How can the XP system boot up to the desktop at a very fast speed?

First of all, open "System Properties" (right-click - Properties on my computer, or open "System" in the control panel, shortcut win+pause break) click the "Advanced" tab, open "Settings" in the "Startup and Failback" area, remove the two in the "System Startup" area, and if it is a multi-system user, keep the "Time to display the list of operating systems". Click "" to make sure that the additional property of the startup item is fastdetect instead of nodetect, and do not add the noguiboot attribute first, because guiboot will be used later.

The next step is very important, open the "Hardware" tab in "System Properties", open "Device Manager", "IDE ATA ATAPI Controller", double-click to open the "Secondary IDE Channel" properties, click the "Advanced Settings" tab, change the delivery mode of devices 1 and 2 to DMA if available, select "None" if the device type can be selected, click OK to complete the setting, and set the "Primary IDE Channel" in the same way.

Now the startup acceleration has been completed, but since the startup is accelerated, by the way, let's speed up the shutdown as well.

Open the registry (Start-Run-Regedit), click "My Computer" to open "Find" in the "" menu, enter AutoEndTasks, and click "Find Next". Double-click to open the found result, and modify the "Numerical Data" to 1. Then under AutoEndTasks you can find hungapptimeout, waittokillapptimeout, set the "numerical data" to 2000 or less, here by the way, also modify the time of the menu delay, find the menushowdelay below autoendtasks, the value is in milliseconds, if you want to remove the menu delay, set it to 0.

Now that the acceleration of startup and shutdown has been completed, restart the computer to feel the feeling of fast startup, and the scroll bar is OK after only one or two turns.

After enjoying the fun of the fast reboot, we will further speed up the startup, open the "System Properties" - "Advanced" - "Startup and Failback" settings, open the "System Startup" area, and add noguiboot after fastdetect, so that the scroll bar will no longer be displayed at startup. If you really like the scroll bar display, you don't need to do this step.

Close the apps that don't close! No network card installed!

Windows 10 comes with a "Quick Start" function, which allows the computer to boot up quickly. However, there are also some users who will question whether the classic XP system can use the fast start function? Actually, the answer is yes.

Below, Xiao Slippery Dust will share with you the specific method of starting the XP system quickly.

The steps are as follows:

1. Click the start menu, and select "Settings" - "Control Panel" - "Power Options";

2. Click the "Hibernation" tab on the "Power Signal Zen Option Properties" interface, check "Enable Hibernation", click Apply and confirm;

3. Switch to "Advanced", select "Hibernation" in the drop-down menu of "When you press the power button of your computer", click Apply and confirm.

This is the introduction of the method of opening the XP system to start fast. After we operate successfully, as long as we press the power button when shutting down, the computer will enter the sleep state, and when we go to work the next day, we only need to click the power button to turn on immediately.

Get an optimization guru or a super bunny or something like that. 】

Much faster.

Turn off all the software that starts at boot. Then clean up the disk.