-
It depends on the materials you use for modification, in which store to modify, if it is a professional shop, doors, surrounding, headlights, wheel bell exhaust system, chassis or something, the total should be about 60,000, this modified car I have seen in the Zhuhai field, very mysterious, very stylish!! Hopefully LZ can get it... I'm a car enthusiast and have time to communicate!!
-
Summary. Dear car owners, hello, I am a car master who has been repairing cars for 15 years, and I am happy to answer for you. According to what you described.
How much does it cost to modify Bora, this is really bad, because the modification is bottomless, and it can be changed up to 100,000 200,000, it depends on how you want to change, simply change an appearance, or change it to power. If you simply change the appearance, add a surrounding, change a wheel tire, then generally 20,000 to 30,000 can generally be solved, and then take a look at the whole car, and the side wall will also be one, so it will cry a little, and then the exhaust pipe will also be done here, generally two or three hundred thousand can be done.
How much does it cost to modify the old Bora Cooler
Dear car owner, you are a good one, I am a car master who has been repairing cars for 15 years, and I am happy to answer for you. According to what you described. How much does it cost to modify Bora, it's really not good to say this, because the modification is bottomless, and it can be changed up to 100,000 or 200,000, it depends on how you want to change it.
If you simply change the appearance, add a surrounding, change a wheel tire, then generally 20,000 to 30,000 can generally be solved, and then take a look at the whole car, and the side wall will also be one, so it will cry a little, and then the exhaust pipe will also be done here, generally two or three hundred thousand can be done.
The budget is less than 20,000 yuan.
The power is a bit small.
Is there any classic scheme.
If you want to change to power, then your budget of 20,000 yuan is not enough power, and you must not be able to move 20,000 yuan to get the budget, that is, to change the appearance, for example, change 4 wheel tires, and then add a side wall. Front and rear finches are mounted.
It's the interior exterior wheel lights.
If you want to change to the headlights, then this ** is probably not enough, or your lights are cheaper, that's okay.
Is there any specific plan?
Didn't we already tell you about the specific plan? Because if you want to say so much detail, this must be to go to the physical store to see the car condition with the master of the physical store, well, I will give you pants Sun Jing's plan suggestion is to say that there are two side surrounds, and then the front and back surrounds, and then a set of exhaust, and then a set of steel rim wheels and Kai imitation hubs.
-
The new car has changed its calm exterior and interior, the design language has become young and sporty, and the words "Bora" and "allnewbora" are also printed on the license plate; In addition, the EA211 series of naturally aspirated and turbocharged engines replaced the previous EA111 series, and the power performance has been improved; It is mated to a five-speed manual, a six-speed Tiptronic automatic manual transmission and a seven-speed DSG dual-clutch transmission.
The exterior styling of the new Bora can be described as a new look, with more three-dimensional and impactful line designs giving the vehicle a more youthful and energetic sporty atmosphere, which is also closer to the style of family members such as Passat and Magotan . The entire front face has been changed, with the grille area further enlarged, but only the middle grille has chrome trim that connects to the inside of the headlights. The headlamps with a chamfered design include a combination of U-shaped LED daytime running lights and a combination of lenses for headlights.
The contours of the doors and windows in the C-pillar section have also been changed, and the design of the extended chamfers has been adopted to increase the rear window area and reduce the blind spot. The "V" shape design of the rear echoes the front face, and the "E" shape LED taillights with multiple fold line designs are also a highlight of the tail design.
The interior is the same as the current model, with only the steering wheel, air vents and button layout in the center console adjusted. The high-end model is equipped with an inch central control screen, the area is not large, and the official information says that there has been a great improvement in touch and sensitivity. The seat design with a mix of velvet materials and two-tone stitching can realize the folding of the backrest of 4 6, which can further increase the luggage compartment space of 490L after folding.
The exterior and interior are evidenced by the pictures, so there is no need to talk about it.
The length, width and height of the facelifted Bora are 4562*1793*1468 mm, and the wheelbase is 2614 mm, compared with the current model, the length, width and height have increased by 1 mm respectively, and the wheelbase has only increased by 4 mm. Although the changes in the data are minor, the entire body profile and structure have been changed, the most obvious part is the door and window profile of the C-pillar section, which is not exactly the same as the current model. According to official information, compared with the previous generation model, the actual interior seating space of the facelifted Bora has been significantly improved, and its front and rear legroom have increased by up to 20mm.
In terms of power, the facelifted Bora (parameter |**) Instead of EA111 series engines, EA211 series naturally aspirated and turbocharged engines will be used. The maximum power of the engine is 110 kW and the peak torque is 250 Nm, which is 14 kW more powerful and 30 Nm more torque than the current model. The naturally aspirated engine has a maximum power of 81 kW and a maximum torque of 155 torque, while the EA111 series engine has a maximum power of 77 kW and 155 Nm.
As for the transmission, the new car is offered with a five-speed manual, a six-speed automatic manual and a seven-speed DSG dual-clutch transmission.
Hello, 06 Bora standard configuration of the new car ** in the 10,000 yuan. According to the model you described, there is no major accident in such a car, no major collision, the engine is running normally, and the procedures are complete, the car is currently about 10,000 yuan in the comprehensive market, for reference only. I don't know what information you want to see about this car, but it is recommended that you can go to the official company of the brand**, maybe there will be the information you need, thank you for your attention and trust in Aipu used cars.
1. The heating valve is faulty.
The heating valve is actually an electronically controlled valve, which is installed between the inlet pipe of the heating water tank and the small circulation pipeline of the engine, and the opening of the valve is controlled by the air conditioning computer, so as to control the flow of coolant into the heating water tank, so as to achieve the purpose of more accurate control of the temperature of the heating air conditioner. >>>More
If the vehicle breaks down during driving, it is recommended to go to the repair shop for inspection and maintenance in time to avoid affecting the overall safety performance of the vehicle.
Hello, first of all, confirm whether the tire pressure is normal, if the tire pressure is normal, through the tire pressure monitoring button to reset the tire pressure. >>>More
I looked at the hand-drawn Lynk & Co 03 on the Internet, and referred to Lynk & Co, I think Lynk & Co 03 is more fashionable, Lynk & Co 03 maintains a family-style design style, and the headlights and grid bars are split designed, which is very distinctive. The exterior design of Bora is relatively conservative, decent, and lacks fashion elements, which is inferior to the Lynk & Co 03. The Lynk & Co 03 also has advantages in terms of technological design, and if I buy a car, I will choose the Lynk & Co 03