My computer started the shutdown button inside, and after I pressed it, the computer hibernated

Is it after clicking on the "Shut Down" option and the computer goes to sleep, or is the option that was supposed to be "Shut Down" now becomes "Hibernating".

After clicking "Shut down", the computer does not shut down but goes to hibernation

Open the Control Panel.

Power Options - Select the function of the power button - Change the settings that are not currently available.

Fast Start Shutdown will be enabled.

You can also go to BIOS in Advanced - Advanced Power Management - ERP Support - On (S4 + S5) or On (S5).

If the option that was originally "shut down" becomes a workaround for "hibernation":

Right-click on the sleep properties to open it, and select Power Off in the power button operation option drop-down menu.

The automatic shutdown when the computer is asleep is due to the short sleep time set, which can be solved by following the following steps:

1.From the Start menu, go to the Control Panel;

2.Go to "Hardware & Sound Options";

3.Click on "Change Hibernation Plan";

4.Select the sleep schedule time you want, and then click Save settings, and the sleep time will be automatically turned off when the sleep time is reached.

This one is simple.

The Power Off button is the default setting.

There are a few options for this. Usually click on the arrow on the right and the options will appear.

Standby, hibernate, shut down, restart, ......You can change the default.

Helpful, please give it a thumbs up!!

Take the win10 system as an example, the specific operation is as follows:

1. First of all, we turn on the computer, and then click to open the "Control Panel" in the lower left corner.

2. Then we click to open "Change Computer Sleep Time" in the "Power Options" window that pops up.

3. Then we click on the option in the "Make the computer go to sleep" in the pop-up window, and select "Never".

In addition to this, you can also try the following methods:

Press the power button of the monitor for 10-15 seconds to release the sleep sleep mode, and the computer generally does not need to be restarted.

Or, right-click on the properties in an empty space on the desktop and select "Screen Saver". Then, click the "Power" button, in the pop-up dialog box, select the "Turn off the monitor" option "Never", and then select the "System Standby" option "Never", or set the standby time by yourself, and then confirm to exit.

The computer is set to standby or sleep mode, resulting in a period of time, the computer automatically turns off the display, into sleep mode, after the system switches to the sleep state, the system will transfer all the data in the memory to the sleep file on the hard disk, and then turn off the power supply of all devices except the memory, but it is not actually shut down, just to save energy and protect the hardware to take power-off measures.

Take win10 system as an example, the specific content of how to turn on the computer is hibernate is as follows:

1. The computer is in a dormant state, to turn it on, first understand the specific reason why the computer is in a dormant state, generally speaking, because the computer did not shut down last time, or because the shutdown is due to too many background applications and previous operating procedures, and it is not really shut down.

2. Normal computer sleep: Generally, the system can be restored by pressing the power button and out of hibernation. A long press is to force the system to shut down.

3. It should be noted that the problem that the computer is dormant is mostly caused by the host not being turned on for a long time or being vibrate, poor contact and dampness inside. You can unplug the graphics card, wipe the interface, and the operation is complete.

4. To prevent this problem, first click on this computer to enter the properties and then click on the control panel; Then find "Power Options" and click on the left to select the function of the power button to enter; Finally, find the change settings that are currently unavailable, uncheck the box before hibernation under the shutdown settings, and click Save Changes.

When the computer is turned on, we do not use the computer for a long time or people want to leave a period of time in the case of a starvation, then it is a good choice to put the computer in a hibernation state, the following I will share with you how to set the shutdown button of the computer to the sleep key, welcome to read and learn.

How to set the computer's shutdown key to sleep

Normally, when the computer is in a state of open and boring, press the shutdown button, and the computer will enter the shutdown, which is the same effect as by clicking "Start" - "Shutdown".

Next, let's introduce the computer shutdown button to the sleep key, in the taskbar at the bottom of the screen, right-click, a menu will pop up, and then select Properties.

Select the Start Menu tab in the properties dialog box that opens, and below you can see what the "Power Button Action" represents, and here it stands for "Shutdown".

Click on the down triangle and a list of drop-down menus will appear, with a "hibernate" option, switch over, save and exit.

