My Kingston USB flash drive is broken, the computer can recognize it, but it can t be formatted, it

Updated on number 2024-05-11
3 answers
  1. Anonymous users2024-02-10

    Caused by improper operation, the original file system is corrupted, manifested as unable to open (a few can be opened, can see the files inside, but will show write protection, unable to operate on it), unable to format, as far as I know, can only be re-produced through mass production tools

    It is recommended that you first use the chipgenius software to test what type of chip your USB flash drive is, and then go to the Internet** a corresponding mass production tool to reshape it for mass production or low level, in order to achieve the factory settings, this will be more troublesome, but no way, if it is a 1G, 2G disk, I usually recommend throwing it away, I hope you can succeed!

    Well, mass production tools recommend that you go to Digital Home** their mass production tool image package, which integrates almost all the mass production tools, you just try them one by one, remember, there will be many different versions of mass production tools for the same model of chip.

    By the way, if you want to save the data inside, it is recommended that you **easyrecovery this software to recover the data in your USB flash drive first, and then mass production, easyrecovery This software has a good reputation.

    Of course, the best way is to go to a dealer and ask him to repair or replace it for you.

  2. Anonymous users2024-02-09

    Note: Temporarily turn off the anti-virus software, and drive the firewall and other software, pay attention to the model of the main control, and try to match the mass production tool!

    ps: You can also find some low-level software in advance, such as: sdformater, etc.

  3. Anonymous users2024-02-08

    A few days ago, a user wrote a private message saying that there was a problem with his Kingston DT101 G2 16G USB flash drive. Plug in your computer and the display needs to be formatted. I don't I don't know what to do. Have you ever encountered this situation?

    Generally, there are two kinds of formatting, one is caused by logical problems, and the other is caused by hardware problems.

    I believe that many friends have tried to repair the USB flash drive with commands, such as win r, and enter chkdsk to repair. This is not recommended. In most cases, the USB flash drive can not be repaired well, and the data is damaged, and the gains outweigh the losses

    So, how can we tell which situation is causing the USB flash drive to prompt formatting?

    Right-click and select. After entering the interface, find [Storage] - [Disk Management], and then look at the page on the right. If the capacity of the USB flash drive can be identified, most of the faults are caused by logical problems. If there is no display media, it is a malfunction caused by a memory chip problem.

    After the verdict, how should it be resolved?

    First, open the USB flash drive with WinHEX. Once you're in, you'll see the data at the bottom.

    If there is no error from top to bottom, then it can be determined that it is a logical problem. If we can try to open and access it, we can scan it and fix it with some software. Of course, you can also solve the problem by mirroring the USB flash drive, so I won't explain it in detail here.

    If you can't see the capacity of the USB flash drive in Disk Management, it may be caused by a hardware issue. We can open the USB flash drive to test whether it is a fake USB drive quot. Fake USB disks are generally vinyl chips or integrated chips, while the main control model of real USB disks will be obvious.

    Recovering a fake USB flash drive is very difficult and can basically be discarded, while a real USB flash drive can cancel the chip, connect it to the device, read it, and then restore it.

    Have you learned the above methods?

    The Heart of the King of Champions 2 clicks to play

Related questions
2 answers2024-05-11

1. A U disk detection tool such as a chip wizard, decompress it, you can run it directly, and then click on the U disk on the displayed hardware information, and you can see the chip manufacturer or chip model of the card or U disk below. >>>More

9 answers2024-05-11

What should I do if the computer does not recognize the USB flash drive.

14 answers2024-05-11

How can I take a 4G file in about 5 minutes?

Samsung fake U disk test 400 trillion things use more than 5 points. >>>More

13 answers2024-05-11

Your U disk is expanded with a 4G chip, that is to say, the actual capacity of your U disk is only 4G, the 16G you saw before was processed by JS with software, and what you see is just an illusion, so when you copy something more than 4G, it is difficult to copy it in, even if you are admitted, the file will be broken or become garbled, and it may also be lost, and now there are many such expansion U disks on the market, especially Kingston's most, you should be especially careful when buying, so as not to be deceived.

3 answers2024-05-11

Summary. Precautions for the use of U disk: 1. The U disk generally has a write protection switch, but it should be switched before the U disk is inserted into the computer interface, and should not be switched in the working state of the U disk. >>>More