How is the air conditioner billed and how is the air conditioning cost calculated?

Is it that in a certain period of time, the lower the temperature, the greater the power consumption Answer: Yes, the lower the temperature setting, the greater the power consumption. Because the temperature setting is low, the compressor will run for a longer period of time, and the power consumption will definitely be more.

Or what?? Therefore, to calculate the power consumption, the rated power (refrigeration power) of the air conditioner compressor running time = kWh (kWh), for example: the cooling power of the 1P machine is about 700W, and if the compressor runs for 1 hour, kW 1 hour = kWh (kWh).

The power consumption of the air conditioner is set in a certain period of time, the lower the temperature value is set The greater the power consumption, it is a fact that because each person's adaptation temperature is different, according to the setting standard of air conditioning operation, the best adaptation temperature is 25-26 degrees, which is also the standard daily electricity consumption billing standard for air conditioning operation. It can only be said that in order to save electricity, you can start from the standard 25 degrees, and save 6-7% of energy consumption when you increase it by one degree.

It can also be calculated in this way: in units of ten hours, when the air conditioner is set to 24-26 degrees, it is more accurate to calculate the total power consumption according to the rated power of the air conditioner multiplied by ten hours equal to the total power consumption, and then 80% of the total power consumption, and the total power consumption is reduced to 70% for every five hours of running time. The above is only a more accurate reference number.

The factors that are only for the operation of the air conditioner are too reviewed, such as the climate, the tightness of the room and the size of the space...

Billing begins when the system provides cooling (or heating) and the consumer motorized valve is open and the consumer fan coil unit is operating effectively. The effective equivalent time used by the user is: t total = k period k coil (k high t high + k medium t medium + k low t low).

Description: 1) T total: The total equivalent time of the fan coil unit, in h.

2) K coil: the refrigeration heating plate of each coil.

3) K high: the gear coefficient of the high-grade fan coil unit.

4) K medium: the gear coefficient of the middle range of the fan coil unit.

5) K low: The gear coefficient of the low gear of the fan coil unit.

6) T height: the effective service time of the fan coil unit of high grade.

7) Medium: the effective service time of the middle range of the fan coil unit.

8) T low: the effective service time of the fan coil unit in low gear.

9) K period: time period coefficient.

Look at the horsepower of the air conditioner and the cooling capacity. 1 horsepower of air conditioner refers to the cooling capacity of roughly 2000 kcal, converted into SI units should be multiplied, so the refrigeration capacity of 1 horse should be 2324 (W), where W (watt) means the cooling capacity, then the horsepower should be 2000 kcal, and so on.

Based on this situation, the number of horsepower and cooling capacity of the air conditioner can be roughly determined. Under normal circumstances, 2200W-2600W can be called 1 horse, and 3200W-3600W can be called horse.

There should also be no obstacles in front of the indoor unit, otherwise the air outlet will be affected.

When the air conditioner is first running, the selector switch can be adjusted to high speed for rapid cooling, and then to medium and low speed when the temperature drops.

Ventilation switches can be used for ventilation of window air conditioners, but the ventilation time is not more than 15 minutes, too much dust accumulation on the outdoor radiator of the air conditioner will reduce the efficiency, and the outdoor radiator should be checked and cleaned regularly (after a power failure, it can be blown with compressed air).

The output power (i.e., refrigeration capacity) of 1P air conditioner can reach 2500W, but the power consumption is by no means the input power (i.e., power consumption) of the air conditioner is 850W-1000W per hour, and the electricity cost of 1P air conditioner for 1 hour is only about yuan.

The average hourly power consumption of the three-horse inverter air conditioner is generally about 2 degrees, and the heating is between 2-5 degrees. Specifically, it depends on various factors, such as the size of the room and the quality of sealing and thermal insulation conditions, the outdoor ambient temperature and the degree of indoor temperature regulation, which have a greater impact on the size of power consumption.

Air conditioner size. The national standard stipulates that the size of the room air conditioner is marked according to the refrigeration capacity parameter. For example, an air conditioner with a model of KFR-22GW, where the number "22" means that the air conditioner has a cooling capacity of 2200W, which can be referred to as "Type 22". However, many people do not call it that, but call it as many "horses", but in fact, it is completely wrong to call them "horses".

"Horsepower" is a unit of power, 1 horsepower (horsepower) = 735w (watts), in the past, in Japan, the oral name was called 735W air conditioner with input power 1 HP air conditioner, and the air conditioner with input power 1470W was called 2 HP air conditioner. However, due to the fact that the input power of the air conditioner is not necessarily just the whole horse, such as 1400W or 1600W, it is called 2 horses small and 2 horses respectively; Between 1 horse and 2 horses, it is called a horse, and so on.

This is a bit difficult to calculate, if you don't have an independent network billing system for the air conditioner, it must be several times higher than the electricity bill, and you can install a new air conditioner with such a large area in four or five years. Install a set of ** air conditioner, the total power of such a large area should be about 50kw in summer and about 75kw in winter. Use 12 hours per day.

Calculated per kilowatt-hour, 50 * 12 * yuan in summer, 4 months in summer, the cost is 190,000, and the cost of new air conditioning is about 100,000-120,000.

