How to clean carpet stains by yourself, how to clean carpets

Carpets are the most likely to get dirty in a car, and if you use a vacuum cleaner with a brush head to vacuum it, you can make dirty carpets look less dirty. For more dirty carpets, you can only use special detergents. Generally, the above two dust removal work is carried out before using detergent, then spray an appropriate amount of detergent, scrub it with a brush, and finally use a clean rag to absorb the excess detergent, so that the washed carpet can be clean and as soft as before.

The most important thing to pay attention to is that the carpet should not be completely soaked and brushed in water, on the one hand, it will destroy the bonding of several layers of different materials inside the carpet, and on the other hand, it will make the carpet not dry for a long time and affect the use effect, causing dampness in the car. Another important part of the interior of the car is the instrument control board that every passenger will face directly, its cleanliness is the most important feeling of whether the car is clean, due to the complex structure, many corners and corners, various switch instruments, etc., make it more difficult to clean. Pay a little attention to the dashboard and you will find that there are very few parts that can be cleaned with only a rag and sponge, and these ditches and bumps need to be used "special tools", in this case, the "special tools" designed by themselves can come in handy, with a variety of wood chips or rulers of different thicknesses, its head is repaired into oblique triangles, rectangles or pointed shapes and other different styles, and then wrap it in a clean rag to clean the ditches and ditches, which is the most ideal thing, which improves the cleaning effect. At the same time, it will not cause damage to the area to be cleaned.

Hello, cleaning the carpet is easy is difficult to remove water, I clean the carpet with a carpet cleaning machine, very easy to use, first use the machine + detergent to brush clean, and then use the suction head to absorb the water, can suck out all the residual dirty water. Just let it dry for a while and it will dry completely. Depending on the type of stain, choose a combination of detergents to remove the stain quickly.

If you want to clean carpets or seats frequently, you may want to consider buying a Dwyllake.

Which small brush to brush shoes with a detergent brush, and then toilet paper to suck out the dirty water.

Introduction: The carpet has been used for a long time, or the carpet is accidentally dirty, and then the carpet cleaning has become a troublesome problem, how do we clean the carpet? Let's find out with me

1. Powder cleaning agent

The powder is sprinkled on the carpet, and then brushed with a brush, and vacuum is carried out, this method can pass on the carpet soon after washing because it does not use water, but the washing power is poor.

2. Spray cleaning

Spray the cleaning agent on the carpet and wipe it with a foam pad to absorb the stain, this method uses less water, and it can be passed in a short time after washing, which is not very suitable for wool carpets.

3. Warm water absorbs stains

Using an instrument with a nozzle and vacuum, warm water with cleaning agent is sprayed onto the carpet and immediately vacuumed, which is easy to operate and does not damage the pile.

5. Clean without waterless dry powder

Using a washing machine combined with dry cleaning powder, and then sucking the dirt on the surface of the carpet into the dry cleaning powder, a comprehensive cleaning will cause minimal damage to the carpet.

6. Wash the carpet in different places separately, and do not swallow dates and wash them together.

Because it's different'Use different cleaners for stains. For example, edible oil stains should be cleaned with carbon tetrachloride solvent, shoe polish stains should be cleaned with gasoline, and so on.

7. When cleaning the carpet partWipe from the edge of the stain and quickly move closer to the center of the stain, and do not wipe it from the inside out, which can easily lead to the spread of the stain.

8. Steam sauna carpet cleaning.

Use a special steam sauna carpet cleaner to turn the water into a high temperature of 200 Fahrenheit, and use high temperature and high pressure to separate the dirt and disinfect the carpet at high temperature.

9. For egg whitesCleaning of fats such as milk should be done with warm water and detergent, followed by the use of a special volatile degreasing agent to remove the fat.

1.Prepare the room to be vacuumed. Pick up any toys, paper, or other objects that are obstructing the passage of the vacuum.

Inspect small items such as coins that may damage the institution. Remember to look at the furniture first stain the blinds, furniture, window sills and baseboards. The falling dust can then be vacuumed.

2.Use the nozzle attachment to clean hard-to-reach areas. The edges of carpets and skirting boards often collect dust that should be removed first. If the furniture can't be moved, use the crack extension to reach underneath the couch and other parts to remove the dust bunny.

3.Horizontal and vertical vacuum. Start by vacuuming the entire room forward and backward, then repeat the process from left to right.

Carpet fibers are usually twisted, and by going in both directions, you can be sure that every part of the fiber has been reached. This is especially useful if you have a pet, as it removes dander and hair.

4.Vacuum frequently. How "regular" is depends on several factors.

In general, it is recommended to vacuum at least once a week or about 20 pounds per person for pets. For example, a couple with two cats should vacuum three times a week. A 60-pound dog should be vacuumed four times a week.

Keep in mind that one of the main reasons for vacuuming is to remove hair and dandruff. Large pets usually produce more pets as compared to smaller pets. If your carpet is visibly stained with dirt or pet hair but can't be cleaned, forget about this rule of thumb more often and the vacuum.

Carpet is an indispensable decorative material for home decoration and beautification of the space environment. Carpets are widely used for indoor floor decoration because they have a variety of colors, soft textures, comfortable feet when walking, and have the advantages of moisture-proof and dust-wicking.

When using carpets, it is necessary to vacuum them once a day to keep them clean. If not, it will cause discoloration and deterioration on the surface of the carpet for a long time, and it will be too late to clean it once there are local mildew spots.

