Is it better to have a soft edge tempered film or a hard edge tempered film for mobile phones? I m r

The soft edge is good, and the most ** full-screen soft edge tempered film has recently been released.

The anti-drop quality of the soft side is better. Of course, it also depends on your own preferences, see what type you like, and choose according to your preferences.

The latest tempered glass launched in the United States in 2012.

Protective film, a high-tech protective film specially designed to protect the screen, is currently the most powerful high-end new product to protect the screen. The thickness of this protective layer is only millimeters, which can completely cover the original screen surface, prevent damage from external forces, scratches, and increase the impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

On top of that, hackers.

Launched the tempered glass oxygen eye film, on the basis of protecting the mobile phone screen, to prevent the harm of blue light radiation to the human body, prevent myopia, and realize the dual protection of man and machine.

Look at your mobile phone screen, if the mobile phone screen is, there will be white edges with tempered film, and the white edge filling liquid is not much use, and the tempered film with a frame is ugly.

Actually, the effect doesn't make much difference.

The tempered film of the soft side is not easy to break, the edge is easy to accumulate dust, and the edge of the toughened film of the hard side is easy to break.

The black border film is good.

Black bars are recommended. The black and white edges of the stove family are essentially tempered films that cannot be pasted to the edges, in order to cover up the places that cannot be pasted. However, if I consider the appearance, I do not consider the white edge.

It doesn't match the color of the phone. So it's black, and there's no sense of tearing. The tempered film with the black edge needs to be thickened by the rubber layer and the screen is pasted together, so the screen is seriously sticky after pasting, and because of the process problem, the production cost of the tempered film to the edge is better!

Introduction of tempered film

Tempered glass mobile phone film is a new mobile phone protective film launched in China in 2012, which is a high-end new product with the most enhanced protection for the screen. The thickness of this protective layer is only millimeters, which can completely cover the original screen surface, prevent damage and scratches by external forces, and increase the impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

There are still a lot of places where tempered glass is used in the home, such as doors and windows, coffee tables, shower rooms, etc. Many times when you hear tempered glass, people will think of the word "strong", as we all know, in the past, there was no sharp corner after the tempered glass was broken, and it was also called "safety glass", but because of a number of tempered glass self-explosion incidents, people understand that the lack of tempered glass is also an irregular missile around them!

Generally, the surface hardness of plastic film does not exceed about 3h, the hardness of glass is about 6, and the hardness of tempered glass is slightly higher than that of ordinary glass.

The tempered film is better.

Compared with the tempered film, the soft film is still a little better than the tempered film, the tempered film has stronger protective performance, which can effectively improve the impact resistance of the screen, the hardness is higher and it is not easy to scratch, and it can be coated with different films to obtain different functions.

The difference between soft film and tempered film:

The soft film sounds very tall, but in fact, it is made of the most common PET or TPU material, simply put, plastic, the current high-end hydrogel film is generally made of TPU material, the typical characteristics of this material are low temperature soft performance is relatively good, strong plasticity, can be cut into any size and shape, and has a certain scratch repair ability, the thickness is usually relatively thin.

The structure of the tempered film is relatively more complex, which is mainly covered with multiple layers of functional coatings such as silicone mold, oleophobic layer, etc., on the tempered glass, so as to form a hard glass cover, the thickness is usually relatively thick.

The soft film basically has no impact resistance, and the protection of the screen when it is hit is basically 0, and it is very easy to produce scratches (self-repair ability is only for relatively minor scratches), and the market is flooded with a large number of ** IQ tax products, which are not easy to fit.

Tempered film is the most common mobile phone protective film, its biggest advantage is that the protective performance is stronger, because the tempered film is equivalent to a layer of hard armor wrapped outside the screen, when the screen is hit by external forces, the tempered film usually plays a role in dispersing the value of the force, thereby improving the survival probability of the screen itself, which has been confirmed countless times on the mobile phone I use.

Mobile phone tempered film and soft film are better than tempered glass film.

From the perspective of protecting the mobile phone screen, the tempered glass film is better, and when the mobile phone is dropped, the impact resistance effect is better, and the screen is not easy to break.

The tempered film is also relatively cheap, the tempered soft film belongs to the PE material, which is easy to change the shape and scratch, and is relatively expensive, because of the relationship between the production scale, resulting in a higher cost than the tempered film.

Phone screen saver tips:

1. Clean regularly.

This is important and important to remember when using your phone. Cleaning your phone screen regularly can effectively prevent your phone screen from being damaged by dust. At the same time, the mobile phone contains precision devices, which is recommended when you use it.

2. Keep away from the magnetic environment.

If the mobile phone is in a magnetic environment for a long time, the screen is prone to malfunction or touch screen shift. It is recommended that you try to avoid prolonged close contact between mobile phones and magnets, induction cookers and other magnetic objects.

3. Prevent high temperature and high humidity.

After the phone is used, it is best to put the phone in a relatively dry place and clean up the residual moisture on the screen in time. Because the residual moisture can easily cause a short circuit on the screen. <>

The performance of the tempered film is better, and the soft film is far inferior to the tempered film in terms of hardness and wear resistance. But there are still a lot of friends who don't know and don't know the difference between them, so I'll analyze it for you below, I hope it can help you.

The difference between soft film and steel slag loose film

1. Fall resistance

The soft membrane has a weak ability to resist fallsIt only prevents the small scratches that we make when we use our phones on a daily basis. The tempered film is much stronger than the soft filmIt can effectively reduce the probability of breaking and scattering when the mobile phone screen is accidentally dropped, and at the same time prevent accidental scratches, and increase the impact absorption, which is 5 times higher than the standard of soft film!

2. Material

The soft film is a honeycomb structure with super toughness TPU material. Its material is relatively soft, malleable and retractable, so it can play a scratch-resistant role on the mobile phone screen, but there is no anti-drop cushioning effect. However, if you buy a curved screen phone, then you can only stick a soft film.

Soft film. The tempered film is made of tempered glassIt is covered with multiple layers of protective coating, which has high hardness, is also wear-resistant, and scratch-resistant, but because it has a certain thickness, it is not suitable for use in models with curved screens and under-screen fingerprints.

Tempered film. 3. The difficulty of the film

The tempered film is particularly convenient and simple to touch the rubberNo bubbles, even if you are a handicapped party, it is easy to paste. The soft film is more troublesome and difficult, and it is easy to fall into the dust when pasting, so you must at least buy a soft film to be able to paste it perfectly. In addition, when you finally put the film on, the two sides of the screen will warp up after using it for a period of time, which will be particularly annoying at this time.

For the protection of the screen, you only need to paste an ordinary soft film to ensure that it is not scratched.

Buying a mobile phone is rarely equipped with a mobile phone film, and even if there is a mobile phone film, it is generally a soft film or a very thin hard film, so the tempered film.

The use is not as big as it seems.

In many cases, after the mobile phone falls to the ground, the tempered film is broken, but the mobile phone screen is not broken.

Because the screen of the mobile phone is fully able to withstand such an external force, and the tempered film cannot withstand it, the tempered film will break. In fact, the tempered film sometimes greatly reduces the ability of the mobile phone screen to resist impact, but makes the mobile phone screen easier to break.

The thickness of the protective layer of the tempered film is only millimeters, which can completely cover the original screen surface to prevent damage and scratches by external forces, and increase the impact absorption, which is 5 times higher than the standard of the soft film. It does not affect the effect of the screen. It is easy to use and does not bubble.

The light transmittance of the picture is as high as 98%. It does not affect the use of mobile phone cases and other mobile phone accessories.

However, compared with the soft film, the tempered film appears to be thicker, and it also affects the sensitivity of the touch screen. The surface of the tempered glass will be uneven (wind spots) and there will be a slight thinning of the thickness. The reason for the thinning is that after the glass is softened by hot melting, it is quickly cooled by strong wind, which makes the crystal gap inside the glass smaller and the pressure increases, so the glass is thinner after tempering than before tempering.

The tempered film feels a little better, the soft film has a better protective effect, the tempered film is fragile, and the soft film is not fragile.

The film armor mobile phone film is not bad, and the tempered film and soft film are available!

1 5 Flexible film and tempered film each have their own benefits. 2 5 soft film It has a soft texture, high transparency, strong fit, and the mobile phone is both beautiful and clear after pasting. However, the soft film has a weak resistance to falls, and can only prevent small scratches in daily life.

3 5 tempered film, it is much thicker than the soft film, hard texture, and better drop resistance. After pasting it, it does not fit the phone completely, and the thickness of the tempered film can be seen on the side. Therefore, there is no soft finger such as the membrane is beautiful.

4 5 The tempered film of the straight screen does not have black edges, but if it is a curved screen, the tempered film is called to have black edges, in order to prevent the accumulation of gray layer from affecting the appearance. 5 5 depends on everyone's preferences, if you like the beautiful can paste the soft film, if you want to prevent the mobile phone from breaking, you can choose the tempered film of Weilianqi.

There are several kinds of general liquid liquid films attached to the mobile phone screen:

1. Adhesive film: This kind of film has adhesive backing, very sticky, general transparency, and easy aging, because the adhesive layer is thick, and the film surface will feel uneven after using it for a period of time, and at the same time, because the adhesive layer is thick, there is a small dust will not affect the paste effect. Previously non-touchscreen phone film.

Used more. 2. Electrostatic film: This is just a name, and it is not really attracted by static electricity.

The contact surface between it and the screen has a thin layer of silicone-like material, which is weakly glued, and at the same time, there is no dust when pasting, otherwise there will be bubbles. This kind of film is also divided into several kinds because the surface is not treated: ordinary bright surface, frosted surface, and high brightness.

Scratch resistant. At present, this film is more used on touch screens.

3. Gold steel film: different regions have different names. This kind of comparison is easy to distinguish, the light transmittance is good, the surface is scratch-resistant and hard, and it can be called a piece instead of a film.

Based on your description, it is assumed that you are posting the first type, and it is recommended to replace it.