourself.

Step 1: The battery is removed, the time is reset, and the screen that lets you set the time appears when the power is turned on. Step 2:

The last option in Settings - Phone - Date & Time: Automatically update the time and set it to "on".

Step 3: Settings - Connection Functions - Manage Settings - Packet Data - Packet Data Connection, set it to "when available".

Step 4: At this time, the time will be automatically updated to the current time, done.

Hello landlord, software problem, not to say Feixin and mobile phone rush.

Suddenly, but Feixin and your other software rush.

Suddenly, since some software is not available, it is recommended that you reinstall the grid machine and remember to back it up

Also, there is no harm in the lattice machine! Rest assured

First soft grid, not good and then hard grid

Some ways to get a Nokia soft lattice machine:

1.Initial recovery.

Load it from your phone's ROM. ini file, but at the same time can retain user data.

2.Full recovery.

Completely erase the data in the C drive. All user-stored data and applications are lost, and default system files are written. With both methods, your phone will ask you if you want to confirm it and ask you to enter a security code.

The default is 12345).Files and applications on the e-drive (memory card) will not be affected.

symbian

The above mobile phones can also be hard in this way: the method is to turn off the phone first, and then press and hold the dial key, "key," when turning it on

key to turn on the power until".

The word nokia appears (you can't release any of the keys during this process). Wait a few seconds and release the above buttons. After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen.

There are many reasons why the phone is turned on and turned off, and the last possible thing is that the phone is out of battery.

1. The reasons why the phone turns off when it is turned on are: the phone is out of battery, the system file is wrong, and the battery is loose.

2. If the phone is out of battery, it is recommended to fully charge it first and try again.

3. If it is a system error, you can try to format the phone, or flash it.

4. The battery is loose, and it is recommended to replace the battery.

Note: Please back up the file when the link is formatted. Flashing is risky, please think again.