I use Cisco s network equipment 8 16 channel Hikvision video recorders fixed IP how to achieve remot

First of all, the transmission port set in the video recording is guaranteed to be a different port number;

Then set the http port (only one needs to be mapped) and the transmission port in the router; If necessary, it is necessary to set up a streaming server;

On the Internet, use the domain name or IP to add the HTTP port to access the web interface, and select different transmission ports to access different video recorders.

It is recommended to use the client to receive centrally.

Good luck! <>

Today's routers generally don't support so many ports**. It is recommended that you install a set of software, Hikvision IVMS-5000 or IVMS-7000, which is a centralized monitoring management platform, installed with a server or computer, and only needs a few ports to this server or DMZ to this server in the router.

If your router can support 16 ports**, here's another way for you.

You only need to set the IP address and port of the recorder, such as the IP address of the first recorder, the HTTP port is 80, the port is 8000, the IP address of the second recorder is used, the HTTP port is 81, and the port is 8001......And so on. Then set the port** in the router, and put the corresponding port** to the IP address of the corresponding recorder, such as 80 and 8000**, and 81 and 8001** to ......When accessing the external network, you can use your fixed IP address + the corresponding port to access the corresponding DVR, for example, if you want to access the second video recorder, use IE to browse: 81

If you use the client, add the device-ip address, port8001-username-admin-password12345, add other recorders only the port is different, and everything else is the same.

An open web port defaults to 80 You change it to 81 so as not to be occupied, and then the service ports are opened one by one Suppose 1 is 8001, 2 is 8002, 3 is 8003, and the router does the mapping For example, (1) web port: 81 Service port: 8001 (2) Service port:

8002 (3) Service Port: 8001 That's it.

When you open it, you will http: domain name: 81 Go to the login screen To log in to 1 then port 8001 to 2 port 8002 and so on.

If you are a new product of Hikvision, open the 554 port again.

This is the same problem I had with Dahua video recorder before, your problem is similar, but the port used is different.

First of all, if the extranet computer can connect to the intranet, it is necessary to open the intranet mapping.

Then operate on the intranet computer, which is connected to Hikvision's web settings. Open the port,

Generally, the video recorder is equipped with PPPoE or DDNS:

You set PPPoE or DDNS inside the recorder

If your video recorder does not have the above settings, please buy a router to do port mapping, and then apply for a domain name configuration in the router, and let your router do pppoe,

First operate the video recorder, and then operate the mobile phone, a few simple steps to achieve the first remote monitoring, no matter where you are in the world, as long as there is the Internet, you can watch the monitoring.

See what model you CS-D1 series scan directly with your mobile phone.

7800H-SNH series Look.

If he is directly connected to the DVR with optical fiber, it will be easy, and he can directly fill in the IP to the DVR, and he can access it remotely.

Change the IP of the DVR to the fixed IP of the optical fiber, and then make a port mapping for it. Browse through IE.

I'm also engaged in monitoring, but I haven't done it remotely, ask here, it's better to find the manufacturer after-sales. It's true.

If the hard disk capacity of the two video recorders is the same, it is best to divide it evenly, so that the video storage time is basically the same, and there will be no situation that the video recording time is long and the time is short, if the hard disk capacity is not the same, then the large capacity can be connected to two more.

1) First of all, make sure that the cat, router, and computer are connected to the Internet normally.

The computer can automatically obtain the IP address, or it can be configured with a fixed private address, for example.

2) The DVR is configured with a fixed IP address, such as a mask gateway, which cannot be obtained automatically (unless Telecom gives you a fixed public address).

3) Do port binding on the router, such as 8000

804) Apply for dynamic domain name resolution, DDNS on the router, and refer to relevant materials for details.

5) Enter the dynamic domain name of the application from IE or configure it on the client.

Note: Different brands of video recorders are slightly different, for example, some models of Hikvision can use Hikvision DDNS, Hanbang also has its own domain name server, and Zhongwei has a powerful cloud view pass (which can automatically obtain intranet IP).

If you have a fixed public IP address, you do not need a dynamic domain name.

1. Apply for telecom IP, account and password, etc.; 2. Set up the router according to the account password; 3. Remote monitoring through the corresponding software;

This is complicated, look at the DVR instructions.