How to disassemble the Joyoung rice cooker and the disassembly steps of the Joyoung rice cooker?

1. First prepare the tools for removing the lid of the rice cooker for later use: Phillips screwdriver, flathead screwdriver, self-tapping screw, as shown in the figure. 2. Pry open the handle of the rice cooker lid first under the noodles, as shown in the figure.

3. Next, open the lid of the rice cooker and take out the rubber with self-tapping screws, as shown in the figure below. 4. Remove a screw at the exhaust hole on the lid of the rice cooker, as shown in the figure below. 5. Next, remove the screws on the sealing ring and ask, see Figure 6 below, and then remove all the screws on the rice cooker panel, see the figure below.

7. Finally, the lid of the rice cooker is removed, as shown in the figure below. Extended Information: Precautions for Rice Cookers:

1. Do not connect the power plug of the rice cooker to the power distribution socket of the lamp head or desk lamp. Because the wires of general table lamps are thinner, the current carrying capacity is small, and it is easy to age, or melt in heat. The power of the rice cooker is large, and the current is also large, which will make the lamp wire heat up and the wire skin melt, causing accidents such as electric shock or **.

2. Avoid bumping. The inner liner of the rice cooker is easy to deform after being touched, and the bottom of the inner liner is not well matched with the electric heating plate after the inner tank is deformed, and the heating is uneven when cooking, and it is easy to cook raw rice, so it should be handled with care when using. 3. The inner pot shell and electric heating plate should not be soaked in water, the electrical components are installed in the lower part of the pot body, and can only be wiped with a dry cloth after cutting off the power supply.

4. Avoid cooking too sour or salty food in a rice cooker Because the inner liner of the rice cooker is an aluminum product, using it to cook too sour and salty food will cause the inner liner to be eroded and easily damaged In addition, someone should be guarded when cooking rice and stewing meat to prevent the porridge water from overflowing into the electrical appliances and damaging the electrical components 5. When serving rice and soup, avoid using a metal soup spoon without pulling out the power supply, use a plastic or wooden bamboo spoon to serve it, and try to unplug the power supply before use. When washing the inner tank, you must use a rag, if the inner tank sticks to the pot or something, it is easy to wash after soaking it in water.

In order to avoid potential safety hazards or secondary damage caused by self-disassembly, the internal cleaning or disassembly and maintenance of the machine needs to be moved to after-sales processing, and the customer service center of Joyoung is linked.

Joyoung after-sales service outlets can be located;

You don't have to dismantle it yourself, just ask a repairman.

First remove the four small screws at the bottom of the pot, then disassemble the exposed bottom, and then remove the small cover plate of the rice cooker with a screwdriver.

Just remove the screws, then remove the handle, and then you can remove the upper cover, then remove the two screws, pry the upper cover open, and it is finished.

Solution: 1. Prepare a screwdriver for the size of the rice cooker. You can also prepare a basin to hold and disassemble large and small parts.

2. When ready, take out the rice cooker, turn off the power, unplug it, turn the rice cooker around, first remove the four screws at the bottom, and then you can pick up the bottom plate from the four corners, you will see the intricate wiring, and you can check the bottom problem.

3. Use a screwdriver to disassemble the small cover plate connected to the pot body. Usually there are four small screws here, and one is connected to the cooling distilled water.

The box can be cleaned to ensure the cleanliness of the rice cooker.

4. After removing the small cover, remove the handle of the pot, then unscrew the two screws on the lid and pry the lid open. Note: If you want to replace the cover, you also need to dispose of the connected plug first.

5. After disassembly, after checking the places that need to be checked and repaired, follow the disassembly steps upside down, and reassemble the rice cooker, and pay attention not to use the wrong screws.

First of all, to disassemble the lid of the rice cooker, you need to pry open the vent cover of the rice cooker lid first, and then use the self-tapping screw.

Remove the rubber seal from the inside of the lid, and the strip-shaped metal rod exposed inside the lid is the "top temperature sensor" of the rice cooker, and there are four screws around it, so use a Phillips-head screwdriver.

