What is the reason why the 173F gasoline engine can t be pulled?

If the hand-pulled disc of the gasoline generator set is broken, it is generally recommended to replace it.

Here's how to solve the problem:

1. The hand-pulled rope is broken.

Answer: If the hand-drawn rope is broken, you can directly replace the hand-drawn rope, which is generally one or two dollars a piece. There is no need to disassemble the internal structure of the pull plate, and you can wind it directly. You can also go directly to the store that sells generator parts, where you can ask the master to help repair it.

2. The buckle of the generator hand pull plate is broken.

Answer: If this is the case, you can directly replace the pull plate. Generally, the hand-pulled plate is not very expensive, dozens of dollars.

It can be sold in physical stores or online, and the installation is very simple, and it can be installed directly by aligning the screw holes. The hand handle is pulled backwards (it is easy to pull with the right hand.) ）

3. The hand-pulled plate is inelastic.

Answer: The inelastic pull plate is also recommended to be replaced directly, the spring inside has been broken, and this is generally replaced without accessories.

Precautions for use: When using the pull plate, you must pull it gently, pull the pull plate lightly to get stuck in the engine and then start the unit, and you must not pull the pull plate at the beginning, which is easy to damage the buckle. It is also not possible to release the handle directly after the start, so that the rebound is easy to damage the casing and the hand-pulled disc.

Pay attention to the use of it to prolong the life.

If there is no smoke, it means that no oil is sprayed. Please check whether the low-pressure oil supply is normal and whether there is air in the fuel injection pump.

Whether the intake air is clogged or not.

Whether the fuel injection pump is aged and does not inject fuel.

Whether the injector is damaged.

Whether the cylinder is worn and the cylinder pressure is insufficient.

Whether the valve is not closed tightly. ......

Summary. Hello, I haven't used a 154F gasoline engine for two years to pull it can't burn.

Hello, I haven't used a 154F gasoline engine for two years to pull it can't burn.

The main reasons for the gasoline engine to pull non-combustible are as follows: see if the spark plug is on fire, pull out the positive cavity flameout line to see, check the seal with the elimination of gas, battery power loss, no high voltage, no crankshaft position sensor signal, the starter does not start (starter circuit), the starter starts but does not hit the car (the starter gear or gear ring is worn and seriously slipped), the fuel pump is faulty, you can check the shed to check these aspects, if you have a problem, come to Zhuge to repair the car to find me, help you feel the problem of repairing the car.

Sincerely answer every question for you! If you are satisfied, it is the best! If you have any questions, please keep asking!

Have a great day! Happy every day.

The starter does not rotate, turn on the starting switch, and the starter does not rotate. Possible reasons are:

The battery is low or the wires are loosely connected, and the binding posts are dirty, resulting in poor contact.

The starting solenoid switch coil is broken or the contact disc is poorly contacted.

The starter relay contacts are ablated, and the relay magnetic coil is broken or burned.

The internal armature shaft of the starter is bent or the bearing is too tight, the rectifier is dirty or ablated, the brushes are worn too short, the spring is too soft to contact, the armature coil or the magnetic field coil is short-circuited, broken or lapped.

Failure of the starting anti-theft system.