Unable to receive the Tengda wireless router network

If the laptop wants to use a wireless network, first of all, there must be a wireless router or a wireless network card to do a soft AP, if you have a wireless router at home is Tengda, you can set up the router according to the following steps, after setting, the laptop can use the wireless network.

Here's how to set up your router:

1. Line connection:

a.Connect the network cable from the cat to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1, 2, 3, 4).

b.Connect the broadband cable to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1 2 3 4).

2. Log in to the router interface.

In the browser, type: Enter, enter in the pop-up page: admin and click "OK".

3. Set up the router to surf the Internet.

Before setting up the Internet access, choose the correct Internet access method: Generally, there are three types as follows:

ADSL dial-up: Usually to access the Internet (when not connected to the router) need to click on the broadband connection, dial-up is successful before you can access the Internet, you should choose the Internet mode, Internet access and Internet password correctly enter the broadband and password, you can.

Automatically obtain an IP address: If you usually surf the Internet (when you are not connected to the router), you only need to set the local connection of the computer to automatically obtain the IP address to access the Internet, you should choose this Internet access method.

Static IP: If you need to fill in a fixed IP address in the local connection to access the Internet (when you are not connected to the router), you should choose the Internet access method, log in to the interface of the router, click "Advanced Settings" - "WAN Port Settings" to select the static IP mode "Static IP Mode", and enter your fixed IP address, subnet mask, gateway, DNS domain name server and other parameters correctly.

4. After setting, click "Advanced Settings" - "System Status" to check whether the connection status of the WAN port shows that it is connected, and whether the corresponding connection mode is displayed correctly.

The corresponding connection mode for ADSL dial-up is: PPPoE

The connection mode corresponding to the static IP address is the static IP address

**The following is how to set it up

If your router cannot connect to the Internet, please log in to the router interface, click "Advanced Settings" - "System Status" to check the connection status of the WAN port connection, please check the following troubleshooting methods according to your WAN connection status:

The WAN port displays the solution to the failure of the connection.

Problem 2: The WAN port displays the solution to the fault in the connection.

Question 1: The WAN port is connected but cannot be connected to the network: Fault solution 3

Set up the router again

If the wireless router can't be used, you can check whether the wired can be used first, sometimes it's just a network disconnection or network problem, and it is not necessarily a problem with the wireless router; If the cable can work, then please see the following steps to eliminate:

Exclusion Steps: Section.

1. Log in to your router, check whether your wireless settings have been activated, and see whether the checkmark in front of the wireless settings is checked in the wireless settings on the router management page; If it is checked, it is turned on, and if it is checked, it is not opened;

Clause. 2. If you don't tick it, please check it and restart the router; Reboot the router: Restart the router in System Tools;

Clause. 3. If it has been checked, then you can choose to reset the router; Reset the router in the router's system tool to factory reset or in a small hole in the back of the router and press and hold for 10s to reset automatically.

If your router cannot connect to the network after setting, please log in to the router interface, click "Advanced Settings" - "System Status" to check the connection status of the WAN port connection, and check the following troubleshooting methods according to your WAN connection status:

The WAN port displays the solution to the failure of the connection.

The WAN port displays the troubleshooting method in the connection.

The WAN port shows that it is connected but cannot connect to the network.

Restore the factory settings, and the reset settings are OK. (Wired broadband can be plugged into the computer) is it directly connected to the computer, or is the cable connected from the router to the computer, the router can not be used wired and wireless?

When you say wired broadband plugged into the computer, do you mean plugging in the computer from the unlimited router or plugging in the computer from the cat?

If you plug in the computer from the Infinity Router and use it, it means that there is a problem with the Infinity signal, you can turn off the power of the Infinity Router and wait for a few minutes to turn it on to see if you can access the Internet.

It is estimated that it is dead, the heat dissipation is not good, restart.

You are not connected by mistake; The network cable connects to the WAN port of the wireless router;

Check whether both ends of the network cable are connected to the correct port and plugged in tightly (after the line is connected correctly, the WAN port indicator on the router should be solid or flashing).

2. The quality of the network cable is too poor or damaged.

Type :

WAN port rate control in the advanced settings", select "10M full-duplex".

Modify the WAN port rate to 10 Mbit/s full-duplex.

There may be an incorrect connection, and the network cable is connected to the WAN port of the wireless router.

Workaround:1Check whether both ends of the network cable are connected to the correct port and plugged in tightly (after the line is connected correctly, the WAN port indicator on the router should be solid or flashing).

2.The quality of the network cable is too poor or damaged, and try to change the network cable.

3.In the browser, type: "WAN port rate control" in the advanced settings in the upper left corner of the page, select "10M full duplex", and modify the WAN port rate to 10M full duplex.

1. First of all, see if it is a connection error; The network cable connects to the WAN port of the wireless router; Check whether both ends of the network cable are connected to the correct port and plugged in tightly (after the line is connected correctly, the WAN port indicator on the router should be solid or flashing).

2. If the quality of the network cable is too poor or damaged, try to change the network cable.

3. Enter in the browser: "WAN port rate control" in the advanced settings, select "10M full duplex", modify the WAN port rate to 10M full duplex, and finally see if it can be connected.

Tengda router can not access the Internet normally after setting, you can troubleshoot and solve it as follows: