Reduce the display range of the monitor, and how to adjust the display range of the display

I can't help but talk about you, even if it lowers my rate.

If you say so, you might as well use a saw to see off the perimeter.

Your problem is more difficult than others. One is either to change the display, and the other is to window. Three, either switch to a 19-inch resolution, such as in the game, etc.

Windowing does what you want, and you set the desktop to black wallpaper. The problem is whether your game supports window drag-and-drop, if you can't, find third-party software, such as online game general windowing master, d3dwindower, directx game windowing tool, etc., etc., some support custom resolution, if your original 19-inch is widescreen, then the corresponding resolution is 1440x900. Then hide the taskbar and desktop icons to meet your requirements!

ps.If you have a mouse with the game integration system, it will run out of the window when you move the mouse in the game. There is also a solution, or use software.

You still don't get satisfied. Yes! You install a virtual machine and run slowly, check off the mouse integration, and the rest is to see if you run smoothly.

I often meet that customers insist on 24 when they are equipped with computers, saying that they look comfortable, and then take them back to play the game for a few days, saying that they will take it back for 19, and 24 is too big for their eyes to stand it.

Change the monitor (neither economical nor affordable), in the case of a 24 monitor, the best resolution is fixed, and no software can achieve the desired effect, if you use a virtual machine, the performance of the computer will drop by half, it is better not to use it;

Otherwise, buy a set of wireless mouse keys, sit farther away, and adjust the resolution slightly (16:9 to 1360x768, 16:10 to 1440x90), and look at it.

1. Use Win+X combination hotkeys.

Bring up the shortcut menu in the lower-left corner of the desktop, and then select Control Panel.

p）”；2. In the pop-up control panel interface, find and click "Appearance and Personalization";

3. In the list of settings that opens, find and click "Enlarge or reduce text and other items";

4. In the interface of changing the size of all items, select according to actual needs;

5. After the above settings are set, you need to log out or restart to take effect.

The specific steps are as follows:

The materials that need to be prepared are: computer,

Take win7 as an example:

1. First turn on the computer, click on the "Control Panel" in the start menu bar in the lower left corner.

2. Then click to open "Display" in the pop-up window.

3. Then click to select "Smaller" in the pop-up window, and press Enter to confirm.

4. Then the icon on the desktop will become a small sail pin.

How to adjust the display range of the display:

There is an option to adjust the length and width in the menu options on the monitor, use that tone, and find a ruler next to it to measure the distance.

Composition of the LCD monitor:

Generally speaking, an LCD monitor is made up of the following parts:

1. LCD module.

Glass substrate: Inside are liquid crystals and grid-like printed circuits. Timing control:

It is used to control the timing and voltage required for the deflection of liquid crystal molecules. Lamp: Produces a white light source.

Backlight: Reflects the light produced by the lamp onto the LCD screen.

2. a control panel.

The control board starts to convert the signal for banquet. Converts signals from various input formats into signals with fixed output formats. For example, the input signal to the screen of 1024 x768 can be 768, etc., and finally converted into the output format 1024 768.

3. Inverter.

High pressure is generated and is used to light the tube. <>

To make the display area smaller, you need to adjust the resolution, and the specific operation methods and steps are as follows:

1. First of all, now it is displayed in full screen as shown in the image below.

2. Secondly, after completing the above steps, right-click on the desktop and select the "Display Settings" option as shown in the image below.

3. Then, after completing the above steps, you can view and change the "Resolution" option parameters as shown in the figure below.

4. Finally, modify the resolution, and then click "Keep Changes" to finish, as shown in the figure below. In this way, the problem is solved.

Open the graphics card control panel to adjust [the requirements are digital interface connections, such as HDMI, DVI, DP and other interfaces].

As shown in the figure below, [first adjust the resolution to the center and center].

The strongest answer on the whole network, if you meet the requirements, you must like it.

Example: NVIDIA GT1050:

The second step is to open and enter.

The third step is to adjust and determine.

He has the minimum.

There is a toggle switch in the bottom right corner.

Discovered in 1888 by the Austrian botanist Reinitzer, liquid crystal is an organic compound with a regular molecular arrangement between solid and liquid. Here's what I've brought, welcome to reading!

Diagram resizing method of the display:

Next, let's see how the XP system is modified by the cave tour, which is a little more complicated:

In the pop-up dialog box of the effect, you can see that the "Use large icon" option, you can select it to make the icon on the desktop larger.

Some friends found that it was the size of a large icon fixed by the state system, and some friends may not like that size, and want to be bigger or smaller, what should I do? Then I will customize the size of the banquet, as shown in the figure

It's still just a page.,Properties-Appearance-" high-level.。

On the advanced page, the small arrow of the project opens the drop-down, finds the icon, and then sets your own size, as many as you want.

Of course, after setting the size, you need to adjust the distance between each icon, so you still switch to the diagram spacing *** vertical and horizontal *** in the project just now, and you can set it to the appropriate distance.