If the third party software is not installed, how can I check the IP address of the external connect

netstat -s

netstat -a

netstat -an

netstat

netstat -.And a lot of my own Internet checks).

Go into cmd and type netstat, and then both your and each other's IPs come out.

For XP users, you can use the "ipconfig" command to view the local IP address, open the "Command Prompt" window, and use the "ipconfig" command.

2.There is a "Local Connection" icon in the shape of a dual PC at the system tray, open the "Local Connection" window, switch to the "Support" option page, where you can see the address type, IP address, subnet mask and other information, click the "Details" button You can also see the MAC address, IP address, IP mask, default gateway, DHCP server, lease expiration, DNS server and so on of the network card.

Here's how to check it out:

1. Open the desktop of your computer and click the Windows Start icon in the lower right corner.

2. Then select "Devices & Printers" on the right.

3. Then select the printer you want to view on the page that opens.

4. Select the printer, then right-click and select "Printer Properties" in the list.

5. In the properties page that opens, click the "Port" menu above.

5. Click "Configure Port" on the port page.

6. You can view the printer's IP address in the open configuration port page.

1. Click the start icon in the lower right corner of the computer desktop.

2. Go to the computer start page and click on the Device and Printer options.

3. Enter the printer management page and select the printer you want to view the IP address.

4. Right-click on the printer and select the printer properties option.

5. Enter the printer properties page and click Port.

5. Select the port and click on the Configure Port option.

6. After clicking on the configuration port, you can see the printer's IP address.

1. On a Windows 7 computer, tap "Winkey" (key with Windows icon) + "R" on the keyboard to open the "Run" window;

2. Enter "cmd" (both upper and lower case) in the running window and click "OK";

3. After entering cmd, enter "ipconfig" in it and press enter;

4. If the printer is directly connected to the computer, then the IP address of the computer is the IP address of the printer, and the "IPv4 address" on the screen is the IP of the printer.

The address of the printer, you need to open the menu on the printer interface, there is a print address in it, and it can be displayed after clicking. In addition, it is to print the printer's configuration page, which can be found in the report option in the menu, and the configuration page can be printed directly, and the address information and other information will be printed. Of course, remember to make sure that your printer is a network printer, otherwise there will be no address.

Menu - Devices & Printers - Find the printer you want to see the IP of, right-click - Properties, there is an option for a port, and there is an option to check it below.

It is usually the IP address of your computer, which can be viewed by your online neighbors. If it's a high-end line printer, you may have to ask the management how to operate it.

You print a test page with the IP address of the printer on it.

The first way to check your computer's IP: right-click "Network Neighbors", select "Properties", then select the network protocol that has been installed on the machine, click the "Properties" button, and you can see the IP address of the machine in the dialog box that appears. This method is also the most commonly used.

The second way to check your computer's IP is to click "Start|" with the mouseProcedure|Attachment|ms-dos mode", open an MS-DOS window, enter "ipconfig" in the prompt, and you can see your IP address after entering.

The third way to check your computer's IP is to use the program. When you enter the MS-DOS state, enter "route print" after the prompt, press enter, and your IP address will also be displayed.

The fourth way to check your computer's IP: click"Get Started|Run"。

For win98 machines, enter winipcfgwin2000 xp in operation, enter cmd in operation, and then enter ipconfig.

View the machine and still need tools? Indissoluble!

1.That's for sure, otherwise how can other people's network ** businesses make money.

What exactly are you trying to express?

It shouldn't be, but you can use**tool**IP from other places, so that the IP found by others is the one you are looking for, not your real IP recommended tool Flower Thorn**Scattered Yukong Yawei** **The address can be searched.

1: Start-Run-Enter cmd 2: When it comes out, type: ipconfig all and then enter nslookup or tracert

Connect to Google three times in a row and repeat the first three times and this is the last step to do.

Now the computer on which you install the printer is equivalent to a print server. The other clients are the submachines. The requirement for the connection is to open the printers on the server in a shared way.

Share by computer name.

This also needs to have a subnet mask, confirm that they are in the same subnet, so that it can be displayed normally, and there is also the need to set the transfer file to share.

No, only with reverse wiring (you need to re-plug the head).