-
According to the "Technical Conditions for the Safety of Motor Vehicle Operation":
The motor vehicle shall be equipped with at least one trademark or factory mark that can be permanently maintained and compatible with the vehicle brand on the visible part of the outer surface of the front of the body.
Motor vehicles shall be equipped with at least one product tag that can be permanently maintained, and the fixation, position and type of the tag shall comply with the provisions of GB T18411; If the product label is labeled, the label shall meet the requirements of the general performance, tamper-proof performance and anti-counterfeiting performance specified in GB T25978. The modified vehicle shall have both the modified vehicle product identification and the vehicle (or chassis) product identification before the modification.
-
On the first floor, the answer is just the opposite, and people ask what the letter after the car model means, and you have to be the model number.
The letters behind the model mainly represent the configuration of the model, in accordance with the international general standard:
T stands for turbocharged car e.g. Passat T
l stands for extended wheelbase models such as: Audi A6 L
i is a very early way to encode, such as the Wuling Light 6351 IGT for the road sports car version such as: Polo GT, Porsche GT TDI for turbocharged diesel engines such as Audi A6 TDI, Bora TDI, Jetta TDI
CRDI stands for Turbocharged Common Rail Diesel Engine such as: Huatai Traka CRDI
-
The model letter on the back of the car is gone, which does not affect the annual inspection. The car is marked on not. Generally, the annual inspection is also for the safety performance of the vehicle. The appearance is not very untouched and will not be affected.
The annual inspection of automobiles (or annual inspection of vehicles) refers to the inspection of vehicles that have received official license plates and driving licenses in accordance with the "Technical Conditions for Motor Vehicle Operation Safety" in each cycle. The purpose is to check the main technical condition of the car, supervise and strengthen the maintenance of the car, so that the car is always in good condition, and ensure the safety of the car.
1. Vehicle inspection procedures (individual):
1. Motor vehicle driving license.
2 Motor vehicle compulsory insurance policy.
3 Power of Attorney.
Second, the vehicle inspection procedures (enterprises):
1. Motor vehicle driving license.
2 Motor vehicle compulsory insurance policy.
3. The original or copy of the certificate of the legal person of the unit.
4. Application form of the unit (with official seal).
5 Power of Attorney.
-
OK. The items of the annual inspection do not include the words on the back of the car.
1. Add surrounding.
2. Body color.
3. The color of the glass sun film explosion-proof film should not be too dark (the items in the car can be seen clearly from one meter away; It mainly refers to noodle trucks and trucks, and it doesn't matter if you have a car with less than 5 seats).
4. Vans and trucks should have tail enlargement numbers.
5. The number of spring bow pieces cannot be increased or decreased.
6. The van seat can not be more or less, and there must be a fire extinguisher.
7. The van compartment can not be modified (can not open the side door, can not open the roof, can not add the tail plate) 8, the size of the tire can not be changed, the pattern of the coaxial tire should be the same 9, the vehicle has unprocessed traffic violations, or the vehicle is seized by the court, can not be reviewed annually.
-
If it is only a small area of decals (non-advertising unit name, **, etc.), the area does not exceed 30%, and the annual inspection can be passed (but this 30% Many car owners will have misunderstandings, in fact, it refers to 30% of the plate, such as some car owners, the entire roof is blackened, and the annual inspection is not more than 30%, but the fact is that this is for the roof, the area has reached 100%, this nature belongs to the color change, to go to the vehicle management office to change).
-
It doesn't matter if it's just a word that identifies the car.
-
The car logo must not be deducted!
Other words, letters, toss 、、、
-
Generally not too strict! As long as it does not significantly change the appearance.
ST stands for "Special Handling". The target of this policy is those who have abnormal financial status or other conditions, have the risk of delisting, and hope to be vigilant. >>>More
Hello, there are constant fire wires, ground wires, ACC control lines, reversing control lines, power amplifier control lines, small light control lines, and steering wheels behind the car navigation. >>>More
1. It is the host number, the front is related to the computer configuration, and the back is the machine number, if the last letter is "a or g". m stands for Pentium processor. Lenovo "the first digit after the letter" can tell the screen size of this machine! >>>More
Variable Valve Timing (VVT) is a technology used in automotive piston engines. VVT technology adjusts the overlap time and timing (some or all of it) in the engine's intake and exhaust systems, reducing fuel consumption and increasing efficiency. >>>More
Concave mirrors: Concentrate light.
Convex mirrors: Expand the field of view, e.g. in car mirrors. >>>More