2 What is the difference between 4G and 5 8G wireless bridges?

The frequency band has better penetration and stability than the 5GHz band, but the overall speed is not as good as that of the 5GHz band. If there are a large number of barriers in the space, it is recommended to use a wireless bridge. If there is no barrier, the distance is not far, and a 5GHz wireless bridge can be used for speed.

1: First of all, the frequency is much higher, which leads to the higher hardware support he needs.

3.The point of application is more for personal networks such as BlueTool Zigbee (what we usually call the Picknet) for small data transfers or small networks. The amount of data is relatively small, and the requirements for debugging and testing equipment required are relatively low.

It is mainly used for broadband access networks, large data and long-distance 10km high-power applications. It is mainly used for 10 meters and 100 meters of small data volume and small power (very small radiation) network. It is mainly ordinary small consumer electronics or sports and health products.

PS: If there is no obvious difference for personal use, the enterprise network will be much faster and more efficient.

What is the difference between Wi-Fi and 5G bands?

and bridges which are suitable for home use.

Dear, hello, I'm glad to answer for you, and the bridge which is suitable for home answering wireless bridges to use these two frequency bands, respectively, and frequency bands, and because of the different standards they use and divided into different transmission rates, such as the division or or rock traveler, and the bandwidth of this wireless LAN can reach up to 11Mbps, but we are talking about two standards or, and is specified up to 54Mbps data rate. This is a point of difference, which is the difference that we will analyze for you. The second point is that the wireless bridge of the frequency band can be used as a WiFi hotspot, which can be connected to the Internet after being directly received by our computer or some WiFi devices, while this frequency band cannot be connected in this way.

The third point is that compared with the signal, the interference of the same frequency band is not so much, but the penetration ability is not so strong, and it is easy to be absorbed by metals or other obstacles. Fourth, the wireless bridge has a little stronger diffraction ability, for example, we have installed a wifi device at home, and you can receive your signal next door or a little farther away, so when you install such a device at home, you must directly set a login password, so that others can receive your signal, but you can't log in without a password. Fifth, because the frequency bands are used wifi, microwave ovens, Bluetooth, many home wireless routers use this frequency band, so it is easy to cause channel interference problems, and frequency bands are not easy to cause interference!

Sixth, the transmission distance of the equipment is longer than that of the equipment, and the rain attenuation is smaller, and the stability is better.

Yes, but you need to pay attention to the following points of the preparation beam:

1.The router can only bridge routers with sail slag compatible, not a separate 5G router.

2.The encryption method, SSID name, and password used during bridging should be the same as those of the primary router.

3.When using a router to bridge a 5G router, some devices may not be able to connect to the network or use the 5G band.

In summary, it is recommended to select a suitable router combination based on the actual situation to obtain a better network experience.

As the name suggests, a wireless bridge is a bridge between wireless networks, which can build a bridge between two or more networks, and the frequency band of the frequency band is not required to apply for a wireless license, so it is easier to deploy than other wired network equipment.