Unscrew these four screws one by one, and the disassembly of the lid is temporarily over.

Next, let's disassemble the body of the rice cooker. First of all, you need to remove the handle of the rice cooker by unscrewing the cover screw behind the pot body, removing the back cover, and then moving the handle up and down slightly until it can be moved to a suitable angle, and then the handle can be removed. Then use a pry blade to gently disassemble the inner layer of the rice cooker lid, be careful when dismantling, because there are many buckles inside and they are also very tight, and you must not use brute force to pry them to prevent damage to the buckles.

After removing the cover, you can see that there are two small screws inside, which are to fix the "top temperature sensor" mentioned above, and now it can be removed. Next, use a screwdriver to unscrew the 4 screws at the bottom of the pot, and then use the pry blade to pry open the upper half of the pot (the part with the display and buttons), and then you can see the circuit board, fan and various accessories of the rice cooker. Finally, you need to unplug the clip on the power socket of the rice cooker and remove the power cord socket, at which point you can separate the bottom of the cooker.

At this point, the rice cooker is completely disassembled.

Summary. Hello, I'm glad to answer for you, the disassembly method of the lid of the Joyoung iron kettle rice cooker is as follows: 1. If the lid is detachable, it can be directly disassembled and cleaned.

2. If it is non-detachable, it is more troublesome to disassemble, and it can be scrubbed with a damp cloth and cleaning agent for many times. 3. If you need to disassemble, first take off the small box containing water at the connection between the lid and the pot, and then unscrew the screw wire to remove the buckle of the small box. There is a small buckle at the screw, pull the small buckle down hard, and then twist the lid left and right with a little force to remove it.

But this method is prone to damage to the rice cooker, and many rice cookers nowadays are designed to be detachable and easy to clean. Related instructions: The inner lid of some products can be disassembled, one is to disassemble by pushing the buckles on both sides with both hands, and the other is to move the inner switch of the lid opening button upwards to disassemble, the specific operation method needs to be determined by the product model, or you can refer to the disassembly instructions on the manual.

Hello, I'm glad to answer for you, the disassembly method of the lid of the Joyoung iron kettle rice cooker is as follows: 1. If the lid is detachable, it can be directly disassembled and cleaned. 2. If Bidouguo is non-detachable, it is more troublesome to disassemble, and it can be scrubbed with a damp cloth and cleaning agent many times.

3. If you need to disassemble it, first take off the small box containing water at the connection between the lid and the pot, and then unscrew the screw wire to remove the buckle of the small box. There is a small buckle at the screw, pull the small buckle down hard, and then twist the lid with a little force left and right to remove it. But this method is prone to damage to the rice cooker, and many rice cookers nowadays are designed to be detachable and easy to clean.

Related instructions: The inner lid of some products can be disassembled, one is to disassemble by pushing the buckles on both sides with both hands, and the other is to move the inner switch of the lid opening button upwards to disassemble, the specific operation method needs to be determined by the product model, or you can refer to the disassembly instructions on the manual.

I'm an iron pot, and the lid must be removed before it can be repaired.

Pro, you can take a look at this method: 1. First prepare the tools for disassembling the lid of the rice cooker for later use: Phillips screwdriver, flathead screwdriver, self-sensitizing screws 2, pry open the rotation of the rice cooker lid first 3, then open the lid of the rice cooker and use the self-tapping screw to take out the rubber 4, and then remove a screw at the exhaust hole on the lid of the rice cooker 5, and then remove the screws on the sealing ring 6, Then return all the screws on the rice cooker panel to the wax part and remove it.7 Finally, the rice cooker lid will leak and slip and remove it.

The inner lid of some products can be disassembled, one is to remove by pushing the buckles on both sides with both hands, and the other is to remove the inner switch of the lid opening button by pushing the lid upward.

Joyoung rice cooker inner lid removal: please lift the upper cover, there is a button above, press the buckle up to remove the inner cover, the steam valve is removed on the inside of the inner cover, after the inner cover is removed, rotate counterclockwise and unscrew it.