Open daily from 9 a.m. to 9 p.m. for a total of 12 hours; 30 days per month: 10,000 yuan;

Electricity cost How many kilowatt-hours of electricity per hour How much is one kilowatt-hour of electricity.

**Air conditioning billing methods are: electricity metering, time, and area.

1. Electricity metering type.

By measuring the electricity consumption at the end of the air conditioner, and then converting it into cooling capacity according to the electricity consumption, the air conditioning system is counted.

The total cooling capacity of each user is apportioned according to the proportion of the cooling capacity of each user.

2. Time-type.

Place the fan coil unit.

The three-speed switch, the power supply of the electric two-way valve are connected to the collector, the collector detects the two-way valve and the wind speed signal data uploaded to the computer monitoring system for analysis and processing, and the state time of each gear is accumulated, and the time is converted into the benchmark Kai boring time through the given time type coefficient, and the billing is carried out according to the approved **.

3. Area type.

Simply apportionment the cost of the air conditioning host (including water pumps, cooling area flattening towers, etc.) based on the usable area.

**Air Conditioner Billing System Features.

1. Billing function.

According to the data of meter reading and the setting of charging items, calculate the user's air conditioning usage fee, and output the bill and bill. The billing report can be customized according to user requirements, and the billing data can be exported to a variety of formats.

2. Real-time monitoring.

Timely and comprehensive monitoring of the user's usage, with a complete log query function, and alarm for faults.

3. Intelligent management.

Statistics on the utilization rate of air conditioners, you can draw the usage curve for a certain period of time and count the consumption of a certain period of time.

4. Integrated control.

Convenient and applicable batch operation, can realize parameter setting and modification, easy remote centralized control and other functions.

5. Billing during the Serge period.

According to the actual use of the building, according to different time periods, according to different ratios and bending coefficients, automatic meter reading and calculation of ** air conditioning usage fees.

Generally speaking, renting an air conditioner for a month is about 100 to 300 yuan. But I personally don't recommend you to rent an air conditioner, because the air conditioner itself is not expensive now, generally within 2000 yuan, and you need to pay a deposit of more than 1000 yuan to rent an air conditioner. On top of that, the rented air conditioner was old and broken.

Who will rent you a brand new air conditioner? If you still want to rent an air conditioner, you can go to a professional air conditioner rental**, or rent directly from the owner.

$100,300 a month. Oh, and there are differences in different regions**. There is also a deposit of $1,000,2,000.

Different regions. Different types of air conditioners. There is also a gap. Under normal circumstances, it is between 100 and 300 yuan a month. $500 is the most expensive. An additional deposit of $1,000,2,000 is required.

Hello, the calculation of the air conditioner electricity bill mainly depends on factors such as the power of the air conditioner, the time of use, and the price of electricity. Generally speaking, the more powerful the air conditioner, the higher the electricity bill; The longer you use it, the higher your electricity bill. In addition, there are differences in electricity prices in different regions, and the higher the electricity price, the higher the electricity bill.

The specific calculation method can refer to the following formula: electricity cost = air conditioning power usage time electricity price. For example, if the power of an air conditioner is kilowatts, the use time is 8 hours, and the electricity price is yuan kilowatt hours, then the electricity bill is yuan.

In addition, in order to save on the electricity bill of air conditioning, we can take measures such as choosing an air conditioner with a high energy efficiency level, maintaining ventilation in the room, and avoiding turning on electrical appliances in the air-conditioned room. Hope the above can help you.

**What are the charges for commercial refrigeration of air conditioners?

The charging standard for commercial refrigeration of air conditioners is mainly determined according to the power of air conditioning. If the power is large, the power consumption is also relatively high. Everyone should buy a better power-saving **Shang Chain Hu with air conditioner.

A: Yes, the lower the temperature setting, the greater the power consumption. Due to the low temperature setting, the compressor runs for a long time and consumes a lot of electricity.

It's not about the temperature. The longer you look at it, the more energy is used. a:

There are problems with temperature and time. The former one is clear. Or what?

Therefore, the calculation of electricity consumption is based on the rated power (refrigeration power) of the air conditioner Compressor running time = kWh (kWh), for example: the refrigeration power of 1P mechanism is about 700W, and the compressor runs for 1 hour, hour = kWh (kWh).

Look at the number of air conditioners and the amount of cooling. One unit of air conditioner refers to the cooling capacity of about 2,000 kcal, which is converted to SI units and multiplied. Therefore, the cooling capacity of a unit should be 2324 (W), where W (W) represents the cooling capacity, and the unit should be 2000 kcal, and so on.

Based on this situation, the number of air conditioners and the amount of cooling can be roughly determined. Generally, 2200w-2600w can be called 1,3200w-3600w. There should also be no obstacles in front of the indoor unit, otherwise it will affect the air outlet.

When the air conditioner is first running, the selector switch can be set to high speed for rapid cooling, and then set to medium and low speed when the temperature drops. Fuying open window air conditioners can be ventilated using ventilation switches, but the ventilation time is less than 15 minutes. Too much dust in the outdoor radiator of the air conditioner will reduce the efficiency, so the outdoor radiator should be checked and cleaned regularly (it can be cleaned with compressed air after a power failure).