How to weave a round neck, how to weave raglan sleeves

Hello landlord, glad for your question! There are two types of round necks in sweaters, one with a low neckline and the other with a high neck. For turtlenecks, the collar can be left a little higher, and it can be knitted directly at the collar to the desired height; You can also knit the high neck separately and sew it back after weaving.

8-10 stitches can be reserved under the armpit, you can use a ruler to measure it, the front and back are about 3cm, and calculate the number of stitches you knit; 2. Tighten the shoulders. Leave 2 stitches on the side (if the hand is good, you can leave a stitch, this stitch is used for stitching), the 3rd and 4th knitting fishbone needles, the rest of the knitting can be knitted according to the normal pattern, and the needle should be collected in this way when knitting the sleeve, so that after the body piece and the sleeve piece are sewn, a pair of beautiful fishbone needles will appear on the oblique shoulder; 3. Leave a needle on the collar. The collar can refer to the following **, when weaving, weave the back piece, the picture is yellow to represent the back piece, pink is the front piece, and half of the body piece is taken:

Do you want to knit raglan sleeves or normal sleeves, I can introduce you to a**, there are sweater tutorials in it, adults and children have it, you can go and see. If you don't understand, I'm telling you. Wish.

Summary. The steps for knitting a dropped-sleeve sweater to dig out a round neck are as follows: 1. First use a needle and thread to sew a semicircular opening in the front center of the garment from bottom to top; 2. Then use a crochet needle to continuously reciprocate a straight line along the opening from top to bottom; 3. Finally, make a complete circle with the straight line outlined, and complete a complete round neck.

The steps for knitting a dropped-sleeve sweater to dig out a round neck are as follows: 1. First use a needle and thread to sew a semicircular opening in the front center of the garment from bottom to top; 2. Then use a crochet needle to continuously reciprocate a straight line along the opening from top to bottom; 3. After the last number of tremors, the straight line outlined will be made into a complete circle, and a complete round neck will be completed.

The specific steps of knitting a dropped-sleeve sweater to dig out a round neck are: 1. Use a needle and thread to sew a semicircular opening in the center of the front of the clothes from bottom to top; 2. Then use a crochet needle to continuously reciprocate a straight line from top to bottom along the wide mouth of the opening hole; 3. Finally, make a hole in the straight line and make a hole into a complete circle.

The knitting method of the dropped-sleeve sweater digging round neck is as follows:1First of all, Lee sewed a horizontal line with a needle and thread on the shoulder of the sweater as a starting point for digging the round neck.

2.Then, starting from the starting point, sew down the horizontal line, sewing a small round reed at a time until the entire horizontal line is sewn. 3.

Next, at the shoulder of the sweater, a vertical thread is sewn with a needle and thread as the end point of digging the round neck. 4.Finally, starting from the end point, sew upwards along the vertical line of Sun Haochi, sewing a small circle at a time, until the whole vertical line is sewn.

There is a way to weave raglan sleeves, and the specific operation is as follows:

Tools and raw materials: wool, woolen needles.

1. First of all, prepare the wool and wool needle, and use 68 needles for demonstration, and the specific needles need to be used according to the size.

2. Then, distribute the collar on three needles and start knitting. Knit one needle on the needle, and then another needle down. Repeat weaving to the desired length.

3. Start the minute hand, and after the collar is woven, separate the chest, back, and shoulders. Among them, there are 22 stitches in the front chest, 22 stitches in the back, and 12 stitches in both shoulders; Divided into four needles.

4. This step is the key to raglan shoulders, knitting sweater stems. After assigning 4 needles, we began to knit the next needle, each time after the first needle and before the last needle, each circle Qingnian is adding a needle to weave the next needle. The fifth step is to weave a circle of needles without adding or subtracting circles.

5. Knit another circle of needles without adding or subtracting, and then repeat the weaving method of the sixth step. Knit all the way down to the armpits.

6. After knitting to the armpits, thread the two sleeves with threads. The chest and back are connected and knitted to the desired length, and then the knitting is changed to a needle, and a needle is started to weave the edges, and the knitting is to the desired length.

7. Weave two sleeves. For the coil worn with thread, thread it with a needle and start knitting the needle, collect 2 needles every 3-5 rows of loops, and weave to the desired length.

8. Then weave the sleeves, switch to the upper and lower needles, one needle on the needle, and then knit another needle under the needle. Knit to the desired length and retract the needle.

