How to punch in and out of the driving school section 2 network students

The candidate takes the card to the driving school, inserts the school card on the machine when playing and presses the fingerprint will prompt the punch card successfully, if the punch card fails, you need to reinsert the school card and press the fingerprint again.

According to the new regulations of the Ministry of Public Security Order No. 123, the total number of hours of driving test for C1 models is 78. The specific regulations are as follows:

Module 1: 12 hours of theory.

Module 2: 26 hours in total. Among them, there are 2 hours of theory, 3 hours of simulated driving, and 21 hours of practical operation.

Module 3: 40 hours in total. Among them, there are 16 hours of theory, 4 hours of simulated driving, and 20 hours of practical operation.

According to the syllabus, the number of hours is cumulative, and each student's theoretical training time can be signed up to 4 hours per day, and more than 4 hours are also calculated according to 4 hours, and less than 4 hours are counted as many as the time from the sign-in time to the time of signing out.

Subject 1 Exam: You must sign for 12 credit hours and submit it for review before you can make an appointment for the Subject 1 exam.

Subject 2 exam: 2 hours of theory, 3 hours of simulated driving, and 21 hours of practical operation. After the class hours are submitted for review, the subject 2 exam can be booked.

Subject 3 exam: 16 hours of theory, 4 hours of simulated driving, and 20 hours of practical operation. After the class hours are submitted for review, the subject 3 exam can be booked.

When you have completed your online learning hours, you only need to go to the driving school you signed up for to check the card once, and check the learning hours into the card.

Learned, yes, it makes too much sense.

It's really good to study well.

When practicing subject 2, the driving school will issue a lesson card to each student. When you start to get on the bus to practice, you need to insert this school card into a punch-in and jujube cleaning device, and press down your fingerprint or start face recognition, and then punch in and out. And when you finish practicing the car, you need to take this card off the punch card, and the end of the learning time rock sky punch card.

Subject 2 is an important step in the driving test process, and it needs to be operated strictly according to the regulations. Before starting Module 2, each student will receive a credit card. This credit card records the boarding and disembarkation times of students, and they need to strictly follow the clock-in rules during the study period.

Subject 2: Punch in: Insert the credit card into the machine and press the fingerprint to prompt that the punch in is successful. In general, the second semester hours of C1 subjects are 16 hours, and the second semester hours of C2 subjects are 14 hours. Completing the full class hours is the basic requirement for taking the subject 2 exam, and the number of hours can only be increased but not decreased.

Recording of the duration of course 2: 60 minutes per class hour, and the effective teaching time shall not be less than 45 minutes. In addition, each student's daily classroom learning time and practical operation time shall not exceed 4 hours; A maximum of 4 hours can be reached per high school day, and the excess part will not be recorded by the system.

The total time for check-in in the second subject is that the second subject can only be booked after completing 16 hours of study, but the daily check-in practice time cannot exceed 2 hours, so the study time should be five and a half days, and the exam can be made after learning enough. So the fastest time is seven days.

Relevant regulations: 1 class hour is 60 minutes, of which the effective teaching time is not less than 45 minutes, and the theory and boarding time cannot exceed 4 class hours per day. According to the requirements, each subject must be completed by the road transport management department, and then transmitted to the public security traffic management Internet service platform, before students can make an appointment for the exam.

Subject 2 punch in: Insert the credit card into a punch card, press down the fingerprint or start face recognition, and then punch in and out.

1. Subject 2 punch-in content:

1. Theoretical knowledge includes basic driving operation specifications and field driving knowledge.

2. The actual operation includes driving posture, vehicle inspection and adjustment before driving, getting on and off the car, starting and stopping, speed shifting, gear shifting, dismantling blind reversing, driving position and route, as well as reversing into storage, ramp fixed-point Xiyu nuclear parking and starting, side parking, curve driving, and right-angle bend.

2. Subject 2 punch-in time:

The C1 Driver's Licence Subject 2 test generally requires a total of 16 credit hours.

Module 2 includes theoretical hours and practical hours, but only practical operations are required, so the attendance time of module 2 is usually 16 hours.

About two hours of theoretical hours in subject 2 are basically studied on the software, and there will be corresponding records after learning, and there is no need to punch in and out. (The requirements for hours vary from region to region and are for reference only).

According to the relevant regulations, whether it is theoretical or practical hours, the daily learning time shall not exceed 4 hours. You can punch in up to 4 hours a day, and you can finish it in 1 week at the earliest. (Each class hour is 60 minutes, and the effective teaching time shall not be less than 45 minutes).

Subject 2 Examination Requirements and Precautions:

1. Subject 2 Exam Requirements:

There are two chances for each exam. If you fail the first exam, you can take the second exam after re-verifying the finger removal. The test process is the same as the first time, and it is the same car and the same track.

Passing all five items is the passing of the entire subject 2, otherwise you will have to retake the exam. If you still don't pass the test after running out of two test opportunities, you need to practice again to make an appointment for the test.

2. Precautions for Section 2:

1. When getting on the bus to prepare, you must adjust the seat and fasten the seat belt before you can verify your fingerprints.

2. Each test item in the test room is detected by GPS positioning, and the control line (yellow dotted line) of each item represents the test area of the project. As long as the front of the vehicle crosses the control line, it means that it has entered the test of the project, and the test must be completed according to the test rules of the project.

3. Before entering the next test item each time, confirm whether there are still vehicles in front of the test, if there is a vehicle in front of the test, you must stop and wait in front of the yellow line of the project, and you are not allowed to enter.