How to knit children s sweater double breasted access control

Tool: 11-gauge ring needle.

1. The beginning of 146 knitting back and forth flat needles 5 6 rows, then knitting 16 needles flat needles, weaving a single rib in the middle 114 needles, the end of 16 needles, each row of weaving a single rib last needle with the first needle of 16 needles merged, until the end of 16 needles, the collar is completed. (I took 146 stitches, 114 stitches with a single rib in the middle, and when I got to the 10th stitch, the middle part of the collar received 10 stitches at once, so that the collar would be reversed and obedient, and would not shrink up). ps：

Please note that when 146 needles are woven back and forth for 5-6 rows of flat needles, 16 needles are left on each side that are not knitted, but only 114 needles of single thread are knitted back and forth. The last stitch of each row of single ribbing is combined with the first stitch of 16 stitches, until the 16 stitches are finished. Instead of leaving 16 stitches on each side, weave until all the stitches are finished.

2. The collar is woven with more than 104 needles, first of all, the placket part is added with needles, plus 10 needles, after adding, then knit 15 needles of flat needles, and then it is divided into twist parts, remember this dress, no matter how many needles, must be divided into 16 twist flowers (novices can make marks on the twist part), Okay, back to business! Knitting 4 needles (is the number of twist needles) is 2 needles, 4 needles, 2 needles ......The final end is also 4 needles (twist), and then 15 needles (the number of access control needles). The placket 15 is always woven back and forth flat needle, the middle twist part is woven 4 rows of twisting, that is, the position of the 4 needle flat needle is about to start twisting the 8 figures, and the twist 8 characters are on the side of the needle, add the needle, add a needle (I am on the left plus once, the right side plus once, so that it will not be unilateral) ....Twist 8 twists.

3. After the twist is twisted, it is necessary to weave 6 rows of back and forth flat needles, and it should be noted here that two twists (4 needles down, 10 needles, 4 needles) and the middle part of the back body (4 needles down, 10 needles on, 4 needles down) are still woven according to the original needle method. **p413、p414

4. To divide the body and sleeve four tendons, I am divided into (15 + 28) - 2 - 46 - 2 - 58 - 2 - 46 - 2 - (28 + 15), weave 4 rows and 2 places on both sides of each plus a needle, a circle plus 8 needles, add three times, after weaving the body and sleeves separately knit. **p417

5. Start to weave in pieces, and you can also weave separately before and after pieces, according to your preferences. I'm knitting with the front and back bodies. The number of stitches in the sleeve part is strung with a thread.

Knit the body first, and pay attention here, after the sleeves are separated, 8 stitches should be placed at the link between the front and back (that is, 8 stitches should be placed under the sleeves, so that it is comfortable to wear). There are also two twists on the placket side (4 needles down, 10 needles up, 4 needles down) and the middle part of the back body (4 needles down, 10 needles up, 4 needles down) and the two sides of the back body I put once every 12 rows. Knit to the required length, and finally weave back and forth flat needle buckle, OK.

**p418、p419

6. Knitting sleeves is much simpler, add the number of needles (8 needles under the armpits) pick 8 needles under the sleeves, weave until the required length, and finally weave back and forth flat needles to close the buckle, OK.

Cardigan sweaters are more difficult to knit than other crewneck sweaters, and the key to the difficulty is the placket part, which will cause the connection part to be uneven, and eventually cause the whole sweater to twist and wrinkle very ugly. The reason why the same method is always bad is that there is a lack of skill. The following is an introduction to the placket weaving skills.

The placket knitting technique of hand-knitted cardigan sweater 1: In order to avoid the phenomenon of pumping and wrinkles after the placket is knitted, we can use the whole weaving method, that is, when knitting the body, the placket part is knitted together. When knitting the clothing piece, leave the number of needles on the placket at the front, generally leave 10 needles appropriately, and when knitting these 10 needles, use 4 rows of flat needles to knit 2 rows of reverse needles.

Such a method is suitable for beginners.

The placket knitting technique of hand-knitted cardigan sweater is two: pick the needle knitting method. On the edge of the knitted piece, pick the needle from the 2nd needle at the braid, and pick the 3rd needle at the 4th needle to complete the picking.

Re-use the sweater needle to press the number of needles, knit 4 needles and 2 needles, a total of 10 rows. Then knit a row of flat needles from the pick needles on the piece of clothing, and sew the placket with the method of combining needles, using double-threaded needles. The placket is very flat after being sewn together.

Four rows of three stitches are generally good for single ribs, double ribs because of greater elasticity should be good, you can pick four stitches in four rows.

After weaving, you can use a steam iron to scald it to make it smoother.

AI Alas, how do you say it? You do the same as you do, and when you get the second shot, you take the first shot and insert the second shot. This is the case until the end.

Step 1: Divide all the stitches;

Step 2: Set aside or retract about 3cm of stitches from each of the two ends or two tails after parting. (The aim is to wear it without restraint when reaching out).

Step 3: Collect the armpits: 1) Knit the first and second rows of the tail needle and remove 1 needle;

2) weave the third six rows, each of the tail needles to remove 2 needles;

3) After each weaving row, the tail needle will be collected by 1 needle;

Stop the needle when you receive enough width for the back or front body, and then knit to a certain length to close the back collar or front collar.

Knit first and then piece, start to weave the edge (up and down the needle) about an inch and a half, start to weave a flat needle (weaving flowers need to read the book to pick the pattern), weave enough 1 foot 2 to start the sleeve cage, first flat 8-10 needles, and then reduce one needle per circle, minus 3-5 needles (according to the fat and thin different adjustments) and then continue to weave about 7 inches; Start to weave the front piece and the back piece is the same as the back piece, just start the back piece of 1 2 plus 10 needles of the number of needles, and then weave another front piece after weaving, the number of needles is the same, pay attention to the opposite direction when dividing the sleeve cage. After the clothes are woven, start to knit the sleeves: first start 15-20 needles, add a needle on each side of each row, add about 85-90 needles, level up 10 needles to weave the sheet into a cylinder, reduce the needle every 5 rows or so, knit to the elbow every 10 rows or so and then reduce the needle, weave enough sleeve length difference of one inch to change the knitting of the upper and lower needles (edge), close the edge.

Hang a stitch before the first stitch and then knit the first stitch; Hang one more stitch, knit a second stitch, hang another stitch. This is a mobile phone that did not send a picture. Let's take a look at the simple drawing. Indicates the original two stitches. *Indicates the addition of needles. As shown in the figure:*

Add needle, in the middle of the two needles with the index finger around the needle, also known as "finger plus needle", so that the needle will be relatively flat, can not be seen, there will be two such needle methods in the book, one is (finger plus needle), one is o (empty needle: directly winding a needle).