How do I send bulk faxes? To manually send a fax

1. Before sending faxes, first check whether the fax machine has been connected to the power and whether there is enough fax paper in the fax machine.

2. Open the upper cover of the fax machine, and lay the text of the document to be transmitted face down at the input port.

3. Then pick up **, dial the fax destination**, and ask the other party to give a "signal that is allowed to be sent".

4. Wait for the other party to press the acceptance fax. After the button is operated, then the sender clicks the "Fax Start" button, and the fax machine starts working and starts sending faxes.

5. When the fax is being sent, there will be a squeaky sound, which is a normal phenomenon. During the sending process, the file to be sent will slowly move downwards and finally come out of the lower port of the fax machine, indicating that the fax was successfully sent.

6. At the same time when the fax is successfully sent, there is a receipt above the fax machine, which generally contains the **, location and other information of the fax.

Open the Start menu, click [Windows Attachments] - [Windows Fax & Scan] - [File] - [New] - [Fax], enter the recipient's name, the subject and content of the fax, and finally click [Send].

Put the documents that need to be faxed backwards into the fax machine with a balance on both sides. Dial the other party's fax, and press the confirmation button when you receive the signal.

Fax is sent out through the ** line, the computer is not good, there must be a fax machine.

You must have a fax machine, and the printer and fax options in the control panel are set after you install the fax machine.

Depressed: The drive is not so advanced now.

Dear, I am glad to answer for you, manually send a fax step to answer; 1. First of all, put the content to be faxed into the fax machine, of course, you must open the lid before here. 2. The general fax machine will prompt how to place the documents, and the fax machine we use is to face the text down (the general fax machine is like this). 3. Put the content to be faxed according to the prompts, and the content to be transmitted is downward!

4. Then it is dialing, there are two ways here, the number is not written down separately when the general fax is faxed, you can dial the number first. 5. Then press the monitoring button, which is equivalent to pressing the hands-free key of **, the fax will have a voiceover, or if you don't need the voice, you can directly lift the phone (in fact, you can dial the number first and then put the file to be transmitted, but you must grasp the speed, don't wait for the ** to connect the signal has been given, the content has not been put well, so it's bad, the general recommendation is to put the fax content first!) In short, as long as you make sure to put the file away before the ** is connected, there will be no problem.

6. Some fax machines are automatic, dial through and will directly give the fax signal, hear the piercing "drop" sound is a signal, generally this signal is continuous, "drop--- at this time press the "fax start" button, the fax will be automatically transmitted to the shouting pin, don't care! Orange 7, there is another kind of**fax together, the number dialed is the circle infiltration line someone answered first,**After answering, tell someone you want to send a fax, ask her to give you a fax signal, pay attention to it is also to wait until you hear the fax signal to remember the sound of "drip--- before you can press the "fax start" button to start transmitting.

1. Put the file in the file or stove of the fax machine, and the fax machine will suck the file into it a little bit, and automatically read the clarity of the dress, and the screen will appear clear. Note that the front side of the document must be facing down, otherwise the fax machine will not be able to scan the contents of the document.

2. To know the other party's fax number, call the other party's fax number, and hit **, confirm whether it is the other party, and press the signal key of the fax machine. After pressing the signal button, wait for the signal to be connected, pay attention to the screen of the fax machine when the signal is connected, and the word "connected" will appear.

Summary. Hello dear, the steps to manually send a fax are as follows:

Hello dear, the steps to manually send a fax are as follows:

1. First of all, you need to manually find the fax of Liang Sakura and Fang**. 2. Then, put the paper in the real machine. 3. After that, dial the number, you will hear a drop after dialing, click send.

Wen Song will be faxed over in a moment. (Note: If the other party's fax machine is not automatic, but manual.)

After the ** is connected, you should remind the other party to give a signal, and then click to send it after the other party gives the signal.