-
Sun City Community, Qinbei District, Qinzhou City, Guangxi.
-
You can sell it to someone who buys it!!
-
It's still dropping, and that thing can't be sold for money, and a bad electrolytic capacitor is useless.
-
The disposal method of waste capacitors is as follows
1. It has become an inevitable trend to adopt physical methods to avoid secondary pollution, and to carry out first-class treatment of waste circuit boards;
2. At present, most of the traditional methods harmful to the environment are used for the treatment of waste circuit boards in China, including direct burial, incineration method, pickling and recombustion method, dissolution method, cracking method and water separation method;
3. It can also use fully enclosed, pure physical technology and pollution-free methods to crush the circuit boards in the waste capacitors, the scrap products in the production of printed circuit boards, and the cutting scraps into mixed powder in a separate state of metal and non-metal, and then use air separation technology to completely separate the metal powder from the non-metallic powder.
-
The disposal method of waste capacitors is as follows:
1. It has become an inevitable trend to use physical methods to avoid secondary pollution, and to treat waste circuit boards in the first way;
2. At present, most of the domestic waste circuit boards are treated with traditional methods that are harmful to the environment, including direct burial, incineration method, pickling method, dissolution method, cracking method and water selection method;
3. It can also use fully enclosed, pure physical technology and pollution-free methods to crush the circuit boards in the waste capacitors, the scrap products in the production of printed circuit boards, and the cutting scraps into mixed powder in a separate state of metal and non-metal, and then use air separation technology to completely separate the metal powder from the non-metallic powder.
-
The disposal method of waste capacitors is as follows:
1. It has become an inevitable trend to use physical methods to avoid secondary pollution, and to treat waste circuit boards in the first way;
2. At present, most of the traditional methods harmful to the environment of waste circuit boards are used for the treatment of waste circuit boards in China, including direct burial, incineration, pickling, dissolution, cracking and water separation.
3. It can also be used to use fully enclosed, pure physical technology and pollution-free methods to crush the circuit boards in the waste capacitors, the scrap products in the production of printed circuit boards, and cut the leftovers into metallic and non-metallic mixed powders that are sold in a separate state, and then use air separation technology to completely separate the metal powder from the non-metallic powder.
-
Waste power capacitor waste station**.
Power Capacitive Role:
1.A power capacitor is a reactive power compensation device.
2.The load and power supply equipment of the power system, such as motors, transformers, transformers, etc., must "absorb" reactive power in addition to consuming active power.
3.If these reactive power are supplied by the generator, it will inevitably affect its active output, which is not only uneconomical, but also will cause poor voltage quality and affect the use of users.
4.If the capacitor is connected to the load (such as a motor) or the power supply equipment (such as a transformer) to operate, then the reactive power to be "absorbed" by the load or power supply equipment is exactly supplied by the reactive power "sent" by the capacitor, which is parallel compensation.
5.Parallel compensation reduces line energy loss, improves voltage quality, improves power factor, and improves system power supply capacity.
7.Series compensation can reduce line voltage loss, increase the voltage level at the end of the line, reduce the power loss and power loss of the power grid, and improve the transmission capacity.
8.Power capacitors include phase-shifting capacitors, electric thermal capacitors, equalizing voltage capacitors, coupling capacitors, pulse capacitors, etc.
9.Phase-shifting capacitors are mainly used to compensate for reactive power to improve the power factor of the system. Electric thermal capacitors are mainly used to improve the power factor of intermediate frequency power system; Equalizing capacitors are generally connected in parallel on the fracture of the circuit breaker for voltage equalization; The coupling capacitor is mainly used for the communication of power transmission lines, measurement, control and protection of wild silver side; Pulse capacitors are mainly used for pulse circuits and DC high-voltage rectification filtering.
10.With the development of the national economy, the load is increasing day by day, the power supply capacity is expanding, and the reactive power compensation work must keep up accordingly. <>
-
Hello dear <>
Waste power capacitors can generally be carried out in the following ways**:1Find the local waste material station or e-waste station, and hand over the waste power capacitors to them for processing.
2.Contact the electrical repair company or electronic equipment company in the current loss-making area, and they may buy used power capacitors. 3.
Find relevant merchants on the Internet and contact them for processing. <>
It should be noted that when emptying the old power capacitors, you must choose a formal channel, and do not choose an illegal or unknown businessman, so as not to bring property damage or environmental pollution to yourself.
-
Dear, I'm honored to have your question, and the information you got is: Is there someone with a waste capacitor? **Capacitors are generally scrapped.
It is mainly dismantled and equipped with mountains, ** of which aluminum, copper. If you want to ** capacitor, you can contact the capacitor manufacturer. **Capacitors are generally scrapped.
Mainly after dismantling, ** of which aluminum, copper. If you want to ** capacitors, you can contact the capacitor manufacturers, and there are especially many scrap products that are processed at the end of the year, most of which are by the pound. The compensation capacitor is in the peihuai of someone's **.
It depends on which brand it is, there are several brands of capacitors that have bronze medals in them, but most of the domestic ones do not have Mingpei, and those without bronze medals have no value.
The common ones are variable intercept type, convenient area type, and variable dielectric constant type. >>>More
Hello, the inspection of the capacitor: the capacitor works poorly or fails, which will weaken the high-voltage spark, and the power-off contact is often burned, the inspection method is: remove the distributor cover ** high-voltage line, 5-7 mm away from the cylinder body, open the ignition switch, toggle the breakpoint contact to check the high-voltage flashover, and then remove the capacitor wire, check the high-voltage flashover, at this time the spark should be greatly weakened, such as the two high-voltage flashovers are not much different, indicating that the capacitor is invalid and should be replaced.
In the absence of special instrumentation, the quality and quality of the capacitor can be detected and judged by the resistance level of the multimeter. For fixed capacitors with a large capacity (more than 1 f), the resistance stage (R 1000) of the multimeter can be used to measure the two electrodes of the capacitor, and the gauge hand should swing in the direction of the low resistance value, and then slowly swing back to the vicinity. Then exchange the test rod and try again to see the swing of the watch hand, the larger the swing, the greater the capacitance of the capacitor. >>>More
Capacitance marking method: (1) Direct marking method: use letters and numbers to mark the model and specification directly on the shell. >>>More
From a global point of view, the market of aluminum electrolytic capacitor industry is relatively concentrated. The top five manufacturers occupy more than 50% of the market share, and companies such as Nippon Chemi-Con, Nichicon, and RubyCon are known for their excellent performance and related services for their aluminum electrolytic capacitors. Japanese manufacturers dominate the high-end market, while at the low-end market, Chinese manufacturers are fiercely competitive and ship much more. >>>More