The old house is retrofitted with heating, which heating method is used to see the pipes on the wall

When the renovated house is renovated for heating, the skirting heater has the incomparable advantages of ordinary wall-mounted radiators and floor heating. Because the space behind the skirting heating can be arranged with 2 aluminum-plastic pipes with an outer diameter of 20, therefore, when the surface is installed, as long as the original wooden baseboard or tile baseboard is removed, and then the baseboard can be installed, the heating supervisor can walk along the back of the baseboard heating, and the unsightly pipes can not be seen on the wall at all, not only the heating effect is the best, but also does not affect the original decoration, it is the best surface-mounted heating equipment.

The old house is equipped with silver house skirting heating, and the heating system pipes are hidden behind.

The old house is installed with a temperature control valve in each room to realize the temperature control in the sub-room<> and the hardcover room is under construction.

<> real picture of the hardcover room after installing the silver house skirting and heating.

There are two ways to heat the old house to renovate the heating, and the pipes are not visible on the wall. The first is to use floor heating and heating. The second is to use wall-mounted radiators for heating. The radiator heating method requires slotted pipes in the floor and wall. You can choose according to the room type and needs.

The room is redecorated, and it is best to replace the heating line with a new type of PPR steady state pipe and bury it. Another: If it is a cast iron radiator, it is best to replace it with a new color radiator, which is of great benefit to the room decoration style and collocation.

1. If you want to re-apply the floor tiles, after breaking the ground, bury the heating pipes into the ground. 2. If the ground is not newly attached to the floor tiles (do not smash the ground), you can make a groove in the wall and bury the heating pipe in it. 3. If you still use the old iron pipeline, you can remove rust and paint it with anti-rust paint, and then brush it with paint that matches the color of the decoration style.

Heating has been the preserve of the North for the past few years, although there is state heating. However, with the development of the economy, families with more sufficient funds in the south have also begun to set up heating, some of which can be installed before decoration to achieve the most beautiful effect, but some families need to consider how to hide the heating pipe due to the installation of heating after decoration. That is to say, don't let this kind of celebrity affect the overall decoration effect.

Then the heating pipe is the famous pipe. When installing heating pipes, try not to let them through the living room as much as possible.

Because of the large area of the living room, it is a place for family leisure and entertainment. The pipes passing through the living room are not only unsightly, but there are also many furniture and appliances in the living room. Add to that the variety of heating pipes, and it's hard to think of that messy picture.

If you have to install it, you can choose to put it behind the sofa and place it along the kick. Choose a relatively secluded location in the room, when installing the heater, the pipes can choose the layout on the ceiling, it is difficult to see the traces of the pipes, you can choose to place the pipes behind the door, and you can choose to walk on the door when you need to pass through the door.

Choose the same color as the wall for pipes, for some unavoidable pipes and heaters. You can choose the heater to have the same pipe material and wall color as much as possible. If the wall is white, then the choice of white for the pipe is less obvious.

Choose the appropriate heating pipe material, and everyone knows that the hot expansion cold shaft. When installing pipes in hidden areas, pipes with a small coefficient of expansion should be selected. Because, once the pipe with a large expansion coefficient is used, it is difficult to hide the pipe once it is expanded, and the pipe must be clamped tightly together when fixing the pipe, and it must be fixed as fully as possible to avoid falling.

If you want to cover the unsightly heating pipes, you can use wooden heaters to cover the storage cabinets to shield, which can not only make the house decoration more beautiful, but also increase storage and improve practicality.

I think it's important to wrap the pipes in wood so that they look neat and tidy in the home, and they don't look very unsightly.

When decorating, you can use the way of wrapping to wrap the pipe, so that the advertisement will not look very eye-catching, and you can also design some other decoration methods.

If you want to renovate or renovate an old house, you must find a professional decorator to decorate it. Then just talk to them about some of your own suggestions.

Summary. Hello, glad to answer for you. Netizens in the north are no strangers. The heating pipe will become old and beautiful after being used for a long time, which will affect the beauty of the whole house. Therefore, many families will choose to modify the heating pipes.

There are many heating pipes on the top floor of old houses in the north, how to decorate them to make the pipes look less eye-catching?

Hello, glad to answer for you. Netizens in the north are no strangers. The heating pipe will become old and beautiful after being used for a long time, which will affect the beauty of the whole house. Therefore, many families will choose to modify the heating pipes.

Otherwise, make a cabinet to wrap up the ceiling, make a circle of light pools, and sit in the cabinet in the kitchen. Make a wall cabinet in the bedroom, change the heating pipes, or replace it with a particularly good-looking one, these can be changed.

Nowadays, most people will choose to renovate their old houses in order to improve their living conditions. Then when renovating the house, we should also consider the problem of dismantling and replacing the radiator, and below, I will introduce to you the matters that need to be paid attention to in the renovation of the radiator in the old house!

In the case of district heating, the construction time should be considered. If the heating time is constructed, it is easy to lead to water seepage safety accidents, cause unnecessary trouble to the family, and at the same time endanger normal life. Generally speaking, radiators are retrofitted during non-heating hours, i.e. before heating.

For the integrated heating of the home, the radiator renovation working time is free, and it is proposed in spring and summer, because there are few assembly customers, which can ensure the quality of the transformation.

