During the rainy season, the eggs are moldy, and the chicks can not hatch

No, mildew proves that it has deteriorated, so you can't hatch chicks.

No, the eggs are moldy, which means that they are broken, how can you pay for the chickens.

That designation is not possible, let alone mold, even if it is good, there must be many conditions to be qualified to be an egg!

It depends! If there is a bacterial invasion inside the egg, it will cause a certain infection to the egg itself, so it cannot hatch.

Generally, there will be no mold on the outside, but if there is mold on the inside, it will be bad, and the chicks will not hatch.

No, even if it hatches, the quality is not good.

Definitely can't do it, the eggs are all broken, and the inside is dead!

Whether the egg can produce chicks or not, the key is whether it has been fertilized, of course, if it is mildew, broken, it is definitely not.

1.If it is an egg that has not hatched, you can shake it to see, if there is a feeling of flow, it is broken.

2.If it has been incubated for a few days, you can use the candle flame to illuminate it, that is, after lighting the candle, pick up the egg and put it in front of the candle, and place it on the top of the egg with your other hand to cover the candle flame to avoid the fire directly entering the eyes, so that you can roughly see the inside of the egg. As for whether it can be hatched, it depends on experience.

No, the eggs that want to be good are still the kind that can be illuminated while waiting.

No, there is no life left.

1 The first thing to do is to determine if the egg is fertilized.

2 If the egg is just a moldy spot on the shell, take the egg in your hand and shake it, listen to the sound to see if you hear a sound in the egg, and if so, basically do not use it to hatch chicks.

You can't all destroy the structure of the egg.

No, fresh eggs are required.

No, it's not science fiction.

Yes, but the chicks that float out are not good.

Yes after fertilization. Or the other way around!

Quicklime meets water in the air to produce heat. Are you sure you want to use this!

Cordyceps flowers are food, if the food is moldy, it is recommended not to eat it again, when the food is moldy, it will produce a variety of molds harmful to the human body, if eaten by mistake, it will cause symptoms such as abdominal pain and diarrhea, and serious will cause cancer, so for the sake of health, do not eat moldy cordyceps flowers.

What should I do if the item is moldy? How to prevent mold and mildew during the rainy season.

Open windows often.

Put some insect-proof and mildew-proof products in the wardrobe, shoe cabinet, bookcase, and bathroom, such as mothballs, hooded activated charcoal, etc. Because not only clothes can be damaged, but also books and leather goods can be corroded by mold and moths, and it is not enough to just keep them in the closet.

Use with a dehydrating breather. Because the humid environment is easy to breed mold and moths, it should be used with a dehydrating breather to absorb moisture and exert a greater anti-mildew and insect effect.

Intermittent ventilation method.

On rainy days, close the doors and windows facing south or southeast (i.e. upwind) and open only the downwind doors and windows to reduce the inflow of moisture into the room. When the weather clears, open all doors and windows to speed up water evaporation.

Charcoal dehumidification method.

Put 5 to 10 kilograms of black wood calendar charcoal in each room, add water and boil for 10 minutes in advance, filter out the water and ventilate and dry, put it in a breathable basket for two days, and put it in a diagonal position in the house. For example, bamboo charcoal made by carbonizing bamboo has more holes than charcoal, and its adsorption effect is stronger.

Lime moisture absorption method.

Lime is an adsorbent, and 1 kilogram of quicklime can adsorb about kilograms of moisture in the air. On rainy days, you can wrap quicklime in cloth or sacks and place it in various places in the room to keep the indoor air dry.

How do you remove mold from clothes?

1. If there are mildew spots on clothes, you can use a little predator buds to rub the mildew spots, and then rinse them with water to remove the mildew spots.

2. Brush the new mildew with a soft brush first, and then wash it off with alcohol. The plaques were first coated with light ammonia, left for a while, then coated with potassium permanganate solution, and finally treated with sodium bisulfite solution and washed with water.

3. When there are mildew spots on leather clothes, wipe them with a towel dipped in soapy water, wash them with water immediately after removing the dirt, and then apply nail gram oil after drying.

4. The mildew spots on the white silk clothes can be scrubbed with 5% liquor, and the mold removal effect is very good.

5. If the mildew is heavier, you can apply 5% light salt water to the mildew spot, place it for 3-5 minutes, and then rinse it with water.

Can't eat! Everything that is moldy has gone bad. It's all full of germs. People who eat things that have spoiled are harmful to the body. Mild diarrhea.

