HOW TO CONNECT TWO COMPUTERS TO THE INTERNET WITH D LINK DI 504 ROUTER

That's the route I use, here's how it works::

1. Connect the network cable (both use a direct connection), and the incoming cat router routes two computers. (Note that the cat router is connected to the WAN port, and the router LAN port is connected to the computer).

2. Enter your land tour. (Take a look at the manual, what is the IP address, username and password of Lu You.) If the manual is gone, check it on the Internet.

For example, the IP of my unit's land tour is Then I enter it in the address bar of IE and then press enter, and the login dialog box will appear, and you can enter the land game by entering the user name and password.

3. Set up your extranet, which is WAN. (The options in different land tours are different, but the basic functions are the same, and you should be able to find them all if you look for them.) Find this option and fill in your adsl account and password in poppe.

4. Set your LAN IP, which is LAN. Or take me as an example,Since my land game's IP is So in order to facilitate my setting of the LAN IP is Of course,If you don't like it, you can change it to something else.,But after changing, you have to change the land game's IP to it.,If I want to set the LAN IP to Then I have to change the land game's IP to.。

Well, now that the LAN IP has been set, if you don't want to do any management to go online, then each computer can access the Internet as long as the network card automatically obtains the IP. If you also want to do some management of the computers in the LAN, then you need to set a fixed LAN IP address for each computer. If the LAN IP is set to then your computer's IP can be set to any number between 2 and 254, and each computer should not be the same, 1 is not your land gamer.

If the LAN IP is set, then the IP of the computer can be set.

1 What you said about the connection method of only 1 machine is equivalent to connecting a switch, and the data has not been **.

2 You need to plug the cat network cable into the waln port of the router, and then connect the LAN port below to the network cable to the 2 computers.

and set up the router on one of the computers.

It's roughly the IE input.

There should be a specific reference to the manual.

Please go to my space ** router settings for details!

Call bills come to me.

Whether it's to connect the line on the Moden to the WAN port and LAN port, there is no limit, as long as you see if the cat does not connect to the road oil, directly connect to the computer IP is, and then connect the road oil, set the IP to the same as the IP without the road oil.

1.Both wireless routers need to have bridging capabilities.

2.The wireless name and SSID used by the wireless router must be the same.

3.The wireless channel used by the wireless route must be the same.

4.Both routes have bridging mode WDS enabled, and the MAC addresses of each other's routes are filled in with each other.

5.The wireless encryption mode and password of the wireless route must be the same.

6.It is best to use wireless router products from the same manufacturer, or even the same model, to avoid compatibility problems.

Configuration of Router 1:

2. In the WAN port settings, set the current Internet access mode, in this case PPPoE dial-up.

3. Set the basic information of the wireless, change the default SSID to AP1, enable the bridge function, and enter the wireless MAC address of AP2 in the box below.

Router 4, 1 keeps DHCP enabled.

Configuration of Router 2:

2. In the LAN port settings, change the LAN port IP to :, and then click "Save".

3. The WAN port setting remains the default and unchanged.

4. In the basic settings of "Wireless Parameters", change the SSID to AP2, enable the Bridge function, and fill in the MAC address of AP1 in the box below.

5. In the DHCP service settings, router 2 disables the DHCP service. Then click "Save".

Bridging? What features do you want to achieve? Maybe I can help you.

1. Make the correct connection according to the manual.

Line: Signal splitter to cat routerwan router lan computer network card.

Note: To use the 568b method to make a cross-twisted pair, not 568a

2. Set the address of the computer network card to be automatically obtained (new router, if it is an old router, the auto-allocation function may be turned off, so it can be set to fixed.)

3. Turn on the computer and type ping in the running to test whether the connection is normal.

Note: The premise is to make sure that the NIC is working properly, and the test method is ping

4. Open IE, enter, the login window appears, the account is admin, the password is empty, and enter the management interface.

5. Choose the correct connection method according to the actual situation, the cell LAN is generally a fixed IP, some may be dynamic IP, if it is ADSL, select PPPoE, fill in the correct relevant information, and it will be done.

Note: Some of them may already be bound to your Mac, so you need to clone them.

6. After saving, you can go to the system status to check whether it can be connected normally.

What's so good to set up the routing, wiring, right? The network cable that came out of the cat is connected to the WAN socket,The network cable of the computer is connected to other sockets,As for its software settings,There are generally in the manual,The main thing is to access it by entering the IP of the route,The IP of the general route is nothing more than that:Or,It's in the browser,You open the address bar of the web page to enter it,Other specific settings look at it yourself,It's all according to the prompt。

First of all, the connection should be correct, **wire connection separator in, splitter modem connected to moedm, phone connected**, network cable connected to modem to connect to the router wan port, router lan connected to the computer, turn on the power, and finish. You can refer to the manual.

Enter in the browser, set the username admin by default, the password is empty, enter the web interface, click Home - WAN - PPPoe - Dynamic PPPoe - Enter your ADSL username and password in PPPoe username and password - Online mode - Click Auto Online - Execute, Done.

Point system status lan side has intranet information such as:

LAN side.

MAC address 00:00:21:47:E1:A6IP address.

Subnet mask. DHCP Server activation.

The WAN side has complete IP information, which is randomly generated, such as:

MAC address 00:E0:4C:DF:BF:37 PPPoE connection.

IP address.

Subnet mask. Gateway DNS server.

If the connection is normal, the above information is available after setting up the restart for a few minutes, which proves that the setting is successful and can be used.

After the router is powered on, connect any LAN port of the router and the computer with a network cable, connect the WAN port of the router to the cat for Internet access, open the browser and enter the computer, the password and user name are admin or the password is left blank, after entering the configuration interface, there is a setting wizard button on the home page, click the button to do it all the way, pay attention to choose the right way to access the Internet, for example, telecom ADSL is PPPOE Internet access, wired communication is dynamic IP, etc., pay attention to case sensitivity when filling in the password, After completing the setup wizard, the router will restart, and the computer will be able to access the Internet as soon as it is launched.

The default gateway refers to the way you want to access the network, you remove the default gateway, configure the IP at random and connect to the IP of a network segment.

Let's set your IP to get it automatically, then just follow the instructions! Or press your router to factory settings to reset your routers!

Reset is also restricted!! The route is broken, right!!