Considering the actual effect of heating, it should be placed in an area with strong cold radiation. For example, living balconies, under windows, and side walls of floor-to-ceiling glass windows.

In the construction of radiators, water must not seepage. After the installation of the radiator is completed, it is confirmed that there is no leakage after the stamping processing test, and it can be connected with the original pipe. Considering the difficulty factor, there is no need to change the position. It is very inconvenient to go to the next-door neighbor for construction.

At this stage, radiator materials are steel radiators and copper and aluminum composite radiators are favored by customers, and the prices of new radiators are different.

At this stage, there are three kinds of raw materials for heating pipes: aluminum-plastic pipes, PPR pipes and PB pipes. Galvanized pipes are easy to rust so they are advocated, and the general family uses aluminum-plastic pipes, aluminum-plastic pipes with volume, durable, easy to assemble, and are very suitable for home assembly radiator applications.

The above is a question of "what are the precautions for the renovation of the radiator of the old house, and how to deal with the pipeline?" I hope it can help you.

1. Choose the right time to arrange the radiator renovation construction.

In the case of central heating, the construction time needs to be considered. If the construction is carried out during the heating period, it is easy to cause water leakage accidents, bring unnecessary losses to the family, and affect normal life at the same time.

Generally speaking, heating retrofits are made during non-heating periods, i.e. before heating. For independent heating households, the heating transformation time is free, and it is recommended that the quality of the renovation can be guaranteed in spring and summer, due to the small number of installation users.

Second, the selection of radiator installation location.

From the perspective of heating effect, it should be placed in a place with strong cold radiation. For example, balconies, under windows, on the side walls of floor-to-ceiling windows.

The decoration of the old house can only be installed with surface-mounted radiators, I think how to arrange this, you can find a professional HVAC company to combine your room type to do a positioning, try to be more beautiful!

German Wolev wall-hung boiler home heating Anhui General **-Anhui Hong Jinxiang reminds the design principles of surface-mounted radiators.

The user adopts the installation method of surface-mounted radiators, and the following principles need to be adhered to in order to achieve the dual effect of practicality and decoration:

1.Try to avoid heating pipes passing through the living room, if it is really unavoidable, horizontal pipes can be arranged along the baseboard; The pipes up and down should be arranged in the corners of the wall next to the window, and the curtains should be used to cover them.

2.When the heating pipe needs to pass through the door of the room, it should be walked through the door, not slotted from below, so as not to damage the floor.

3.When the heating pipe is arranged in the room, it should be set at the back of the door, which saves indoor space and facilitates daily life.

4.Heating ducts should be placed behind movable furniture away from fixed furniture.

5.Radiator pipes and fixtures should be consistent with the color of the wall to reduce the feeling of obtrusion.

The floor heating module is time-saving and labor-saving, and the quality of the coagulation power floor heating is very good, and it looks good.

Judging from your **, it is definitely unreasonable, but it is also possible that your ** drawing is different from the reality.

Pay attention to a few questions.

1. Is there a problem with the water bag of the stove, and the heat runs away along the chimney?

2. To eliminate the above reasons, it depends on whether your water tank is boiling when the stove is very hot.

If there is a boiling phenomenon and the radiator is not very hot, it means that there is a problem with the installation of the pipes, and the resistance is too large, which cannot effectively send the heat from the stove to the radiators. If there is a phenomenon of boiling the pot, but the radiators are very hot, it means that the number of radiators is too small, and the radiators cannot transfer heat to the air in a room in time.

3. If the heat runs down the chimney and there is no boiling phenomenon, then it can only be said that your place is too cold, so change to a larger stove.

How to get heating pipes for old house decoration? For many old houses, the location and layout of the heating pipes are relatively old, and the new house needs to be renovated, but how to carry out the renovation process? The following is described in detail below.

1. Locate the location of the pipeline.

First of all, it is necessary to locate the location of the heating pipeline, and carry out on-site investigation according to the transformation plan and design drawing, which can be transformed with the existing structure, and pay attention to protecting the existing pipelines and other facilities and equipment during the survey process to ensure that the use of other equipment will not be affected after the transformation is completed.

2. Cut the pipe.

According to the design drawings, the determined transformation plan will be grooved and cut the pipeline, and all the pipes should be leveled after cutting, and the uneven parts such as burrs and fragments should be removed to avoid pipeline leakage.

3. Thermal insulation of heating pipes.

After the renovation is completed, the pipes that have been arranged should be insulated to ensure the heating effect. There are a variety of heating pipe insulation materials on the market, so you can choose the material that best suits your needs.

4. Install valves and control devices.

After the transformation is completed, valves and control devices should be installed to facilitate control during use, and valves of appropriate specifications should be selected to ensure that the pipelines are not connected. After installation, it is necessary to carry out water testing or testing to check whether there is leakage in the pipeline, and the inspection time will be selected as long as possible to ensure the effect.

5. Decorate the pipe.

The last step of decorating the pipeline is to consider the beauty of the pipe, and you can choose to buy the formaldehyde decorative sleeve of the pipe for decoration. This can greatly improve the integration of the whole room.

The above is a detailed introduction to how to get the heating pipe for the decoration of the old house, I hope it will be helpful to all the decoration carriers.

If you want to see the pipeline, you can only go underground or make a ditch on the wall, put the pipeline into the ditch, and smooth the surface with plaster.