Do range hoods need to be fitted with check valves? How many do you want to pack?

Yes, pack one. This can prevent fumes from other homes from running into your home, just one pipe can be installed.

For range hoods, check valves must be installed, so as to effectively prevent the backflow of oil fumes in the public flue and make the kitchen free of oil smoke odor. The function of the check valve is to prevent the backflow of oil fumes, and the design only allows the flow in one direction, preventing the air flow in the opposite direction. For range hoods, it is usually necessary to use 2 check gates.

A check valve is required. Generally, according to the distance between the range hood and the flue, it is decided to install a few. If it's close, you can install one, and if it's far away, you can install two or three.

Yes, if you install it at home, basically 2 are enough, and it's a bit of a waste to have more.

When installing the range hood, the check valve must be installed, because the ventilation duct of the range hood is connected to each household, if the check valve is not installed, the oil smoke of other people's homes will flow back to their own homes, causing a lot of environmental and air pollution, which is very bad.

When installing the range hood, install a check valve. Because if it is not installed, the oil smoke will be backfilled, and the discharge will not be clean.

Yes, because after installation, sometimes there are problems due to the environment and other places, we can deal with these aspects in time, and the range hood lives in a better quiet and comfortable place for us.

Range hood check valve installation steps.

1. The kitchen auxiliary flue must be retained. Each kitchen has a flue, and at the same time, the flue is also divided into main and secondary, the main flue runs through the entire building, and the auxiliary flue is relatively independent.

Generally, the oil smoke in the home will first go to the auxiliary flue, and then enter the main flue through the hole in the partition, so as to ensure that the oil smoke of each household is isolated. However, if the secondary flue is directly connected to the main flue, the pressure will be too low, resulting in back-up or cross-smoke.

Second, pay attention to the details of installation and construction.

1. It is very important to choose the location where the range hood is installed, and the shorter the pipe, the better. Some owners will stretch the pipe longer for the sake of aesthetics, so that after turning off the range hood, a lot of oil smoke will accumulate in the pipe and cannot be discharged, and then poured back indoors. The flatbed body design is simple and stylish.

However, it is not suitable for frying, stir-frying, cooking, and frying cooking forms, because the smoke hood is too shallow or there is no smoke hood at all, and the oil smoke that cannot be smoked away is serious and spreads seriously. To solve this problem, it is recommended to change to a deep hood type range hood.

2. In order not to destroy the original main and auxiliary flues, the opening direction of the range hood can not be changed at will, and it must be played in the auxiliary flue.

3. The kitchen smoke exhaust and anti-reverse valve should be replaced frequently. If the auxiliary flue has been removed, or if it is better to prevent the back-up of smoke, then use the flue check valve. Under normal circumstances, the effect of the check valve of the range hood is not very obvious, and the installation of the check valve in the flue can protect the range hood, so that the smoke in the flue will not be poured into the pipe and the range hood.

However, after installing the check valve, it should be cleaned regularly, otherwise the check valve will be open and lose its effect, and the flue check valve should be replaced once every two years or so.

About range hood check valve.

The range hood check valve is also called the name of air outlet, exhaust outlet and air hood, etc., it is the range hood comes with, the bottom is fixed on the top of the range hood with screws, and the upper part is connected to the plastic telescopic smoke pipe.

There are generally two baffles inside the range hood check valve, but because the traditional smoke check valve has the problem of the baffle is not tightly sealed (no matter how high-end the hood), there is a problem of the range hood smelling back.

The range hood check valve of different brands or models of hoods is likely to be different, and there is no unified industry standard. However, the caliber of the plastic retractable smoke pipe is basically divided into four types: 18cm, 17cm, 16cm and 15cm.

The check valve can be installed directly to the air outlet of the range hood.

The length of the smoke exhaust pipe is calculated as the nearest straight line distance from the top of the smoke machine to the public flue mouth, and it should be noted that the vertical length (the length of the pipe pipe to the transverse direction of the smoke pipe is also added), and the length attached to the general smoke machine does not exceed 2000mm, which is enough to meet the normal needs. If this length is not enough, and you want to ensure the smoke exhaust effect, you can install a relay device between the two smoke exhaust pipes, which is an air supply device to ensure the overall exhaust capacity.

Refer to the manual, the mechanical structure is very simple, the tool screwdriver is done.

When the smoke machine is only issued, how to install the most expensive smoke machine without anyone telling you? You follow the instructions, and the contemptible person tells you that it's okay.

The installation of check valves for different smokers is not the same, depending on which one. It's not hard.

The check valve can be installed directly to the air outlet of the range hood.

It is recommended to give me the mailbox, I can send this Quartet to your mailbox, or you can listen to the past to help you install.

Generally, when you buy a range hood, you come with it, and you don't need to buy it yourself. The check valve, also known as the flue check valve, is one of the components that are matched with the range hood. It is generally used in the exhaust flue of the range hood at home, including the range hood check valve, plastic telescopic smoke pipe and flue check valve.

The range hood check valve is also called the name of air outlet, exhaust outlet and air hood, it is the range hood comes in, and the bottom is fixed on the top of the range hood with screws.

Yes, it must be installed, it can prevent the kitchen fumes from flowing back into the room, but also prevent external black ash or insects from entering the kitchen, and also prevent the hood from clogging.

It is necessary and so that the environment is safe and does not allow the fumes to return to the room.

It is useful to prevent the fumes from returning directly to the home, and the fumes can be smoothly discharged outdoors to ensure the cleanliness of the kitchen.

It is still necessary to install this return valve, which is mainly to prevent the oil smoke from flowing back, not to let the oil smoke return to the home, and to make the kitchen cleaner and more hygienic.

It is necessary to install a check valve, because we will turn off the oil smoke after smoking, in fact, it is this function.

Hello! The check valve installed vertically on the new return scale of the range hood can still be used when removed. The check valve on the range hood is generally not sealed, and it is useless, and it will still pour smoke.

For example, the check valve on the Fotile range hood is not sealed, and it is still sticky to the oil stain after a long time, and sometimes the range hood can only be opened after a while. Therefore, Fotile has produced another check valve, and many range hoods have dismantled most of the leaks after installing the check valve.

Boss range hood check valve.

You can do without a special one, as long as you use the appropriate model, but to avoid unexpected situations, it is best to use a special range hood check valve.

Kitchen hood. The check valve is composed of two parts: the valve body and the movable valve, which are generally installed at the air outlet of the range hood, which can effectively prevent the flue gas backflow of the flue.

Range hood is a kind of range hood, which belongs to a kind of modern kitchen equipment, and can be called an exhaust hood.

Or a range hood. Its biggest function is to extract the fumes generated during the cooking process, and at the same time can provide lighting, remove vapors, and some undesirable odors. Range hoods simply circulate exhaust gases back into the kitchen, and when cooking on high heat, they cannot reduce indoor air pollution.

Yes, the smoke pump must be installed with a check valve, so the basis for installation is that the smoke is to discharge the smoke outside, if it is not installed, the smoke will return to the room, which means that the smoke machine is installed and does not work.

The first point, the range hood must be installed with such a return valve, so as to ensure the normal operation of the range hood, the second point is to install this return valve, you will find that the life of the range hood will be extended, the third point The most powerful basis is not to install the return valve, you will find that the sound is very loud when you use it.