In the kitchen, install the ceiling first or install the range hood first

It will be easier to install the ceiling first and then the hood.

If the range hood is installed first and then the ceiling, then the pipe of the range hood and the exhaust pipe of the water heater need to be installed first, and it is also necessary to do a good job of concealment in advance before the installation of the gusset. Of course, the ceiling can also be installed first, because the ceiling with aluminum gusset square lattice needs to be removed from the installed part for installation and hiding in the later stage. Relatively speaking, it is more convenient to install the ceiling first and then install the hood.

When most people decorate the kitchen, they will first install the kitchen ceiling, and then install the range hood, so it is not impossible, but whether it is an integrated ceiling or an aluminum gusset ceiling, when installing the ceiling, we must first determine the location of the smoke pipe. And in order to cover the ugliness, it is also necessary to hide the flue pipe, so that when connecting the hood pipe pipe, it is necessary to remove part of the ceiling for drilling, which is a bit troublesome to operate.

Install the kitchen ceiling first. The user needs to install the kitchen ceiling first, and then remove the corresponding gusset when installing the range hood. Install the ceiling first, of course, you can pre-install the smoke pipe at the same time as installation.

There is no problem with this, even if the ceiling is installed after the installation of the smoke machine, because the gusset is a small piece, so each piece can be removed, and when the installation is carried out in the later stage, the master will take down a small piece directly above according to the installation position of the smoke machine, and draw a circle to walk the smoke pipe so that it is more beautiful.

Precautions for kitchen ceilings.

During construction, waterproofing coatings.

PVC sheet and aluminum-composite panel.

It is a material commonly used in kitchen ceilings. The kitchen is the key fire prevention object in the family, so for the safety of the family, the fireproof material must be selected when selecting materials, and the fire performance of the aluminum-plastic panel is not good, and it is easy to deform after a long time, and the advantage of the aluminum-plastic panel is that it is easy to clean.

When decorating, I often focus on waterproofing the toilet, but ignore the waterproof performance of the kitchen. The kitchen is also a place that is prone to water leakage, and because of the constant water vapor.

It will make the ceiling corrode, so the waterproof coating must be used well.

The above content refers to Encyclopedia - Kitchen Ceiling.

People's Daily Online-Ceiling decoration should not be overly decorated.

Install the ceiling first, of course, you can pre-install the smoke pipe at the same time as installation. There is no problem with this, even if you install the ceiling after the installation of the smoke machine, because the gusset is a small piece, so each piece can be removed, and later in the installation, when the master will take down a small piece directly above according to the installation position of the smoke machine, and draw a circle to walk the smoke pipe so that it is more beautiful.

Install the ceiling first, and then remove the corresponding gusset when installing the electrical appliances.

Ceiling misunderstanding: Myth 1: Installing a ceiling is enough grade.

In fact, due to the fact that the floor height of commercial housing is not as good as before, it is usually only meters. Installing a suspended ceiling in such a relatively small space can visually make people feel nervous and depressed, which in turn will cause some physiological reactions, such as dizziness and nausea.

Myth 2: The uneven shape will highlight the owner's personality. When some people install the ceiling, they will design uneven shapes, or use glass, mirrors and other materials, which brings difficulties to the usual cleaning, making the ceiling a place to hide dirt and dirt, thus polluting the indoor air environment.

This is especially true in the northern regions, where the wind and sand are heavy and the dust is high.

Myth 3: Colored light sources can create a good atmosphere. Many homes will install some colorful light bulbs when they hang their ceilings. In fact, these bizarre feelings are not suitable for ordinary families, and abuse can easily make the room look impetuous, destroying the warm and harmonious mood.

Suspend the ceiling first, and then remove the corresponding gusset when installing electrical appliances.

If the smoke pipe is in the ceiling, it is not too late to install the smoke pipe first, install the cabinet and then install the smoke machine.

I'm sure it's going to be a ceiling. The kitchen should be roof with the ducts of the hood machine and the exhaust pipe of the water heater.

And the floor pipe of the range hood must be reserved long enough, otherwise it will be troublesome if the range hood cannot be connected at that time. Under normal circumstances, after the ceiling is installed, the exhaust pipe position of the range hood and water heater should be reserved.

The decoration of the house needs to be carried out in accordance with certain steps, otherwise it will affect the construction progress and effect in the later stage, even the kitchen is no exception. It is best to install wall cabinets first. As long as the size and style of the range hood can be determined first, the corresponding space is reserved, and then the hanging cabinet is installed, the corresponding trouble can be reduced to a certain extent.

The bottom plate of the hanging cabinet above the range hood should be larger than the top surface of the range hood. When installing, remove the upper hanging cabinet bottom plate first, and then install the hanging cabinet bottom plate after installing the range hood, which will be more convenient.

