What is the reason How to solve it, what is the reason for this, how to solve it?

By the way, I'm right.

If you are using a vivo mobile phone, and the mobile phone prompts that the microphone is occupied or the recording channel is occupied, the table indicates that there are other software currently using the microphone, you can try the following methods to clear the occupancy:

1. Clean up the running software;

2. Restart the phone and release the occupancy;

3. Malware occupies the microphone channel notice, you can enter * * in the dial pad to enter the developer options - click "Running Services" - run the process, stop the running program in turn, find the specific program that occupies the microphone, and the corresponding software will be uninstalled. (Some models can go to Settings - More Settings - Applications - View Running Programs).

If the above methods are invalid after operation, you can enter the vivo official website vivo**app--my--**customer service or vivo official website web version--scroll down to the bottom --**customer service--enter the manual customer service to enter the consultation and understanding.

This will have to be reinstalled to solve the problem.

If you have an internet connection, just keep your drivers updated.

Press End Process before restarting.

The network cable has touched it, it may be loose, check the network cable.

1. If there is a lack of prompts when running a software or compiler program, the manuscript tape cannot be found, etc., you can copy the missing copy from the Internet to the specified directory (generally the system directory or put it in the software directory), or add the file reference again.

Second, after the **** file, first extract it (generally zip or rar archive), and then select x86 x64 according to the situation of the system, x86 is a 32-bit computer, x64 is a 64-bit computer. By default, 32-bit systems are supported, if you don't know whether it's x86 or x64, it is recommended to try 32-bit first.

3. Respect your hand and select the file version according to the software situation. This step is more complicated, if there is the same computer, it is more convenient to copy directly from the computer, otherwise you need to know the computer to guide or try it one by one.

4. Copy the file directly to the system directory

1. Windows 95 98 ME and other systems, copy the DLL to the C: Windows System directory.

2. Windows NT 2000 and other NT systems, copy the DLL to the C: Winnt System32 directory.

3. Windows XP Win7 Vista system (64-bit system corresponds to 64-bit DLL file, 32-bit system corresponds to 32-bit DLL file), copy DLL to C: Windows System32 directory.

4. If your system is 64-bit, please copy the 32-bit DLL file to the C: Windows syswow64 directory.

5. Open"Start-Run-Enter: regsvr32 dll full name, click OK. If you are prompted that the registration is successful, you can do it.

Hello. What should I do if EFI Network 0 for IPv4 Boot Failed is displayed?

In this case, the computer is trying to boot from the network because the computer cannot find the hard disk, or the main boot record of the C drive is corrupted. The English and Chinese meanings of the network startup failed. In this case, the forced shutdown operation is carried out directly by turning off the power supply.

During the warranty period, you can try to follow the steps below to solve this problem, if you can't solve it, it should be the hard disk hanging, and you need to replace the hard disk.

The first step is to try to enter the BIOS, in the information interface, look at the Hard Disk option, if it is not detected or not detected, go directly to the second step.

If the location is a hard drive model, try to restore the BIOS default settings, you can refer to the following for the operation method of restoring the BIOS default settings

1. Restore the factory settings of the AMI BIOS motherboard.

2. How to factory reset UEFI BIOS, UEFI BIOS factory reset.

The second step is to re-plug and unplug the hard disk data cable and the electric suspect source line to ensure that the connecting limb is well touched.

The third step is that the problem cannot be solved, you can try to rebuild the MBR record of the C drive.

If it helps you, please choose the answer that you are satisfied with.