What is the most effective way for a PSP to prevent refurbishment

Methods of inspecting the refurbished machine: 1When buying, look at whether the screws have been screwed, and the traces of screwing may be refurbished machines, because the screws of the assembly line are generally made by pneumatic guns; Whether the screen has dust and dead pixels is also a place to pay attention to; As shown in the figure, the PSP microphone and speaker are also quite easy to accumulate dust, and the floor owner should pay attention to it (the microphone is on the side of the D-pad, which is quite easy to get dust) 2

As shown in the figure, when the PSP battery cover is opened, the new PSP is only two labels, if there are other labels, don't believe what JS calls warranty labels and the like, the warranty should be pasted after buying, there is a screw on the back cover, and some refurbished revision machines have a label on it to prevent the screws from being found to have screwed over the traces. 3.As shown in the figure, there is also one of the most easily recognizable places is the UUD hatch cover, the new machine is impossible to have dust, but there will be a trace of oil liquid, if there is dust, it is very likely to be a refurbished machine.

On the question of the film, the film of the game store owner is free to provide you with a sticker, but the film is cheap, only 10 yuan, the quality can be imagined, if the landlord has a wider hand, he should not care about spending another 30 yuan to paste the imported film, my PSP1000 film has not been worn so far. Of course, it would be best if you could move the boss to paste the film. PSP memory stick is currently popular 4G-8G-16G more, 4G because the capacity is too small, can no longer meet the needs of more than 1G games at every turn.

**Around 85--95 8G is the current mainstream of use,**Red rod is about 140,Black bar is about 120,Quality is OK,But one thing to note,Can't be too full,Otherwise it will lead to file loss。 16g is not very recommended to use, although the capacity is large, but it is said that records and documents will be lost, **between 250--280 The so-called red rod refers to the stick is mainly red and black, the black rod is mainly black and white, take the God of War as an example The installation time is about a minute, and the black stick is about 7 minutes, it may be a little faster, the red stick is commonly known as the ultra-high-speed stick, and the black stick is used to being called a high-speed stick. Of course, the sticks of the video game store on the market are generally assembled, and if you want to buy the original, you have to go to a digital store such as Hongtu Sanpower to buy, the landlord should pay attention to the original stick, the original stick is very expensive, hundreds at every turn, if the hand is not very rich, it is recommended to use the group stick I am honored to be able to explain in detail for the landlord, I hope my landlord will be helpful, and I wish the landlord to buy his favorite love machine as soon as possible.

See if the screws have a knife edge mark Whether the seal of the battery compartment is new or something like that There is a brand new 2000 is basically out of print It is very likely to be refurbished If it is brand new It is normal to 1800 to 2000 Article**:

html/

1.See if there is any dust at each interface.... 2.See if the battery gold finger is worn out, including the copper contacts on the machine.... 3.

Check the umd slot to see if anything is out of the ordinary... 4.To test the smoothness of the joystick, the best thing to do is to go into a browser and look.... 5.The easiest thing to see at a glance is the silver-white decorative circle behind the umd, which is the thing that can't stand the wear and tear... 6.

Check the highlights of the screen, keep switching the face with the original theme, and check it well....There are so many steps and many more, but as a novice, with such a careful observation method, the average person will not take the refurbished machine to find themselves boring....When you're done, you suddenly see you saying that you prevent PSP renovation? How can you prevent it, unless it's just to prohibit everyone from reselling their own PSPs?

8 The production method of the refurbished machine is the identification method: The current refurbished machine is divided into 8 kinds of original refurbished whole machine refurbished half machine refurbished original refurbished: the machine is PSP factory number and other text information And the packaging workmanship is simple Half machine refurbished:

This machine only has a refurbished cover, which is the front panel, in front of it.

In fact, the most effective thing is to take me with you to buy Luo. Joked, if you're new to it, it's best to bring a friend who plays PSP for a while, and he'll be more familiar with the sense of hand and all aspects of the orange sparrow. If you go by yourself, the round stool will probably be hit by the rough and pure rate.

According to the serial number of the mobile phone, go to Apple's official **query,**90-day warranty,The one-year warranty deadline of the mobile phone shows the results clearly,This is true。 After the warranty period, it may be a refurbished machine, and if it can't be queried, it is fake.

Pls do you want to buy a mobile phone or a PSP?

Hello, you can refer to **.

But here are a few ways to identify a refurbished machine.

The first thing to look at is whether the two seals (dark gray) under the battery have been torn! In addition, please check whether the solid color of the two seals is the same, and whether the font on the top is clear, especially the small rectangular seal below.

Secondly, look at the appearance of the machine to see if there are scratches, whether there is dust in the gaps of the rocker and the L R key, and whether the color of the machine is dull. The appearance of the new machine is very comfortable, like a new one! (This can be used to distinguish whether it is a used phone).

The last thing is to check the motherboard of the machine,09The motherboard before 09G can't be a new machine,You can see the motherboard information after brushing the Pro system。

If you arrive at the machine and it feels like a refurbished machine, please return it immediately.

I wish you a successful purchase

The refurbished machine has the price of the refurbished machine, and the new machine is the price of the new machine.

= Save money to buy NGP (PSP2) will come out at the end of the year I started saving money early Now it's a good loss to buy PSP.

If you buy a PSP3000, you will not encounter a refurbished machine, and it is much safer to buy it in a physical store.

Buy a new model, absolutely not refurbished (unless you are extremely tired).

Go to a place like Computer City.

Pay attention to whether his outer box is brand new, and see if there are any traces of the body on the back side after opening the package.

This requires you to observe carefully to see if the data cable port, headphone port, MS card port, mobile phone gap and other places are spotless, and whether there are scratches on the data cable port and battery contacts.