Install the fume extractor pipe and water heater exhaust pipe first, and do a good job of concealment before installing the gusset. This is the renovation process. But that's not to say you can't install the ceiling first.

Even if you finish installing the gusset, when you install the hood later, because the gusset is square, each piece can be removed, remove the stop directly above the hood, draw a circle, and walk the pipe, which will be more beautiful.

When decorating the kitchen, it is recommended to install the smoke pipe of the range hood first, and the concealment must be made before installing the ceiling. This is the renovation process. But that's not to say you can't install the ceiling first.

Because it is an aluminum gusset grid ceiling, it is assumed that the ceiling will be installed first, and part of the hidden pipe needs to be removed later. So it takes a little more trouble. Kitchen ceilings, range hoods, gas stoves, water heaters, and cabinets are close to each other or even staggered.

These products come from different merchants and masters. If you want to get a beautiful advantage, you need coordination and cooperation from all sides. As for installing the ceiling first and then installing the cabinet, the main purpose of installing the ceiling first and then installing the cabinet is to prevent damage to the cabinet when installing the ceiling.

After the ceiling is installed, the wall and floor tiles are paved, it is best to leave the installation space of the cabinet, and the construction of the workers will be more assured, otherwise it will hinder the construction of the cabinet, and the construction will definitely be inconvenient and slow down the construction period.

It must be to get the ceiling first, and then install the relevant range hood, these are the later steps, you need to paint the wall, and you should go to the ceiling after brushing the wall.

When decorating the kitchen, you must first make a ceiling, and then make a ceiling hood, otherwise you will not be able to install a ceiling hood first.

Under normal circumstances, the wall cabinet is installed first, and then the range hood is installed, which can be more beautiful and can better determine the height.

Wall cabinets should be installed first. This avoids wall cabinets and range hoods that are not suitable and would otherwise need to be reworked.

A top-suction range hood should be installed first. In this way, when installing the wall cabinet at a later stage, you will not feel troublesome.

Install a top-draft range hood first, as it is easier to install and convenient.

Of course, the ceiling cabinet is installed first, and the decoration company does this, and no one installs the range hood first, and there is a sequence in doing everything.

Before the text begins, let's make a multiple-choice question: what should be installed in the kitchen decoration first? a.Install the ceiling first bInstall the range hood firstAll of the above.

Are you sure of the answer to this question? If the order of kitchen decoration is wrong, the difficulty of later decoration can increase. The most common kitchen ceiling is the aluminum gusset, the aluminum gusset is simple and direct, so when the kitchen is decorated, is the aluminum gusset installed first, or the range hood is installed first?

1.I choose a large kitchen appliance.

Refrigerators, range hoods, stoves, water heaters, etc. are all major kitchen appliances, and the placement and size of major appliances directly affect the customization of cabinets, so the first step in decoration is to choose a good kitchen appliances.

2.Choose a cabinet custom manufacturer and make a good kitchen water and electricity diagram.

The kitchen water and electricity diagram is essential, such as some embedded electrical appliances, which need to reserve sockets in the cabinet, and for example, the refrigerator needs to be wired separately, so that the whole house does not need to be powered off when going out, these details need to be reflected in the kitchen water and electricity diagram.

3.Hydropower, tiling completed, cabinet manufacturers re-ruler.

After the water, electricity, floor tiles, and wall tiles in the kitchen are completed, it is necessary to contact the merchant of the custom cabinet, let their designer come to the door, and then make the final design drawing of the custom cabinet, and arrange for the manufacturer to start production.

4.Aluminum gusset mounting.

The installation height of the aluminum gusset plate will generally be designed in advance, and when the cabinet factory is re-ruler, it can be calculated according to the height of the preset aluminum gusset installation. If you're worried about making a mistake, you can also reverse the order of steps 3 and 4.

Two points to note::

The aluminum gusset plate facing the smoke pipe of the range hood and water heater can be left without installation first, and when the range hood and water heater are installed in the later stage, it can be easily taken down, and the smoke exhaust orifice can be opened, and finally the mouth can be installed more perfectly.

If the range hood is to be wrapped in a wall cabinet, you can cancel the position of the smoke exhaust pipe with an aluminum gusset, which is convenient for installation and later maintenance.

5.Cabinet installation. The cabinet installation is arranged after the kitchen water, electricity, wall and floor and aluminum gusset ceiling are installed.

6.Installation of range hoods, stoves and water heaters. In the final step, install the range hood, cooktop, and natural gas water heater.