The difference between a higher grade decorative carpet, carpet and elastic floor, wood floor and stone floor is that the latter is a two-dimensional ground with only length and width, while the former is three-dimensional, in addition to length and width, there are shades, the carpet surface is composed of many individual fibers or wool, each fiber has its own surface, these increased surfaces produce the following two results, one is that the carpet has a larger pollutable area than the flat ground; The second is that stains can penetrate into the third depth of the carpet. As a result, carpets are able to adhere to more dirt than floors. These make the carpet require cleaning care with special methods.

Different kinds of carpets have different cleaning methods and cleaning cycles. To properly care for your carpets, you must have good professional knowledge and develop and implement a complete cleaning plan.

Each cleaning procedure has the following 4 main phases:

1.Vacuum daily with a roller brush to absorb the floating dust on the carpet surface as soon as possible to prevent dust from being deposited between the wool fibers. The rolling brush not only combs the carpet, but also picks up floating dust and more adhesive dirt to absorb it, so the cleaning effect is better than simply vacuuming.

2.Stains are removed instantly, new stains are the easiest to remove and must be removed in time. If the stain dries or penetrates deep into the carpet, it will cause long-term damage to the carpet.

3.Regular mid-term cleaning, frequently walked carpets need to be equipped with a foaming box, and regular mid-cleaning with the dry foam cleaning method to remove sticky dirt and keep the carpet as clean as new.

4.Deep cleaning, once dust is deposited deep in the carpet fibers, it must be deep cleaned by the extraction method to restore the carpet to its original bright cleanness. Carpets that are sensitive to water can be cleaned with dry foam instead of extraction.

The above 4 cleaning methods are effective ways to protect your carpet on a daily basis and prolong its lifespan. These methods have good effects on pure wool, chemical fiber and other carpets.

Method 1: Wash with vinegar and warm water.

Place the rug in a larger space. Prepare a basin of warm water, put some vinegar in the warm water and mix it, wipe the carpet with a soaked and wrung out towel, and hang the carpet to dry after all-round cleaning, and then you can remove all the stains.

Method 2: Salt and soapy water to remove the stain.

Salt has an adsorption effect, we can start by sprinkling some salt on the carpet to let it absorb stains. After that, prepare a basin of soapy water, moisten the water with a broom, sweep the carpet, and then dry the carpet to remove the dust.

Method 3: Borrow a vacuum cleaner to remove dirt.

Vacuum cleaners are a good helper for environmental protection at home, and we can use the vacuum cleaner regularly to remove dirt along the texture of the carpet. In this way, you don't need to spend too much effort to clean the carpet, just a simple wipe with a wet towel, which not only saves time and effort, but also cleans up impurities in the carpet.

Use a special carpet cleaner to scrub the stains on the carpet, and the more stubborn stains can be cleaned with warm water and vinegar to help clean, and the stain removal effect will be better! It should be noted that carpet cleaning needs to be vacuumed before and after cleaning, as well as small lint and dander on the carpet, especially long-haired carpets, which should be vacuumed frequently.

Carpet cleaning method:

1. Prepare the carpet cleaning tools first.

2. Pour the carpet liquid into the water at a ratio of 32:1 and pour it into the water tank of the cleaning machine. Then follow the procedure of first inside and then outside to clean backwards, pay attention to the connection along the wall and the connection, generally the width of the machine overlap 1 3.

3. Find out the seriously stained parts of the local carpet, moisten it with a strong stain remover with water for about 5 minutes, then use a hand brush to narrow and wipe it according to the steps from the outside to the inside, and then use a wet towel to pick up the stains, and repeat about 5 times.

4. Dry the carpet with a hair dryer or pave it with a white cloth sheet.

5. After all the cleaning is completed, put away all kinds of tools.

It should be noted that carpet cleaning should be sucked with a vacuum cleaner before and after cleaning to suck away dust and dander. In addition, wool carpets are best dry cleaned. When you are not clear about the carpet cleaning steps, it is more reliable to ask a professional carpet cleaning team!

With the development of the economy and the improvement of living standards, carpets have gradually entered the home, and carpets will naturally continue to be sent to laundries for washing. There are both pure wool carpets woven from wool and chemical fiber carpets woven with acrylic or polypropylene. Chemical fiber carpets can generally be washed with water relatively simply, especially polypropylene carpets as long as they are brushed with low-concentration detergents, and then fully rinsed with water.

And the washing of pure wool carpets is a bit particular. Since most of the wool threads used to weave carpets are traditional dyeing, the dyeing fastness is relatively low, so alkaline laundry detergent should not be used to wash wool carpets, and neutral washing machines can be used, and not excessively. Rinse thoroughly with water before formal washing, and rinse thoroughly.

When washing, it should be brushed evenly, the action should be fast, and it should not be parked. Then rinse thoroughly with water. Finally, a single fix should be done with water containing glacial acetic acid.

The drying process of the carpet is also important. First of all, the carpet should be gradually tightened to squeeze out a large amount of water, and then the rolled carpet should be placed upright on the ground to control the water, and it can be hung up to dry when the water no longer continues.

When the carpet is dried, the parts with the tassels turn yellow and need to be treated. Bleaching method: Use 40% of 3%-5% hydrogen peroxide to brush the spike part, wait until the color changes, and then rinse repeatedly with water.

Vacuum or rinse with high-pressure water.