There was a problem saving the file with VideoStudio

Hehe, it just so happens that I started using VideoStudio Green a few days ago and I also had this problem, after wasting my three times for a total of ten hours of saving (I was in the exact same situation as you), it all showed that it had encountered a problem and closed 99% of the time. Fortunately, I saved the project before sharing the transformation.,So I calmed down and thought about it carefully.,The key to finding the problem is that the video is a green version.,Maybe due to the problem of greening and streamlining.,It's estimated that there are fewer key files in the program folder.,Can't call the hardware.,Resulting in the failure of the conversion disk.,Most people use the installation version or cracked version.,So you can't find this problem.。

All of the above is nonsense, let's solve it, right?

First of all, save the finished project, which is a must. Then find the best version and install the new VideoStudio installation version, I don't know if it can solve our problem, this method is not in line with our original intention of using the green version of the software, just for reference!

The second method is to share with the saved project points, select the ***** option, and find the option of the virtual *** disc image (I don't remember the specific name, you can find it yourself), our purpose is to directly output it as *** image. In this way, if there is no physical hardware involved, there will be no error.

Since you're in the same situation as me, do the same!

To add to that, if you used *** disc to burn directly, then even if 99% of the errors are reported, your disc is still good, because you didn't start burning the data into it at all.

6 minutes** is not how big, if you want to be clear, it depends on whether your source file is clear enough, if you want to be on an ordinary *** disc player**, the resolution of 640*480 is enough. If you want a higher image quality, you can do it yourself (anyway, higher than 640, it will definitely be clearer, and the relative file size is larger).

As for the merging of ** tracks and audio tracks, as long as you set it up, you can naturally merge it easily, it's very simple. There is a little trick to pay attention to here, for example, there is a fixed length for the background, but if you want to record, you may have to be at the corresponding point in time. Here the recording can be set at will, and the background can only be added one by one.

It's a lot of ingenuity here. Trust you to do it.

If you still have questions, ask me again!

I've come across it, it's resolved. You can't think of the cause of the problem.

First of all, you make sure that the format of your hard disk is NTFS format, whether it is the location of the software or the location where you save the video or the location where you have temporary files, it must be a hard disk partition in NTFS format, FAT32 format does not support large-capacity files, so there are often errors when saving, as long as you change to NTFS format, there is no problem.

I've also encountered the problem of your VideoStudio closing issue.,Later, I uninstalled VideoStudio and cleaned the registry with Super Bunny.,It's fine.。 As for the merged audio tracks you mentioned, first select the file--- insert ** into the timeline--- insert the audio --- into the audio track or to the music track, and that's it!

I think VideoStudio is not easy to use at all, and it takes up a lot of resources, so I recommend that you don't use it, change to another software, forget it, you can find it on the Internet.

Make it bigger, I forgot what it was.

If you install 3 kinds of software, there may be decoder conflicts, and there is a chance that there will be the problem you said. Please try it with 11.,It's OK to choose *** format.

Use the software "PowerDirector", which is much easier to use than VideoStudio and is extremely powerful!

I use it a lot, and nothing like this happens.

Video.

1、Use512The memory is indeed a little smaller,But the memory is small will only affect the running speed,If it can be added to more than 1G,Specially do ** processing and then increase it,It should be said that the overall configuration of the computer,Not only refers to the memory。

2,About the software installation may guess that there is a possibility that some file plug-ins are not neat, there is also this possibility,It is recommended that you go to the trial version of large software**,The cracked version cannot rule out this possibility,If you want to crack the http:You can find a lot,And they are more secure。

3. You can try to redo the system once and then install it.

If, if it was possible before, it should be possible, if not, you can try to change to a higher version.

4. The error prompt will definitely be found, but you can look for the corresponding prompt on the Internet.

5, I haven't found a problem with the size of the film, and it's no problem to make a ***.

What I can't do:

1. Save the project file first, restart the machine, run VideoStudio, open the project file, and share the output.

4.There are some versions of the picture picture for win7 support is not stable. Painting sound and painting 12 or more is perfect support for win7。

1.It is recommended that you try again: click to share --- select the output format--- then there is an optimized** dialog window (some versions do not have this function, it may be from the meeting 11) - point to receive (no version of this function, directly appear in the next dialog window), a save (save as) dialog window appears, look at the file name column below, whether there is a file name with vsp as the suffix, if so, remove the vsp.

This is one of the reasons why this happens.

Reason: After rendering, the software will automatically **generate**, because the ** machine can not recognize the file with VSP as the suffix, so to 99%, when the recognition is carried out, it cannot be carried out.

2.When your computer is set up like this: open a local disk such as a D drive, and in the "Tools" folder option at the top of the toolbar View "Advanced Settings" box without checking "Hide the extension of the known file type", 3...When you open the previous project file, whether you want to or not, then when sharing, create a file Select Output Format, a save dialog will appear, and the file name field below will appear the name you named when you saved the project, with VSP as the suffix.

In Section 2, if you check "Hide the extension of the file type you know", this will not happen.

You can use screen recording software to record the screen (VideoStudio comes with it). After the screen recording, it is directly in WMV format, and the sound quality and clarity are basically lossless.

2.Whether the VideoStudio is muted or not, as shown in the following figure:

3.Whether the computer volume is turned on, as shown in the figure below

4.Whether the power and volume of the speaker are turned on, and whether there is a problem with the speaker.

5.After all the exclusions, it still can't be solved, then it is the problem of the audio format in the **, you can use audio conversion software, such as a format factory, to convert the audio in the ** into *** independently, and then load *** into the ** track.

What is your ****?,If you are from the Internet**compressed**,You need to use a converter such as a format factory to transcode it in order to put it in VideoStudio to work normally,Otherwise, there will be certain problems。 If the video recorder directly pours VideoStudio into Video, it may be that the video recorder's compression format VideoStudio does not support it, or it is recommended to convert the format.

It may be that the audio track file does not meet the requirements of VideoStudio.

Change the format to see if it works.

1. Software Failure.

1. Virus, use 360 security guard to kill malware and Trojan. 360 anti-virus all-round investigation and killing!

2. There are too many running programs and software conflicts. Turn off unnecessary software.

3. If there is a problem with the system, reinstall the system.

2. Hardware failure.

1. Memory failure, too much dust, and poor contact of memory slots will cause crashes.

2. Poor CPU heat dissipation, resulting in protection and computer crash.

3. Hard disk problem, hard disk has bad sectors.

4. Motherboard problems.

5. The power supply is unstable, which will also cause a crash.