The life we yearn for is one room, two people, three meals and four seasons, and the kitchen is full of family affection and the smell of rice. Follow this step to decorate the kitchen, it is not easy to make mistakes, and it is not bad in the later stage!

I think it should be installed first, measure the position that needs to be reserved when installing the hanging cabinet, and then buy the range hood after installing the wall cabinet, and install the range hood in the reserved position.

The wall cabinet should be installed first, so that there is a certain space to measure the size of the range hood, and it is more convenient to install the ceiling first and then install the range hood.

It should be installed first with a wall cabinet, and then with a top-suction range hood, which will be more beautiful.

<> "First, the ceiling first or the range hood first.

The kitchen should be suspended first and then installed with a range hood, so that the aluminum gusset of the kitchen ceiling can be opened later, and the hidden flue pipe of Hu Liangji is very good. If the range hood is installed first and then the ceiling, the construction of the ceiling will be affected because the smoke exhaust pipe is not reasonably arranged. If the gusset plate is not disassembled, if the concealed projects such as the embedded smoke pipe are not done, in the later stage of use, the hood may have small suction power of the hood, resulting in poor smoke exhaust, excessive operating noise, oil smoke backfilling, and severe machine shaking, etc., which will affect the use experience.

Second, what problems should be paid attention to in the kitchen ceiling.

1. Before installing the kitchen ceiling, it is necessary to do a good job of sanitation first, which can prevent dust from remaining in the pipe during the process of guaranteeing, and various situations are prone to occur in the later stage. Therefore, before storage, wipe the pipe and wall clean.

2. Pay attention to the height of the kitchen ceiling, if the height is not well controlled, it is likely to cause the kitchen to become short and more depressing. The height of the ceiling should be controlled at about 15cm, and the specific height should be determined according to the actual situation of the house.

3. The material of the ceiling is also very important, to see if the pants have the function of fireproof, waterproof, slag-proof and damp-control, and it is not recommended to use wooden keel. The common aluminum gusset ceiling is very good, even if it is used for a long time, it is not easy to age and change color.

4. During the installation of the kitchen ceiling, it is necessary to ensure that it has good sealing, otherwise the later use will be affected. Not all renovation workers are self-conscious, so if you have enough personal time, it is recommended to supervise on the sidelines.

1. Suspended ceiling.

2. Cabinets. 3. Smoke loading machine.

In general, the range hood is installed after the ceiling is suspended first, and the reasons are as follows;

1. The ceiling construction needs to set up the bolt in the roof drilling, which requires a certain space to operate, and if the range hood has been installed, the space is insufficient.

2. Ladders and other climbing tools need to be used during ceiling construction, so there should be enough space to place ladders in the horizontal direction.

3. It is recommended to install the pipe of the smoke machine and the exhaust pipe of the water heater first, and the concealed project must be done before installing the gusset.

The first is to install the ceiling in the decoration process, and then remove the corresponding gusset when installing electrical appliances.

Extended Materials. The usable area of the kitchen should be moderate, too large is undoubtedly wasteful, and too small is crowded, the reasonable area should generally be about 10 square meters, but also to ensure the natural lighting and reasonable ventilation of the kitchen space.

The layout should generally follow the working triangle principle of the kitchen as much as possible to ensure that the activity is convenient and fast.

Secondly, the size and discharge location of kitchen utensils and equipment should be suitable for the general habits of the owner, and the kitchen equipment should not only look at whether it is "foreign", but also whether it is used. For example, range hoods, no matter what design techniques are used in the kitchen, the quality of its function will be directly related to the use effect of the kitchen.

In addition, it is necessary to arrange or reserve a place for various electrical appliances in the kitchen, and arrange electrical outlets in appropriate locations.

The most correct installation sequence of ceilings, cabinets and range hoods is: install smoke exhaust pipes first, then install ceilings, and finally install hanging cabinets, cabinets and range hoods. Hope it helps.

The installation sequence of cabinets, ceilings and range hoods is to install smoke-proof treasures first, pre-embedded smoke pipes, then install ceilings, and finally install wall cabinets, cabinets and range hoods. The installation of the smoke proof treasure and the pre-embedding of the smoke exhaust pipe have a great impact on the use effect of the subsequent range hood, and the poor installation of the smoke proof treasure may cause the oil smoke to backfill, and the smoke pipe arrangement is too long and will affect the suction power of the smoke machine. The installation of the range hood needs to be measured first, and the height and position of the punching hole can be determined before drilling, and the check valve must be installed on the top of the range hood.

The family bought a range hood in Siemens some time ago, and before the installation, the master will come to inspect the flue, measure the size, and pre-embed the smoke pipe, which is worry-free and labor-saving, and it feels pretty good. Not only is the service good and professional, but of course, the quality of the range hood is also very good.