It can be eaten, but there will be toxins, so it is recommended not to eat it.

Moldy clothes are mainly caused by clothes not being washed in time, stains are not washed thoroughly, clothes are not thoroughly dried or placed after washing, and the storage environment is damp. It is recommended to wash the clothes in time, dry them thoroughly and store them in a dry place. Mold stains are color stains, and stubborn color stains have a high fastness to the fibers of clothing, which is difficult to wash with conventional detergents.

The "color stain soaking method" is specially designed for stubborn color stains, and uses the principle of oxidation to easily remove color stains.

Different colors and materials of clothing are washed in different ways.

1. Pure white cotton, linen, polyester clothing, you can use white clothes to remove mildew

1) Wash your clothes with laundry detergent first;

2) Add 1 bottle cap (40g) of white clothes (600g specification) to half a basin of water (about 2 liters), stir well, soak in white clothes for 30 minutes, rinse well. If there are still stains that have not been removed after soaking for 2 hours, take out the clothes, add 1 cap of this product to the basin, stir well, put it in the clothes and continue soaking. The cumulative soaking time should not exceed 6 hours.

Precautions: White clothes are suitable for white cotton, linen, polyester, polyester cotton, cotton and linen fabrics, do not use colored clothes (including white background stripes, white background checkered, white background printing), do not use silk wool spandex nylon and other non-chlorine bleaching clothes, do not directly use the original solution.

2. For white clothes of color and other materials, you can use colored clothes to remove mildew stains in combination with collars

1) Wash your clothes with laundry detergent first;

2) Pour a small amount of water (about liters) into the basin, measure the color stain of colored clothes (600g specification) bottle caps with colored clothes (600g specification), add each bottle cap (60g each) of colored clothes and collar to water, and stir well. Soak in clothes overnight and rinse well.

The amount of water should be so that the clothes are just wet, and the net amount of colored clothes and collars should be increased or decreased accordingly according to the amount of water. If the stain is still not removed after soaking overnight, you can continue to soak for a longer time (mildew is more difficult to remove and usually needs to be soaked for several days).

Precautions: Colored clothes are not suitable for fading clothes and dry cleaning, if you are not sure about the fabric of the clothes, you can try it in the hidden place of the clothes; And when using, avoid touching metal buttons, zippers, metal ornaments, etc. on clothes, and avoid direct sunlight.

If not severe, wash with laundry detergent after soaking sufficiently.

Mildew is one of the most important results of damp conditions. This fungus causes irregularly shaped stains. Its exterior color varies from gray to black, but can sometimes change from yellow to red.

It has a musty odor and sometimes causes the fabric to degrade and degrade. Plant fibers or protein fibers are most likely to produce mold.

Mold is difficult to remove. The most effective way is to soak the garment in aerobic laundry pellets and wet it. Aerobic washing is a laundry detergent that inactivates mold and removes musty odors, which can greatly reduce mildew stains on fibers or greatly lighten their color.

It is important to note that different bleaching agents are used for different fiber types before any treatment is carried out, and that the colour fastness is also tested. If the dye does not resist any oxygen bleaching, then test the colour fastness with ammonia or detergent, as this may improve the condition of the garment. Moisture, lack of ventilation or sunlight can accelerate mold growth, so clothes placed in plastic bags should be treated immediately to prevent mold growth.

Especially during the rainy season, the air temperature is high, and clothes are prone to mold and hair. When airborne mould encounters suitable conditions, it will grow bacteria on the medium. The mold has a strong vitality, the general temperature is 25-30, the humidity is above 80, and there is sufficient oxygen, it will grow and multiply.

What should I do if my clothes grow mold? Before inspecting the clothes, the clothes should be removed from the box and hung in a ventilated and dry place. If possible, you can iron it with an electric iron to reduce the moisture on the clothes.

Clothes should be hung at a certain distance to ensure good ventilation. There are a lot of clothes hanging in the clothing store that don't get moldy, which is the reason. Clothes have mildew and white hair, mostly because the neckline, cuffs, bag mouth and front body are not cleaned before collection, which creates conditions for bacteria to multiply.

In such a situation, you should wash with water and a little aerobic water, brush off the feathers with a brush, and then iron them dry, and hang them up to avoid hair growth. After the moldy garment has been treated, it is necessary to wait for the weather to dry outside when the weather is nice. Generally, wool fabrics and fur garments can be dried in the sun, and fur clothes need to be dried for three or four hours with the hair facing out, and the dust will be shaken off after the shade.