Click at this point"Get started", you will find that the "shutdown" on the right has become "hibernation", which is compared to step 1. This also shows that the operation displayed by the button on the lower right side of the start menu is the same as the meaning represented by pressing the power on button when the computer is turned on.

After completing the above settings, press the power on button again in the boot state, and the computer will immediately enter the sleep state, indicating that the settings are successful. If pressing the power on and off button before means sleeping, then the operation through steps 1-5 can be changed to a shutdown operation.

What to do if the black screen can't wake up after the computer is standby.

1. If you encounter the situation that you can't wake up automatically from sleep, you should click the boot switch, and you can usually wake up the screen to turn on the computer and enter the computer desktop normally.

2. If you click the boot button according to the first step, and you still can't turn on the computer that is already in the sleeping state, you can check the hard disk indicator, because when the computer is in the sleep state, the hard disk light is in a flashing state, see if the indicator light is flashing.

3. If the hard disk indicator light is not on, it means that the sleep time is very long, and it has automatically entered the shutdown state (belonging to the abnormal state), at this time, press and hold the power button to completely shut down the computer. Then press the boot button, after booting, press the F8 key, and then use the up and down keys to adjust to safe mode (press the Enter key to enter).

4. Use the windows+e shortcut key to bring up the explorer, and then open the control panel;

5. In the interface that opens, select the power plan that Lunhe is currently using, and then click Change Plan Settings to enter.

6. Set the option to put the computer into sleep mode to never, and finally save the modifications.

7. Continue to turn on the power options, make sure Sleep is Never, Mixed Sleep is off, and finally save the settings.

Enter!

Method 1 Laptop words.

Right-click the battery icon and select Power Options;

2. In the letter cavity bar of the left menu, click [Select to turn off the power car rolling energy of the laptop gauge and sail shirt computer cover], and set [When pressing the power button] and [When pressing the sleep button] to [Sleep] respectively.

Summary. Hello, the computer quits sleep, you can refer to the following methods: Method: Start - Settings - Control Panel - Power Options - Select "Hibernation", remove the check mark in front of "Enable Sleep" - OK.

1. Start - Control Panel, open the Control Panel.

2. Find "Power Options" in the control panel and click to enter.

3. Then select Balance, then click Change Plan Settings on the right side of Balance, or others.

4. If you don't want the computer to sleep, you never choose to put the computer into sleep.

5. For the screen to automatically turn off after a period of time, that is, the screen will automatically turn black, you can choose to turn off the monitor, and if you don't want to turn it off, you can choose never, otherwise you can choose the time according to your own situation.

6. The first item is the same to reduce the brightness of the screen, set a time or never, the screen will be slightly darker when the time is reached, and the mouse or keyboard will resume after the action.

Which key to press the computer to exit sleep.

Hello, the computer quits sleep, you can refer to the following methods: Fangpai rebate method: Start - Settings - Control Panel - Power Options - Select "Hibernation", remove the check mark in front of "Enable Sleep" - OK.

1. Start - Control Panel, open the Control Panel. 2. Find "Power Options" in the control panel and click to enter. 3. Then select Balance, then click Change Plan Settings on the right side of Balance, or others.

4. If you don't want the computer to sleep, you will never choose to put the computer into sleep. 5. For the screen to turn off automatically after a period of time, that is, the screen will automatically turn black, you can choose between turning off the display item, and choose never if you don't want to turn it off, otherwise you can choose the time according to your own situation. 6. The first item is the same to reduce the brightness of the screen, set a time or never, the screen will be slightly darker when the time is reached, and the mouse or keyboard will resume after the action.

Hello,There are many reasons why the display display of the electric imitation brigade wide brain is turned on"No ** input",Because the screen is not displayed,So you can rule out the software reason,It should be a hardware problem。 The hardware problem of hail is divided into two situations: one is poor contact, and the other is hardware damage.

Check whether the contact initiation is good. You can check whether the contact between the graphics card and the monitor is good, and whether the contact between the graphics card and the motherboard IO slot is good, and if necessary, you can remove it and reinstall it again to ensure that it is installed in place and in good contact.

If that doesn't work, try a different monitor and see if there's a problem with the monitor.