The wifi at home can be on, and the signal is also very good, but it just can t open the web page, i

It's just that the network is not connected properly. 1.The wireless router is not set up.

2.The cat and the router are not connected properly. 3.

Broadband and cat are not well connected. 4.The cat is broken.

5.Whether there is an error in the browser item (this may be very small). The workaround is:

First of all, connect the broadband and modem, router, and computer correctly. Then follow the steps to set up the wireless router correctly, especially the password link of the broadband ** provider and the default password of the router must not be wrong, otherwise you will not be able to set up the router well. If it's not all correct, it's a problem with the cat or the broadband ** provider, you can consult the customer service of the artificial station.

The wifi signal is very good, which means that the router must be good and is also working, but you didn't get it right, and it is useless.

Yes. There is also the possibility that there is a problem with the host program.

Go online to check whether the signal light of the cat is working normally, confirm that the external network connection is correct, and then set up the wireless router again.

Maybe the network is disconnected, unplug the cat and router power and restart.

It doesn't have to be your router's problem, the LAN has the Internet or not, it should be that the Internet is not tuned.

Check to see if there is a problem with the computer browser, or maybe there is a problem with the system.

You can restart the router or reset the Wi-Fi settings. The premise is that the router must be good.

It's a service problem, just wait.

Please confirm whether the wifi is normal (you can restart the router and wireless wifi or reset the settings first), and then call ** to customer service for consultation.

Mine is also often encountered, just restart the router!

Are you sure that the broadband and password in the router are set correctly?

I don't understand either, maybe it's a problem with the settings.

Let's see if you can connect directly to the computer with a network cable.

You ask one person to do the work of four people, and the machine can't stand it. Even if you can connect, it's not much faster than a snail.

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

In fact, there are many reasons why the wifi signal is very good and you can't connect, you can rule them out one by one according to the above situation, if you can't connect to it, it's a network problem.

There are several reasons why you can't connect to the internet when you connect to wifi

1. The wifi itself is a problem, and the wifi may not be connected to the world, resulting in the inability to access the Internet;

2. Router problems, the router may be overheated or damaged;

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, which causes some computers to be unable to connect to the Internet.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself;

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet;

3. Contact the customer service of Limb Broadband to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection.

Even the router can be connected to the wifi signal is also strong, but it just can't get on the network solution:

Method 1: Dial-up failure due to line connection problems.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Method 2: No router dial-up is set.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Use Q account name |Consult TA for professional computer maintenance.

Specialty: Computers.

Your network operator may bind your account to the MAC address of the network card of which computer you can access the Internet, first insert the network cable into the dormitory into any LAN port of the WAN port of the router to connect to the computer where you can access the Internet, enter the router login address on the back of your router in the browser, enter the router login account and password, click the router, set up the wizard, click Next, automatically get the IP address, click Complete, then click Network Parameters, MAC address clone, click Clone MAC address, Click Save.

This is actually to deceive your network operator that your computer is surfing the Internet, because the network card address of the router is the same as the network card address of your current computer.

Enable DHCP service: (that is, the function of automatically assigning the output IP of the router).

Enable the wireless Wi-Fi, set the router encryption mode, and set the wireless routing password.

And then in the - interface settings > LAN settings > IP address set to "?Save, reboot the router (?) is between 2 and 254).

Then log in to the router again:?The password and account number are your original router, login password and account number.

Let's take a look at the system status of the router.

The router has a strong wireless signal, which only means that the router has turned on the wireless function and has a high transmitting power, and the router needs to be properly connected to the Internet and set up to connect to the Internet.

1. The wifi can be connected, which can only prove that the wifi connection is not broken, but it does not prove that the wifi is connected to the Internet.

2. Please log in to the WiFi and turn on the connection status of the WAN port of the WiFi. If it shows connected, reboot next. Check whether the WAN connection is successful and obtain the IP address and DNS.

If the WAN shows Connected, Not Connected, or IP and DNS are displayed, it means that the WAN is not connected to the Internet.

3. If the WAN port is not connected, please check the connection settings. You can also re-initialize the wifi and reset it.

Hello, the router wifi has a signal but can't get on, and the limited access rights are generally caused by the following reasons.

1. The router is dead, just restart the router.

2. If the broadband is in arrears, or the signal line has no signal, it is directly connected to the network cable by the telecom operator, and then dialed or set a fixed IP to see if it can access the Internet.

3. Whether it is intercepted by LAN software or administrator, for example, if you surf the Internet through a public route, it is likely to be caused by someone else's computer attack, and the solution to this situation can only be discussed with the administrator.

4. The router was accidentally reset, just reconfigure it 5. The computer is faulty, just restart it.

The phone shows that you want to change the root permissions, but the easiest way is to reinstall an upgradeable system, there is a special tutorial on the Internet, it is very simple.