Silk garments should not be exposed to the sun and should be dried in a cool place to avoid the aging of the fabric. Clothes should be stored properly after they are dried in the air. When storing clothes, you can put some mothballs and mothballs in the box.

At the same time, it is best to store various clothing such as silk, fur, and wool separately.

During the rainy season, washed clothes are not easy to dry and often have an unpleasant musty smell. If you wash your clothes again in water with a small amount of vinegar and milk, you can get rid of the musty smell. If there is a yellowing area in the clothes or bed sheets in the collection, you can apply some milk, let it dry in the sun for a few hours, and then wash it with aerobic wash according to the usual method.

The rainy season is not because of the accumulation of rain, but because the weather is always cloudy and rainy, and it lasts for a while, and in this climate, things are susceptible to moisture and mildew, so they become moldy, and there are more water molecules in the air, and for a long time, that's it.

Bacteria prefer humid environments.

Moist decomposers or abiotic parts increase.

Because of this season, the air is more humid.

Here are some ways to do this:

1. Do not put wet items in the car for a long time;

2. When the weather is fine, dry the cushion seat cover and foot cushion, wash and change frequently, and pay attention to opening the window for ventilation;

3. If the car is more than 4 years old, it should be maintained frequently to check whether the line is aging;

4. Clean or replace the air conditioning filter element regularly, adjust the air conditioner to internal circulation to prevent dust from entering when it encounters a dusty road, clean the leaves on the wiper cover in time to prevent it from entering the air conditioning pipe from rotting, do not turn off the cold air conditioner immediately after use, it is best to turn the air conditioning temperature higher and dry the moisture in the air conditioning pipe;

5. Put some desiccant in the car, or mildew tablets in the seat gap.

In the case of humid air, the interior of the car is prone to bacterial mold growth, and we can prevent mold growth by the following methods.

Turn on the air conditioner to remove mold.

Keep the interior of the car clean and dry, especially in places such as car air outlets, seat cushions, floor mats, carpets, etc. Clean up the trunk debris regularly to prevent the long-term accumulation of debris and the odor.

You can place a simple dehumidifier box inside the car, and replace the dry bag inside regularly to remove moisture without driving.

The easiest way is to put a few packets of desiccant in the car, which is sold in many places, which is very convenient and not expensive, just don't put more, the effect is too strong and not good, and then pay attention not to break the bag.

The important thing is prevention, ventilation and dehumidification can be used. Enhance indoor air circulation. Install a dehumidifier to dehumidify.

It can prevent mold on furniture, and the furniture that has been molded can be wiped with medical alcohol. It can effectively kill the growth of mold. If you want to touch up the paint, you should wait for the furniture to dry thoroughly.

Dear, there are many ways, such as putting some carbon packets in the car.

Put your car in the sun when you're fine, and then open the windows a bit.

You can place some desiccant or mold proof tablets in the crevices of the chair.

Pad a mat and take it out to dry from time to time.

Buy a piece of activated charcoal and hang it in the car

l. Exposure method: Spread the moldy granules or block feed thinly on the clean cement or lime ground. Flip often and bask in strong sunlight for 2-3 days.

2. Roasting method: Put the moldy granular and powdery feed into an iron pot and roast it with a slight fire for about half an hour to remove the mold.

3. Peeling method: remove most of the mold mold from the feed raw materials such as corn, beans, wheat, rice, etc.

4. Lime water immersion method: put the moldy feed into 10% pure lime water and soak it for 3-4 days. Then rinse with water repeatedly and let it dry.

5. Vinegar solution soaking method: break the moldy soybean cake, peanut cake, rapeseed cake and other cake feed into pieces, soak it in the vinegar solution of 1 for about 12 hours, and then rinse it twice with water and dry it.

6. Fermentation neutralization method: add water to the moldy feed and stir it evenly to make its moisture content about 50, then pile it together for natural fermentation for 24 hours, then add 2% plant ash and mix well and neutralize it for two hours, put it into a bag, rinse it with water, filter out the plant ash, and finally pour out the bran with l times and ferment it in the greenhouse for 7 hours.

However, the feed with serious mildew must be thrown away, otherwise it will not only harm livestock and poultry, but also leave carcinogens and be harmful to the human body.