And that's it.

The weave of the raglan sleeve sweater ** is as follows:

1. Prepare enough yarn.

2. Knitting collar 116 knitting single thread, one needle on one needle, a total of 20 circles.

3. After weaving 20 circles, overlap the last row and the first row, and fold it inward and upward.

4. Change the annular needle, and just keep weaving it.

5. The sweater is knitted to the raglan shoulder, and the part with twisted flowers is the sleeve.

6. Divide all the needles of the sweater into four parts, the sleeves on the left and right sides, the front heart on the top and the back heart on the bottom. Now leave the sleeve part to be hungry, first weave the front heart and the back heart, two pieces and weave together. Note that 6 needles should be added separately.

7. Then I kept weaving, and it was all circular weaving circle by circle. There is no need to add or reduce the needle. To weave to the appropriate length, it is necessary to change the double thread, that is, the two needles are scattered and reversed.

Personally, I think this looks better than a single thread, and the elasticity is also greater. When changing the needle, the needle should be reduced evenly, and the number of needles should be controlled according to the need.

The raglan sleeve sweater knitting tutorial is as follows:

1. Count the number of needles

Because this time I knitted a coat, I used an 11-gauge needle and 116 stitches to knit on the neckline. 116-stitch minute hand: Subtract 8 stitches (the 4 tendons used for the raglan sleeve) and leave 108 stitches, divide 108 stitches by 3 to get 36 stitches, i.e. 36 stitches for each front and back piece, and 18 stitches for each sleeve.

Because the front piece should set aside 8 stitches for the placket, the front piece collar part first subtracted 8 stitches, leaving 28 stitches, that is, 14 stitches on the left and right of the front piece.

Second, the official start of the needle

Start with 116 needles - 8 needles placket = 108 needles, and start weaving the collar socket after knitting.

1. Knit one needle first [14 needles on the left front piece and 13 needles left], then add one needle and then knit two needles [one tendon] and then add one needle, then knit 18 needles [one side of the sleeve], add one needle to knit two needles [second tendon] and add another needle. Weave 36 needles [back piece], Jingxin plus one knitting two needles [third tendon] plus one needle. Knit another 18 stitches [another sleeve].

Add one needle, knit two more needles, and add one more needle under the needle [fourth tendon].

2. Knit another needle, [the right front piece collar first knit a needle and there are 13 needles left] After weaving this needle, weave the sweater back to knit, knit the needle, knit to 1 needle and then pick up a needle [there are 12 needles left in the left front piece], after weaving this needle, the sweater is knitted back and knit, along the front of the two needles left under the needle [tendon] continue to add a needle on both sides.

When knitting to 2, pick up a needle [there are 12 stitches left in the right front piece] After knitting this stitch, weave the sweater back and continue the previous method, when there are 7 stitches left in the front piece, the pin becomes 2 stitches at a time, and the remaining 3 stitches are picked up at a time after picking twice, and the front and back of the collar are separated.

At this time, 8 needles are added to the front piece at one time, and the placket part is also knitted. (The reason why the placket is knitted with the body is mainly to facilitate the extension of the sweater in the future, so that there is no need to remove the placket and re-weave.) For the rest, just follow the previous method and add the needle.

3. Pick the armpits

This sweater is ready to knit 250 stitches, when the back piece is knitted to 114 stitches, the sleeves are picked out separately, and 11 stitches (armpits) are added on both sides of the back piece at a time, and the front piece is connected, and the clothes look basically out.

Fourth, weave pockets

Knit to a certain length (estimate according to the length of the body), count the number of pocket stitches, and pick them out. In addition, use a small needle to reach the number of pocket stitches, and then connect them with the clothes and knit them down. Remember to change the needle to a smaller one when knitting to the mouth of the bag, so that the mouth of the bag can be tightened tightly, and the mouth of the bag will not be loose when worn.

Fifth, weave the bottom edge

After the pocket is sewn, the bottom edge is knitted. Change the bottom edge to a smaller needle, put away 20 needles and start weaving the sedan manuscript, weaving 20-25 rows. After the bottom edge is woven, the whole garment is basically formed.

Sixth, sleeves

The next sleeve is much easier to knit, and it is OK to pick up the reserved sleeve needle directly and weave it, but when picking the sleeve needle, you must remember to pick up the 11 needles added under the armpit before.

And that's it.